Question about Blaupunkt Car Audio & Video

1 Answer

Six stacker in holden vz says error mech when trying to load cd

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers


This is a very common issue,in most cases it is suggested to change the cd player but before that pull apart the CD player if you find any mechanism bent then straighten it .Hope it helps to remove the error.
From the Manual;

CD Messages
CD ERROR PLAY: The CD cannot be read. The CD is
dirty, scratched, wet, or upside down.
CD ERROR MECH (Mechanism): If this message
appears on the display, it could be for one of the
following reasons:
• The CD is stuck in the player and cannot be
played, loaded, or ejected.
• It is very hot. When the temperature returns to
normal, the CD should play.
• You are driving on a very rough road. When the
road becomes smoother, the CD should play.
• The air is very humid. If so, wait about an hour and
try again.
• There may have been a problem while burning
the CD.
• The label may be caught in the CD player.
If the CD is not playing correctly, for any other reason,
try a known good CD.
If any error occurs repeatedly or if an error cannot be corrected, contact your dealer. If the radio displays
an error message, write it down and provide it to your dealer when reporting the problem.

Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting

Posted on Apr 09, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi i have a 2006 vz holden adventra six cylinder sounds like it is running on only 5 cylinders. OB2 diagnostic scanner is showing one code $07E8. What is this code indicating if anything. Cheers

Type that code into your google bar and results will give you all you need to know about the code. Most likely it's a manufacturer only code and has to be researched on line.

Aug 04, 2018 | Holden Cars & Trucks

1 Answer

My holden vz was running poorly then stopped.i put a new fuel pump in early this it its not pumping and i only have power to 1 pin on the fuel pump relay any advice where to look next?

Hi Kano my advise is take it to Holdens or call out a mech/elec tech to have a look there are a couple of easy checks which they can do which would be the next step. the reason I won't say what the checks are is due to saftey. If your not a tech you could cause more damage or even worse. they are electrical tests. Good luck

Jul 22, 2017 | Holden Cars & Trucks

1 Answer

Hi could you help with replacing an oil pump on a 3.6 vz holden cruiseman

I would go to the Just Commodores Forum for that and one of the guys there should be able to help with the pump issue if you supply all the details. here is the link to the VZ Forum section.............
Forum VZ Holden Commodore 2004 2006


May 08, 2016 | Holden Cars & Trucks

1 Answer

10 cd stacker in vs holden caprice. The cartridge is jammed in the stacker . How do you get it out and get it running again?

The guys on the Just Commodores Forum may be able to help you with that. Here is the link..................

Forum VR VS Holden Commodore 1993 1997


Jan 04, 2016 | Holden Cars & Trucks

1 Answer

Removing an alternator from a vz commodore

Just Commodores is a great website.

Jan 02, 2013 | Graco Spree 511 Holden Travel System...

2 Answers

'03 Honda Accord 6 disk changer won't load/eject

i had the very same problem with a six stacker in my ford, the stacker inside has come of its tracks even by one or two teeth so when the cd tries to eject it jams on the side walls because of this alignment, only way to fix is to take it out and realign. may need to get a mechanic or your dealer to do it like i did as the computer system was attached to my cd player. not sure about the accord but this is a familiar problem with all sorts of 6 and 10 stacker cd players

Jun 23, 2010 | Car Audio & Video

1 Answer

Eurovox radio/cd stacker in 1998 Holden Astra locked

Radio lock out codes are security related to discourage theft, so they are not published on the internet, if they were what would be the point?? any thief could get the code after stealing your radio. Contact the dealer for instructions and what info u need to get your cars unique radio code. How do I know this isn’t a stolen radio? The dealer will require the serial number off the radio and proof of ownership of the car it came from.

Sep 16, 2009 | Car Audio & Video

1 Answer

Have a Blaupunkt AM FM Radio/In-Dash Ch Cgnager (6 stacker) in a 2003 Holden Commodore. After ejecting the 6th one of the CD's succesfully, get "CD Error mech" message and it will not eject the...

We eventually tried loading another CD to fill the one vacant spot we knew was in the changer even though we'd tried that before without success. This time it seems that we fluked it just as it was trying to eject CD 1 again and - somehow - the CD we were tryng to insert must have lifted the rim of the one that was stuck and it suddenly ejected. The remaining 4 CD's that were inside the changer but not even recognised, then started re-loading so it appears that they were all jammed up together. Once they'd reloaded we were able to eject them all successfully then reload.
We're not sure but think that it may have happened when the eject button was originally pressed once to eject CD 6 then, in error, held down for a 'eject all' procedure and the changer has become confused with both instructions.

Jun 01, 2008 | Blaupunkt Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

1,136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blaupunkt Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers


Level 3 Expert

83772 Answers

Are you a Blaupunkt Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides