Question about Health & Beauty

1 Answer

My reset buttonand the motor conection where it plugs into the little black box have been bypasted my controller went out i got a new one when i pluged it up it had 4 yellow 3 red 1 green light on it can i by pass that black box completely to get my chair back running

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 692 Answers

Why do you want to byass the power module? the lights you mention are ok just need to charge your batteries a little longer to get all the green lights on. If you changed the controller, plug all your cables into the new one and try the chair it should work like its supposed to. I really don't know what specific problem you have. Is the chair not working when you tun on the joystick? are you getting any flashing lights on the joystick? are your freewheel levers in the drive position? Let me know something morwe specific Thanks

Posted on Apr 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset anti theft system


the remote starter "brain " should be a black box under dash on driver side will have wires with plugs going to it usually will have at least 1 6wire plug that if followed there path they will lead to key ignition switch. if you find this box unplug it untill you can get remote starter repaired.

Oct 30, 2013 | Chevrolet Cobalt Cars & Trucks

1 Answer

Rc car fix


atach Binding Conector on reciver and Servo only plus Battery went open Transniter hold Trainer swith open transmiter the light will blink on reciever pull the bind plug the light eill stay on .. Went you plug the Motor in the right conection and you here a constant be be be it mean the speed control is defectuel or burn

Jun 13, 2013 | Toys

1 Answer

I was trying to install a fan control switch on my Patton floor fan and took the 3 speed switch out and disconnected the wires and cannot figure out what wires (too many colored wires) to connect to the 2...


Thr issue you are having you need to look on the motor and see if there is a diagram but you have to use the grey and white for a capacitor because i have an older fan that has no capacitor. and use the red for high

Dec 28, 2010 | Patton U2-1487 Floor / Box Fan

1 Answer

I have to spin the little black motor to get my furnace to come back on. It's an intertherm. The motor and black control box is brand new.


is there a start capacitor?if so replace it. often the new parts I buy lateley are cheaper than origional.

Dec 24, 2010 | Heating & Cooling

2 Answers

Wont spin


Yes you will find a belt under the bottom of the machine. Check out first that it did not just over balance and cut out while spinning if so you will need to hit the reset buttonand check out spin cycle. Hope this helps

May 25, 2010 | GE WDSR2080D Top Load Washer

1 Answer

Just recently the heater in our 2001 T & C will not turn off. Turning the power off to the control will not stop it from blowing


you need to replace the blower motor resistor,to find it easily,locate blower motor under glove box,follow the wires from the motor ,about 12" away they plug into a little black box,that is the resistor

Dec 18, 2009 | 2001 Chrysler Town & Country

1 Answer

Jacuzzi nova 532 motor run's but won't stay running


If it has the little oval off/on button, it sounds like the control box or off/on button is bad. If you have access to the pump assembly, follow the pump power cord to the little black box (zip tied to a tube up high), this black box has a small cable that goes to the off/on button. unplug the pump from the box and plug the pump into the power outlet. it should run continuously. If it runs, you need a new control box or /offon button. Buy the off/on button first, as this button is prone to water getting into it, and costs less than the control box.

Mar 25, 2009 | Whirlpool 5' Jacuzzi Tub Bathtub Cetra...

2 Answers

Front blower motor doesn't work, rear does


yes, all blower motors have them to control their speed, High, medium, low.. etc. I earn nothing by helping you, but my rating, a fixya rating and I will walk you through this

Dec 20, 2008 | 2005 Chrysler Town & Country

1 Answer

Help with ceiling fan


black with black is for fan motor from swith red with red is for light fan from switch blue goes conect to black thats power for the remote white wuth white thats streat line is call comun or negative green withe green that streat conection for ground protection

Dec 26, 2007 | Hampton Bay 46175 Cameron II Plus Ceiling...

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...