Question about PC Desktops

2 Answers

I paid n paid n this is all i get......what is it????

Ocal machine: installation failed
Installation:
Error: Action failed for registry value HKLM\SOFTWARE\Classes\AvgDiagFile\DefaultIcon:: creating registry value....
Error 0x80070005

Posted by on

  • Anonymous Aug 08, 2008

    I have got the Error: Action failed for registry value HKLM\SOFTWARE\Classes\AvgDiagFile\DefaultIcon:: creating registry value....
    trying to install AVG 0.8 If someone comes up with the answer to this one please help me!

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 659 Answers

Bob please click on the ask me button to continue our session once you have rebooted

Posted on Aug 06, 2008

  • Wesley Gardner
    Wesley Gardner Aug 06, 2008

    ok Bob what I would like you to do is the following:



    1. Click on start------>settings------->control panel------>add remove programs------->then remove any antivirus software installed highlight them by clicking on them to remove them.



    2.click on Start--->Run--->type: msconfig---->in the general go to diagnostic startup---->accept, close and reboot

    Install the software it should install now.

    Then reboot

    then goto

    Start--->Run--->msconfig---->in the general options to to normal startup--->accept, close and reboot

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Well im not a PC expert, but HKLM/ stuff are registry and Key Values, they effect your systems entire performance from startup through. If you have bad key files you need to have someone who know about bios setups look at it, usually if its a bad keyfile you need to wipe the hard drive and reinstall windows. Atleast thats what i did the last time i got a message like that at pc startup.

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Local machine: installation failed Installation: Error: Action failed for file avgmfx86.sys: starting service.... Error 0x80070002


Could be bad media.

Try another install cd. If the same problem occurs, then the hard drive probably has bad sectors.

Feb 24, 2009 | PC Desktops

Tip

Error messages when you try to install Windows XP Service Pack 3


When you try to install Windows XP Service Pack 3 (SP3), you may receive the following error message:
An internal error occurred
After you click OK in the error message, you receive the following error message:
Service Pack 3 installation did not complete
Additionally, you may see the following errors that are logged in the C :\Windows\Svcpack.log file: 165.672: An internal error occurred.
165.672: Service Pack 3 installation did not complete.
165.672: Update.exe extended error code = 0x1ffe054f
165.672: Update.exe return code was masked to 0x643 for MSI custom action compliance

Note Throughout this article, the C :\Windows folder represents the folder where Windows XP is typically installed.
CAUSE
The errors that are mentioned in the "Symptoms" section can occur because of files that are not trusted or because of corrupted registry keys. You can verify the cause by searching for related entries in the Svcpack.log file. Specific entries will identify specific causes of the issue, as noted in the following "Cause" sections.
Cause 1
Determine whether the following entries are logged in the Svcpack.log file: 142.391: CheckVLKForBlock: LIC.dll not trust verified
142.578: Trying CheckVLKForBlock again
142.594: CheckVLKForBlock: LIC.dll not trust verified
142.594: Error: CheckVLKForBlock failed

These entries indicate that the cause of the issue is the Licdll.dll file. The Licdll.dll file may have been altered, is corrupted, or is not trusted. The Licdll.dll file is located in the following folder:
C :\Windows\System32\
Cause 2
Determine whether the following entries are logged in the Svcpack.log file: 211.890: IsSPBetaKey:pLA->lpVtbl->GetProductID Failed: 0x80004005
213.125: Trying CheckVLKForBlock again
214.468: Error: CheckVLKForBlock failed

These entries indicate that incorrect product ID information in the registry is causing the issue.
Cause 3
Determine whether the following entries are logged in the Svcpack.log file: 299.031: Trying CheckVLKForBlock again
299.531: Error: CheckVLKForBlock failed

These entries indicate that corrupted or altered registry keys in preinstalled programs are causing the issue. Note One program that is known to cause this issue is Micrografx - Picture Publisher Professional 10. To work around this issue, see the "Workaround for Cause 3" section.
RESOLUTION
To resolve or to work around these causes, use the resolution or the workaround that corresponds to the cause.
Resolution for Cause 1
To resolve this issue, you must replace the current copy of the Licdll.dll file by using a copy from the original Windows XP media. To do this, follow these steps: 1. Insert the Windows XP CD into the CD drive.
2. Click Exit on the Setup Wizard as soon as it starts.
3. Click Start , and then click Run .
4. Copy and then paste (or type) the following command in the Open box, and then press ENTER:
explorer
5. Click My Computer .
6. Note the drive letter that contains the Windows XP CD.
7. Click Start , and then click Run .
8. Copy and then paste (or type) the following command in the Open box, and then press ENTER:
cmd
9. Type or copy and paste the following text into the Command Prompt window, and then press ENTER:
Expand CD_Drive_Letter :\i386\licdll.dl_ C :\Windows\system32\Licdll.dll
Note In the command in step 9, replace CD_Drive_Letter by using the actual drive letter for the drive that you noted in step 6.
10. To install Windows XP SP3, visit the following Microsoft Windows Update Web site:
http://windowsupdate.microsoft.com Resolution for Cause 2
To resolve this issue, you must replace the incorrect product ID registry entry with the correct product ID. To do this, follow the steps in the "Locate and note the product ID" and "Identify and change the product ID registry entry" sections.
Locate and note the product ID
1. Click Start , and then click Run .
2. Copy and then paste (or type) the following command in the Open box, and then press ENTER:
sysdm.cpl
3. On the General tab locate the product ID. The product ID is the 20 digit number that is located under the Registered to section.
4. Note the product ID for use in the "Identify and change the product ID registry entry" section. Identify and change the product ID registry entry
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows
1. Click Start , and then click Run .
2. Copy and then paste (or type) the following command in the Open box, and then press ENTER:
regedit
3. Locate and then click the registry subkey that resembles the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\WPA\Key- XXXXXXXXXXXXXXXXXXXXX
Note The series of Xs represent a placeholder for a string of 21 characters.
4. There may be several subkeys that resemble the format in step 3. To determine the correct subkey, follow these steps: a. Click each subkey in the navigation pane.
b. In the details pane, compare the value of the string for the ProductID registry entry under the Data column to the number that you noted in step 4 in the "Locate and note the product ID" section.
c. The registry subkey whose ProductID registry entry value matches the number that you noted in the "Locate the product ID" section is the registry subkey that you want.

