Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

After I linked to website 192.168.0.1 and using the user name as 'admin' as well as the password 'admin'. It cannot connect to the setting page. What can I do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 32,281 Answers

If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Apr 09, 2011

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mattballew
  • 89 Answers

SOURCE: CAN NOT OPEN DEFAULT USER NAME / PASSWORD, ADMIN/ADMIN

On the back of the device, There is a small reset button, Hold that with a pen for 30 Seconds, that will reset everything, Including that password.

Posted on Nov 25, 2008

bhushan_soft
  • 14 Answers

SOURCE: 192 168 1.1 requires a

enter router company name and model number for default username an password in google u will get it.
But if default password is changed then
u can reset it also manually or by command.

Posted on Feb 18, 2011

  • 1027 Answers

SOURCE: can't find password for my router. tried: user

on this page:
http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G
you can download user guide for your router. Try to reset the router.

If I could be of further assistance, let me know. If thishelps or solves the issue, please rate it and give a testimonialfor my response.

Posted on Mar 10, 2011

Geekman
  • 32281 Answers

SOURCE: I have set up the D-link DI524 router and it

If the default password has been changed then -

To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ON until the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)

You can now change the default password.
You can now configure the wireless settings.

Now configure the wireless card in your computer/laptop with the router's wireless settings.



To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-

http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Apr 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i set a password


Router's password could mean 2 things. First password for you to open router's configuration page or password for you to connect wireless to your router.

Configuration's password:
-Logon to your router configuration page
-Please to the TOOLS and ADMIN Tab. You there you can change the admin user name and password. If you do not have the user name and password, please check for the default user name and password on the router's manual. If default user name and password won't work reset the router. Press and hold down the reset button or pinhole on the back of the router for 10 seconds. Then re-enter user name and password again. It should work this time.

Wireless Security Password:

-Logon to your router configuration page
-Under SETUP and Wireless Settings tab you will get an option to change the wireless password

May 21, 2011 | D-Link DIR-615 Wireless Router

3 Answers

Hot to secure my router from my neighbors using them. thanks


click this link to open the router login http://192.168.1.1/

When asked for username use admin and password leave it empty
then goto

SETUP -> WIRELESS SETUP -> MANUAL WIRELESS CONNECTION SETUP -> WIRELESS SECURITY MODE and select "Enable WPA > WPA -> WPA Key -> create your own password and save now if you want to access the Wireless connection you will have to enter the WPA key you just created.

Apr 11, 2011 | D-Link DIR-600 Router

1 Answer

I forgot my security key no.icannot gain access to internet.please help.


go to your internet browser type 192.168.1.1 then either it will take you to the page or ask for a password and user name (the default user name is "admin" and the default password is "admin") when your on the linsys page click the management tab there you can change the security key. now change it and scroll to the bottom of the page and click save settings after your done connect to it using the new password using windows wireless network connection

Apr 02, 2011 | Linksys WRT54G2 Wireless Router

4 Answers

I forgot the username and password of my dir-600 2.03 ver


Use the reset button on the back of the router. Hold the button down until the router resets and then re setup the router. You may need to unplug the router from the LAN and wall. Hold the reset button down and plug the power cord back in. Continue holding the reset button and let go after a few seconds. Plug the internet cord back in and re setup. inlutero.jpg

Feb 28, 2011 | D-Link DIR-600 Router

1 Answer

I forgot my user name and password how do i reset it!


Press RESET button for 10 seconds it is in back side of router. Hold it for 10 seconds so all settings defaults. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Nov 06, 2010 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Forgot password and user name??


If you forgot your user and password of router then press RESET button of router for 10 seconds it is in back side of router. Then all settings defaults. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . If you want to secure wireless then enable WEP in wireless security enter password there it is your password to connect wifi.Then save settings and restart router. Let me know if you need further assistance. Thanks for using FixYa.

Sep 05, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I am trying to find out the password I set on the wireless router.


You can find it in router configuration page. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless settings then wireless security then note down the WEP key it is your password to connect wifi. Let me know if you need further assistance. Thanks for using FixYa.

Aug 12, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have no cd to set it up


You can set your router settings without disk too.
You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
If you need user name and password for connect to your service prtovider then configurayour router as PPPOe .
Enable DHCP if you want to get ip from router.
Click on wireless settings enable wireless then enable WEP Security then add WEP code .It isyour password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Feb 07, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

2 Answers

Need Code


connect your router to computer with ethernet cable.
Then you can access it with following link.

http://192.168.1.1
or
http://192.168.0.1


type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.Click on wireless and If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.
Let me know if you need further assistance.

Nov 18, 2009 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...