Question about Hitachi 43FDX01B TV

2 Answers

Hitachi 43FDX01B Convergence Problems

The first problem I had was that there was a triple color shadow around the pictures on my tv. I had lost the remote quite some time ago so I bought a replacement one off of replacementremotes.com or something like that. I was performing the convergence adjustment when I encountered my next problem. I was able to line up the red and green lines perfectly so i got the yellow cross on my tv. When i tried to align the blue with the other two, i could only get them to match up horizontally but they are still about a 1/4 inch apart vertically. So now when i do the convergence adjustment i have a white horizontal line, and a yellow and blue line for the verticals. What can I do to fix this?

Posted by on

  • 1 more comment 
  • emmuttut Aug 09, 2008

    I have the same problem, my convergence comes up fine but the blue drops or looks like a mountain range. Left top is high, middle is down to eye level and right top is high also. It is a strong blue line and then fades to normal half way down. Any solutions would be helpful. I have cable in the back, not to HD and PS3 to HD.

  • Speeddymon Mar 23, 2009

    X480301 is the part number for the convergence repair kit. I found the part number on another site and was able to find the kit itself on encompassparts.com

  • kirk_willis2 Mar 24, 2009

    I have a slope in the upper left corner and also a line horizantally 2/3 across the screen left to right which has the triple color distortion. the convergence is off at the left and right ends horizantally and 1 inch from the top vertically. What do I do, shoot the TV?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Unfortunately you need at least one IC and you need to check the IC resistors it is not uncommon for them to burn out Hitachi has a convergence fix kit avail I do not know the part number off the top of my head hope this helps

Posted on Sep 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Hitachi remote part # HL01643........I like the original remote
to do adjustments.................T.

Posted on Aug 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv on the right of the screen is blurry,with green around the images.


Ur tv have a problems known as a convergence picture problems,it is dead.The tv have R,G,B colors lines mis alignments,tv have colors shadows pictures or 3D pictures look alike?Yes,than the tv have a dead tv convergence board.The tv convergence board must require changes 2 STK convergence ICS and some or all of it resistors too.After the tv convergence board is fixed,the tv convergence picture problems will be solved.The tv shop,will cost u like $300-350 for parts and labors.

Apr 26, 2011 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Dark shadow spot on bottom of screen


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Jan 01, 2011 | Hitachi 46F500 46" Rear Projection...

1 Answer

Red glow in Hitachi 50v500 television


Tv have a problems know as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors too.These parts must be replaced on the tv convergence board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 24, 2010 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

Hitachi 62 v569a has a blue gost line around the sides i replaced the bulb and didn't seem to help can u give me a idea what might be wrong thx


The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts,must be replaced on the tv convergence board to solved tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 17, 2010 | Hitachi 62VS69 62" HDTV

1 Answer

51 Hitachi rear projection 6 years old, can't get it to focus, Has sound. Can only get the picture to come in abpout 80%. Around the perimeter, sports scores and subtitels are not readable. Used the fucus...


Flash Focus magic button no longer work.The tv have a problems known as a convergence problems,it dead.Tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures problems.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the tv convergence board to solved the tv convergence picture problems.The shop,will cost $300-350 for parts and labors.

Oct 13, 2010 | Hitachi 51F500 51" Rear Projection...

1 Answer

I just turned on my tv and there are shadows around everything on the screen. Purple ones on the left of the object and green on the right. I was just watching it last night and now it's doing this. ...


Very common problems with the DLP projection tvs.The tv have a problems known as a convergence problems,it dead.Tv colors lines R,G,B mis alignments,have colors pictures shadows or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 12, 2010 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

I have a hitachi ultravision digital hi-def TV model number 53UDX10B from December 2001. The words in its own menu and from my cable box menu are distorted, as well as some words appearing in commercials,...


The tv problems known as a convergence problems,it dead.The colors lines R,G,B mis alignment,have shadows colors pictures or 3D pictures.The tv convergencce board require changing 2 STK convergence ICS and some or all it resistors are dead.The shop,will cost $300-350 for parts and labors.

Sep 11, 2010 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

My Hitachi 43fdx01B went from a perfectly clear picture to one with red "ghosts" and very blurry. I my TV toast?


No,ur tv have a problems,known as a convergence problems,it dead.Very common problems on the DLP tvs design flaw.Most commom problems are R,G,B mis alignment,will not align,Colors shadows pictures,3D pictured and blurry?The tv convergence board require changing the 2 STK convergence ICS and some or all it resistors are dead,must changes to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 26, 2010 | Hitachi 43FDX01B TV

1 Answer

Colored lines through my tv


Convergence problem; requires 2 STK392-110 ICs and possibly burnt resistors replaced.

Apr 26, 2008 | Hitachi 43FDX01B TV

1 Answer

Problem in Hitachi 43" tv


Common failure called convergence mis-alignment.Needs
convergence IC's replaced by skilled technician.Good set
to keep going a few more years.............T.

Please rate this solution...................

Nov 15, 2007 | Hitachi 43FDX01B TV

Not finding what you are looking for?
Hitachi 43FDX01B TV Logo

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72601 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...