5. In the navigation pane, right-click the registry subkey that you identified in step 4c, and then click Export .
6. Save the registry subkey to the Desktop as temp.reg .
7. Right-click the temp.reg file on the Desktop, and then click Open With .
8. Click Notepad , and then click OK .
9. In the open temp.reg file, locate the following text:
[HKEY_LOCAL_MACHINE\SYSTEM\WPA\Key- XXXXXXXXXXXXXXXXXXXXX ]
10. Replace the text that is mentioned in step 9 by using the following text:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
11. Click File , click Save , and then exit Notepad.
12. Double-click the temp.reg file, click Yes in the dialog box when you are prompted to add the information to the registry, and then click OK .
13. To install Windows XP SP3, visit the following Microsoft Windows Update Web site:
http://windowsupdate.microsoft.com Resolution for Cause 3
To resolve this issue, you must delete the InprocServer32 registry subkey. To do this, follow these steps: 1. Click Start , and then click Run .
2. Copy and then paste (or type) the following command in the Open box, and then press ENTER:
regedit
3. Locate and then click the registry subkey that resembles the following registry subkey:
HKEY_CLASSES_ROOT\CLSID\{00020420-0000-0000-C000-000000000046}\InprocServer32
4. Click InprocServer32 . A string value with the name InprocServer32 is displayed in the details pane. Click this value.
5. On the Edit menu, click Delete , and then click Yes .
6. Exit Registry Editor.
7. To install Windows XP SP3, visit the following Microsoft Windows Update Web site:
http://windowsupdate.microsoft.com

on May 03, 2010 | PC Desktops

Tip

Disable the Disk Cleanup Warning



If your hard disk has what XP decides is too little space left on it, the operating system will pop up a warning and recommend that you run Disk Cleanup. But you may be like me and not want a virtual nanny nagging you to clean up your mess. You can turn off the warning with a Registry hack. Run the Registry Editor and go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer. Create a DWORD value called NoLowDiskSpaceChecks and give it a value of 1. Exit the Registry and reboot. You can also do this by using TweakUI
Change the Default Location for Installing Programs
XP uses the C:\Program Files directory as the default base directory into which new programs are installed. However, you can change the default installation drive and/or directory by using a Registry hack. Run the Registry Editor and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion. Look for the value named ProgramFilesDir. By default, the value will be C:\Program Files. Edit the value to any valid drive or folder; XP will use that new location as the default installation directory for new programs.

on Mar 17, 2008 | HP Pavilion a1410n (ER890AA) PC Desktop

1 Answer

AVG


Hi ,


This application has failed to start because the application configuration is incorrect.

Uninstall and Restart your computer.


Again download Avg and install.


I hope this wld work :).


Nov 12, 2008 | PC Desktops

1 Answer

Antivirus


Local machine: installation failed
Installation:
Error: Action failed for file avgmfx86.sys: starting service....
Error 0x80070002

Nov 08, 2008 | PC Desktops

3 Answers

Cant Local machine: installation failed Installation: Error: Action failed for file avgmfx86.sys: starting service.... Error 0x80070002 Rollback: Error: Action...


the same problem also weak up all the night with out any solutions problem is icab instal avg 7 but not 8 .
i regognized somethig when i instal avg antimalware if i chose to install spyware the shield will not work if idont chose spyware the shild will work propably !!!!!!

May 03, 2008 | PC Desktops

1 Answer

Nero express 6 error 6


Try to copy the setup file on the hard disk and then run the installer
You need to get rid of:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\App Paths\NCoverEd.exe
from registry. Nero is looking at it during the installation and for some reason f it is there (maybe the problem is with mismatched paths) then installation fails.
Do registry editing at your own risk..

Apr 30, 2008 | PC Desktops

1 Answer

When installing my avg 8.0, i get a error message action failed to registry value hklm/software/classes error ox8007005


check in ur pc and remove if any of ur component of that avg found, then try a differend one,
if u have any doubt,
mesege mi back...

Apr 18, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...