Question about Office Equipment & Supplies

1 Answer

I just open my new printer and upon start up installation i accidentally plug the usb ..it just had power then it immediately stop...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 131 Answers

Go to Control Panel------> Add or Remove Programs------->
wait for it to load programs installed then scroll down and look for the printer software.


For example, if it is HP printer, look for H then remove Remove HP. It is arranged in alphabetically orders. Look for your printer's manufacturer.

Restart your computer, Unplug the USB then reinstall the software again.

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer shuts off immediately upon powering up mp830 printer


First of all do not plug your printer into a power bar.
Make sure all packing tape is removed and there are no jams.
Check your power cable to ensure it is plugged in and it is not damaged be sure there are no cracks or splits.
If the power adapter is heating up while the printer is off. you may just need a new power adapter.

Oct 24, 2013 | Canon MP830 All-In-One Printer

2 Answers

I cannot print or scan with the hp1315. Upon start-up I always have a test page printed. Any solution to these?


The "test" page is in fact a printhead calibration procedure. You have to put it on the scanner and press the scan button. This is what is shown on the page, if you read it. After successful calibration you will be able to print.

Aug 08, 2010 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

My brother mfc 5840cn won't install on my new laptop which has windows 7 my old laptop was xp


Brother has not released a printer driver specifically for Windows 7 and this model. You can however use a basic printer driver if the Windows Update feature of your operating system is set to "automatic:"

To set Windows Update to automatic, perform the following: (if you know it already is set to automatic, you may skip these steps)

1) Click "Windows Icon" (Start button) on taskbar

2) From the "Search Programs and Files" box type "change device installation" and start search

3) Click "Change device installation settings" - the Device Installation Settings window opens

4) If it is not already selected, select "Yes, do this automatically (recommended)"

5) Click "Save changes"

Now you are ready to have Windows search for and install the generic printer driver for your model. Your computer must be connected to the internet in order to complete this installation.

Note: If you have previously connected the USB cable, disconnect it from the computer and printer for now.

1) Power on your printer

2) Now connect the USB cable to the back of the printer, then to a USB port on the back of your computer (not to a USB hub or keyboard port)

3) Windows should now automatically search for and install the latest driver for your printer.

4) The "Your devices are ready to use" message may come up on your screen upon completion. You may have to click "Close [X]" to close this window.

You should now have a basic driver installed for your model of printer.






Jan 22, 2010 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

Canon pixma MP600, error code 5010, what does it mean ? Can not turn the printer on for any other purpose, no scanning, copying or printing.


There are a few things you can try:
  1. Power reset; press and hold the Power button until it the machine starts a diagnostic mode; if this doesn't turn on the machine, unplug it for 10 minutes and upon plugging it back in, see if the error reset itself
  2. Unplug all USB devices (including the printer) and reboot the computer. Once the computer has rebooted, plug in the printer, allow it to install (it should install automatically) and see if the error is corrected. Sometimes there can be a temporary conflict and the only way to solve it is to remove all other USB devices (this can work for external hard drives too).
The overall issue with error code#5010 is a scanner malfuntion. If the problem returns, check the ribbon cable as it runs from your scanner to the main logic board. If all is secure and you still have the problem, the printer may need a new logic board.

Nov 08, 2009 | Canon PIXMA MP600 all-In-One InkJet...

2 Answers

Can't change color cartridge


Unplug the printer from power and manually move the head to position. Remove the tape and plug the power in again. With the access door closed, the head/cartridge assembly should return to 'park'.

Aug 16, 2009 | Epson Stylus C40UX InkJet Printer

2 Answers

Toshiba 160 GB Hard drive is not seen by 'new' computer


I have had a similar problems with external drives that only plug into a USB port (no ext power adapter). It is very common that the power supply fed through the USB port is inadequate to power an external hard drive. Some enclosures have a external A/C input to resolve this. Also, some computers (motherboards) only have a select number of USB ports that are powered. Since this device is detected by your other computer and not on the new one, my next attempt would be to locate a USB hub with external A/C power. There is a good chance that this will resolve the problem. By the way, when you plug in the drive does it spin up?

May 03, 2009 | Toshiba 120GB USB 2.0 Portable External...

2 Answers

Computer will not completely read cd.


When you say it will not install do you mean the software stopped during install? Did windows not see the printer? With your computer running. Connecting everything for the printer. Connect the usb cable to pc & printer. Last thing to connect should be the power. When you connect the power cord & turn on the printer. Windows should show an icon by the clock. This icon is windows found new hardware. If this does not come up than your printer is either not connected correctly, you have a bad usb cable or usb port is not seeing the connection. Try another usb port. Each company has their own way to install printer software. Most want the printer shut off. During the install of printer software, a window will open and ask you to connect the printers usb or serial connector to pc & turn on power. The software will finish. Others want you to install the software completely into windows. When you shut down windows than you hook up the printer & power. If everything above failed you can try connecting the printer to another computer & you can try another printer for your Dell. I know, who has something extra like a printer you pc but this is all about trial and error.
Hope one of these suggestions work for you! Lastly, new Dell! You should have free support through dell even for things like this. Luck!!
Please vote...
map

Jan 30, 2008 | Lexmark X1150 All-In-One InkJet Printer

4 Answers

LEXMARK 1200 SERIES


Make sure if driver are properly installed...Go to bios and OPEN ALL USB PORTS...Check the USB HUB PORT IF THEY WORKING PROPERTLY!!!

Oct 17, 2007 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

Printer stopped working claiming the jobs have been 'stopped' and giving no explanation.


Hi Plug out the usb cable from the cpu. Try deleting the printers from the printers window(START, Printers and Faxes), uninstall the software. Power off the printer and unplug power adapter. After the printer has been deleted from the printer window, plug it back in and reconnect back to computer. Then try a new installation of the printer and software. The pending documents that have been stopped should now not be in the spooled documents.

May 02, 2007 | Epson Stylus DX4200 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...