I jailbreaked using blackra1n and firmware 3.1.2, after 1week i am unable to use the touch screen to slide to unlock

restore with iPhone1,1_3.1.2_7D11_Restore.ipsw

then jailbreak it using blackra1n.exe

after jailbreak simple connect the phone with normal mode not in DFU mode

again restore with custom firmware :iPhone1_1_3.1.2_7D11_Activated_Custom_Restore_iLi keMyiPhone.ipsw

after restore Check the phone

Hello,
The way to jailbreak your iphone is if you have Version 3.1.2 then you can use blackrain but if you have 3.1.3 you need to use spirit.
www.blackra1n.com
www.spiritjb.com

Free Iphone Unlock
How to Jailbreak And Unlock Your iPhone With BlackSn0w and Blackra1n in Windows Posted by iunlock under Unlock on Monday Mar 1, 2010 google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad); Previously, we’ve released a tutorial to jailbreak and unlock iPhones for Mac Users. Now Windows users can do the same with their iPhone 3G or iPhone 3GS by following this short tutorial. Remember this is specifically suited for those running Windows.
Please ensure first that you have the iPhone OS 3.1.2 installed as well as a 05.11.07 baseband. If you have the 5.12.01 baseband or higher though, unfortunately you cannot jailbreak yet. Meanwhile if your baseband is lower than the prescribed 05.11.07, you must first restore to the 3.1.2 firmware in order to proceed. Do this by starting up iTunes, selecting your iPhone from the device list, then holding down the option key and selecting restore. After this minor change, you can now push through with the tutorial.
Keep in mind, blackra1n only supports a tethered jailbreak. This simply means once you have successfully jailbroken your device, do NOT ever let your battery die. Anticipate it and charge immediately once you notice it signalling it’s on low. When you allow your device to die, you would still need to reconnect it to the computer and specifically use blackra1n simply to reboot it.
If you have answered yes to the requirements above, then you’re good to go. But a word of caution to all: hacking your iPhone could void it of its warranty for good. So please proceed at your own risk. It is necessary to for safety and security purposes to backup your iPhone before beginning with the process. Once you’re done, we’re ready to begin.
Easy Guide to Jailbreak:

1. Visit the blackra1n website, http://www.blackra1n.com, using any web browser of your choice. Then select the Windows logo located at the bottom of the screen.
2. When a prompt appears, download and save blackra1n.exe to your device. Then double click the executable file from where you saved it to launch the program.
3. From here on, your iPhone or Ipod needs to be connected to the PC.
4. You are now officially ready to start the jailbreak process. Proceed by selecting the “Make it ra1n” button.
5. After this, you would notice that your iPhone is now in recovery mode. Instead of the recovery mode screen, the display features a picture of Geohot. Then you’re iPhone would reboot.

Jailbreaking has now been completed. You will notice a popup message informing you that blackra1n is free software and you can donate to Geohot at [email protected] if you appreciate the software. Select ok to finish the process.
At this point, you’d see the blackra1n icon on the springboard of your iPhone. You can proceed further to unlock your device thereafter following these simple steps:

1. Ensure you have an internet connection first. Then launch the application by selecting the blackra1n icon.
2. Choose the installer application of your choice then select snow if you wish to unlock your device. Press install located at the top right of the screen if you want to proceed.
3. Blackra1n will now begin to download and install the packages you selected.
4. When completed, you would see a post install log for sn0w. CommCenter would automatically be restarted. But if your carrier does not support 3G, simply disable it. Then select the close button to continue.
5. Blackra1n would now respring your iPhone. Now you can find the installer package right at your springboard.
6. Once the package is confirmed to be working properly, you can now choose to uninstall blackra1n by selecting the “uninstall blackra1n” button inside the application. By doing this, you are opting to remove blackra1n from your springboard.

Congratulations! You have successfully jailbreak and unlocked your iPhone easily by yourself.

BlackRa1n is only for ver 3.1.2 unlocking. kindly get the firmware download from redmondpie.com and then jailbreak it from blackrain.. it ll be done in an instant .. do comment / vote.

Try following the instructions here to get it working again

http://jacko0.wordpress.com/2009/12/19/how-to-reset-an-unresponsive-iphone-and-get-it-working-again/

aparently debbie42 didnt read the question.

yes there is another way to jailbreak your iphone.

you can download custom 3.1.2 firmwares that, when installed, are jailbroken. you do not need to use blackra1n.

Unlock is still not available for 3.1.2. Jailbreak is available, but that is probably not what you need. There is NO unlock available so do not believe the guys trying to sell you a fake unlock online. Search for the iPhone Dev Team, redsn0w, blackra1n all on google, just as I typed them. That should get you started as those are all where the jailbreak and unlock software comes from. If you wish to jailbreak, use blackra1n, and find that by searching google.

But as of now, 2:13 AM ET on Saturday the 24th of October, believe me, there is NO unlock solution, don't believe anything else.

1. Backup your iPhone in iTunes and restore.
2. The 3.0.1 and 3.1.2 firmware's Blackra1n can jailbreak them.

Well if its not responsive ya I am afraid its bricked. You might want to try to recover but it seems like you did that already i hate to spread bad news.

thanks please rate

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

its not a hardware problem brothe as i am also facing same problem...actually it all happen with jailbreaked iphone...ad i'hv checked its deep root directory there an application called "lockdown" is the main cause of that...nd still there is no crack of that.....
two days back i unlocked my iphone 2g it was working properly before that i was facing the same issue as you are facing....but now again it went to the same problem....
i hav a temp solution of that...
use blackra1n u can find it from blackra1n.com
nd for few seconds slide to unlock will work
or u can use it by connecting it with ur itunes ...connect usb wire nd slide it again nd again...u can unlock it..bue its just temp