Question about Canon PIXMA MP530 All-In-One InkJet Printer
I've tried all of what the others had done, and every time i try to copy or print i hear a clicking noise and the code reapears. I cna reset it by hitting the stop/Reset key. and all over again the code comes back up. The flap in the bypass area is in the up position. Please help me with this. and I'll love you forever. Thank You Very Much
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Canon MP530 error code "5C10" ?
I had a similar problem. I replaced all the ink cartridges and cleaned the printer. I checked the nozzles to be sure that they were clean and cleaned the area where the cartridges set. It took a little while but my printer is working again. Mine makes a clicking sound after you push the copy button but still pulls the paper through. Does yours pull the paper through at all?
Posted on Oct 22, 2007
SOURCE: canon MP600 printer
sounds like the inner cover is not seating properly. so, perhaps there is something amiss inside, making that cover not latch cleanly? do a visual inspection(got one of those dental type mirrors?).
Posted on Mar 10, 2008
SOURCE: error is inner cover is open.
I have had this error message and no matter what I do, the message won't clear and the printer will not operate. I have closed the "inner door", powered down, even unplugged it from the computer to reset. The message will clear when I restart, but as soon as I try to copy or print, it looks like it will work, but then I hear a slight click and the message comes back. The door isn't open, but something is communicating that it is. Anyone else have this problem?
Posted on Jul 31, 2008
If the 6 flashes are accompanied by an on screen message #5400, this is a "Service Call Error" code.
This code indicates the following;
Internal temperature error 
The solution to this is the following part replacementl
- Logic board ***'y (QM2-1548) *1
*1: Before replacement of the logic board ***'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or
more, also replace the bottom case unit (QM2-1205) or the ink absorbers (QC1-4222 / 4223 / 4224 / 4263 / 4264 / 4864 / 4221 / 4257) when replacing the
logic board ***'y.
[See Section 3-3. Adjustment / Settings, (6) Service mode, for details.]
Posted on Oct 02, 2009
The inner cover is a flap on the inside in front of the carriage when it is at rest when the cover us open. You had to flip the inner cover down to access the ink cartridges.
Open the cover. The inner cover is in the center and need to be flipped up.
Posted on Dec 05, 2009
Tips for a great answer:
You can check the status of each ink tank according to the way its lamp flashes.
- On: The printer is ready to print.
- Slow flashing (at about three second interval): Ink is low. Prepare a new ink tank.
- Fast flashing (at about one second interval): Ink tank is empty, or the printer is not ready due to an error.
- Off: An error has occurred and the printer is not ready to print.
Aug 28, 2012 | Canon PIXMA MP530 All-In-One InkJet...
Mar 03, 2011 | Canon Computers & Internet
Feb 19, 2011 | Canon PIXMA® MP530 All-In-One Printer
Apr 15, 2010 | Canon PIXMA MP530 All-In-One InkJet...
Apr 06, 2010 | Canon PIXMA MP530 All-In-One InkJet...
Feb 10, 2010 | Canon PIXMA MP530 All-In-One InkJet...
Dec 08, 2009 | Canon PIXMA MP530 All-In-One InkJet...
Sep 25, 2009 | Canon PIXMA MP530 All-In-One InkJet...
Jan 11, 2009 | Canon PIXMA MP530 All-In-One InkJet...
Mar 15, 2008 | Canon PIXMA MP530 All-In-One InkJet...
436 people viewed this question
Usually answered in minutes!