Question about Panasonic PT-53WX42 53" Rear Projection Television

1 Answer

No picture. when press power button it blinks 5 times

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 5,138 Answers

You need to check the hori output Transistor and the 2k capactior small blue cap,it feeds to the Transistor.If they are OK then Replace your STK ICs they are Big Black ICs and will have PN on them,example STK392-110
Mats has ICs 1-800-628-1118

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant print anymore print counting is almost full. how to reset count


try this

Manual reset methods several EPSON Stylus Color. Actually there are two methods to reset epson printers counter, that is using software resetter such as adjustment program or SSC service utility or using manual by combination pressing button on the printer. If Reset using software resetter you can follow the way of usage the software but sometimes software resetter for the printer is not available. The only way to reset the printer if software resetter not available you can use manual reset.
The Following manual reset for some EPSON Stylus Color Printers:
1. EPSON Stylus Color
Pressing and holding ALT+FONT+LOAD+PAUSE buttons combination
press POWER button
Release all buttons
2. EPSON Stylus Color 300
3. EPSON Stylus Color 400, 600
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until you will see blinking INK OUT and PAPER OUT leds
Release all buttons
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
4. EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.
5. EPSON Stylus Color 680
Pressing and holding LOAD/EJECT and CLEANING buttons,
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.
6. EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons
press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
7. EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led
Release all buttons
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
8. EPSON Stylus Color 800, 850
Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.
9. EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button, You will see blinking INK OUT led
Release all buttons
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.
10. EPSON Stylus Color 3000
Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons
turn on printer.
Release all buttons.

Mar 17, 2011 | Computers & Internet

1 Answer

Hello, When the power button is pressed it gets power than immediatly turns off. The screen never comes on on with a picture either. Any ideas? THANKS :)


If model number listed is correct----do the self check:

When power light goes out, on the front of the set press and hold both the Menu and input buttons at the same time for at least 5 seconds and release both.

Power light should blink a error code: most common is 2 blinks, 2 blinks, a pause and then it repeats at lease 5 times.

Let me know which error code and I will tell you what it means.

SD TECH

Aug 14, 2010 | Mitsubishi WS-55511 55" Rear Projection...

3 Answers

Canon i9950, Operator error,5 amber blinks


  1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the printer should turn off, if not, press the Power button once more.
  8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Jan 02, 2010 | Canon i9950 InkJet Printer

2 Answers

When I turn the printer power on, The lights are blinking.


  • Unplug Power Cord

  • Hold POWER and RESUME buttons

  • Plug in Power Cord

  • Release buttons after the printers starts up

  • Hold CARTRIDGE and RESUME

  • Press POWER

  • Release all buttons after the beeps

  • Press CARTRIDGE 16 times

  • Press RESUME

  • Unplug the Power cord

  • FINISH
  • Nov 12, 2009 | Canon BJC 55 InkJet Printer

    1 Answer

    Shutdown & error led blinking 2 times


    Shut off your projector by swith on the back near the AV inputs, leave it off for about five minutes. Then switch it back on, manually press the power button, let it start for about 5-10 seconds then continue to hold power button until picture appears. It worked for me, good luck to all.

    Mar 24, 2009 | NEC HT1100 Multimedia Projector

    2 Answers

    Canon IP3000 error code



    read entire solution first, see the 6 modes section.
    First thing you need to do is print an EEPROM information page, step number 2 below.
    Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.
    Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
    Service Mode Operations
    With the printer powered off, hold down the "Resume Button" and press the "Power Button".

    While holding down the "Power Button", release the Resume Button" and press the "Resume Button" twice in succession. Now release the "Power Button".

    The indicator will blink in green and remain lit in green.

    Select one of the following service mode functions by pressing the “Resume Button” the specified number of times.

    1 time = Service test print.
    2 times = EEPROM information print.
    3 times = EEPROM initialization
    4 times = Waste ink counter resetting
    5 times = Destination settings
    6 times = Print head deep cleaning

    Then press the “Power Button” one time to perform selected function.

    If you press the "Power Button" two times it will take you out of service mode.

    This information is listed above in this thread and many times in other Canon threads in this forum. I simplified Canons wording so I could remember the service mode functions easier.





    I got service error 5100 after a paper jam sometimes 5 times blinking orange. in my PIXMA IP 3000

    to fix it
    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not,
    press the Power button once more.
    8. Your printer should respond as normal..

    or: and Also;
    Unplug unit, hold power and reset button down then plug it in while still holding both buttons down;
    Then to step 3 above.

    Feb 19, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

    1 Answer

    Green and orange lights flashing, saying service error 6000


    read all first!
    you didn't say how many blinking
    and in what order so ...
    First thing you need to do is print an EEPROM information page, step number 2 below.
    Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.
    Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
    Service Mode Operations
    With the printer powered off, hold down the "Resume Button" and press the "Power Button".

    While holding down the "Power Button", release the Resume Button" and press the "Resume Button" twice in succession. Now release the "Power Button".

    The indicator will blink in green and remain lit in green.

    Select one of the following service mode functions by pressing the “Resume Button” the specified number of times.

    1 time = Service test print.
    2 times = EEPROM information print.
    3 times = EEPROM initialization
    4 times = Waste ink counter resetting
    5 times = Destination settings
    6 times = Print head deep cleaning

    Then press the “Power Button” one time to perform selected function.

    If you press the "Power Button" two times it will take you out of service mode.

    This information is listed above in this thread and many times in other Canon threads in this forum. I simplified Canons wording so I could remember the service mode functions easier.



    PIXMA IP 3000 service error 5100

    I got service error 5100 after a paper jam sometimes 5 times blinking orange. in my PIXMA IP 3000

    to fix it
    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not,
    press the Power button once more.
    8. Your printer should respond as normal..

    or: and Also;
    Unplug unit, hold power and reset button down then plug it in while still holding both buttons down;
    Then to step 3 above.

    Feb 19, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

    1 Answer

    Blinking orange 5 times and 1 green


    Try this:
    Most of the time when a printer used for a certain period the ink would dry out and caused an error message. What you do is to replace with a new inks pad inside the printer and reset that error message. Once it is done, your printer will work again!

    For Printer Model: Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000:

    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not, press the Power button once more.
    8. Your printer should respond as normal.
    Please remember to rate all Techs who assist you for free :)

    Oct 04, 2008 | Canon BubbleJet i560 InkJet Printer

    1 Answer

    No picture or sound


    This model is equipped with a self-diagnosis feature to help with diagnosis of shutdown problems, to activate this turn the unit on let it shutdown then press the input and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a two digit sequence. This will be one set of blinks a short pause then another set of blinks, this will repeat 5 times. 1 - 2 = no error detected 2 - 1 = X-ray protect (high voltage or beam current) 2 - 2 = Short protect (short protect monitors low voltage supplies) 2 - 3 = Deflection protect (this could be loss of vertical or horizontal deflection) 2 - 4 = Vertical protect (usually loss of vertical from the source)

    Sep 08, 2007 | Mitsubishi VS-50605 50" Rear Projection...

    Not finding what you are looking for?
    Panasonic PT-53WX42 53" Rear Projection Television Logo

    39 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Panasonic Televison & Video Experts

     Grubhead
    Grubhead

    Level 3 Expert

    5047 Answers

    The Knight
    The Knight

    Level 3 Expert

    74106 Answers

    Jaime Hernandez

    Level 3 Expert

    2318 Answers

    Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...