Question about Speed Queen AWN542 Washer

1 Answer

Washing machine goes thru the wash cycle then it stops, if I lift the door it starts again ,than stops. lift the door it starts than stops

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 415 Answers

It could be your out of balance switch is getting tripped before you try it again put in the spin cyc and see if it spins and drains the water if it does a odd sized load could be causing the failure.

Posted on Apr 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water goes in it washes for little while then buzzer starts before wash cycle ends


Hi Gina,
When your machine stops during the cycle does it beep & hold some of the wash progress lights on?
This is how it displays where the fault is coming from.
The motor controller is the most common for this type of fault.
Thanks
Damien

Nov 07, 2015 | Fisher and Paykel Washing Machines

1 Answer

Washing machine will not go thru full cycle. stops at part where wash water is drained, before spin and rinse cycle.


Check the lid switch. Open the door, It will be on your right, a lttle oval hole. I would start there.

Aug 22, 2010 | Whirlpool Washing Machines

1 Answer

How do i fix my washing machine interlock hotpoint hvf 344


The door should have a pin on it that pushes and closes the interlock switch. Check to see that the switch is inadjust ment to trip by turning off the water door open and with a plastic rod or a pencil push thru' the hole in the chasis where the door pin goes through and start the machine. If it starts quickly pull out the pencil, unplug the machine and adjust the switch. Plug it back in. It may continue on with the cycle you just started if not better! If not close the door aand start a short cold wash cycle. If it sounds like it wants to start, turn on the water and let it run thru' the complete cycle.

Jun 29, 2010 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Kenmore washing machine model 110 wash cycle stops


DOES IT DO THIS ON EVERY WASH OR SOMETIMES? IF SOMETIMES, CHECK LID SWITCH( THERE'S A LITTLE HOLE WHEN YOU OPEN THE LID, ON THE LID SHOULD HAVE A LITTLE PLASTIC PIECE THAT GOES IN THAT HOLE. THE SWITCH IS UNDER, INSIDE THAT HOLE. YOU CAN GET A PEN OR KEY TO SEE IF IT'S BROKEN.)
\
BOYNISMO@YAHOO.COM

Aug 21, 2009 | Kenmore Washing Machines

1 Answer

Maytag MAV6000AWW washer will not run thru cycles consistently


yes it would be the timer but they also stop if it gets off balance if its just off balance u should be able to lift the lid rearrange then start it again if that doesnt work it is the timer

May 21, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Washer fills up than starts draining while in wash cycle


Hello , here is the fix-your drain hose is placed to low in the drain line in the wall, it can not be placed in water or it will siphon the water out of your washer into the drain pipe and it wont stop until it hits air. try pulling your drain hose up and out of the drain and get a zip tie or cable and tie it to one of the water valves by the drain pipe placing the end of the drain hose about 5-6 inches inside the drain pipe. Let me know if you have any other questions and good luck it will work.

Phil

Jan 28, 2009 | Frigidaire FLEB8200DS Top Load Stacked...

1 Answer

Washer won't run through a complete cycle-stops at 29 minutes


There is a service manual behind the control panel it will show you how to test the door locks. If might have a bad lock solenoid.

Aug 01, 2008 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Speed Queen AWN542 Washer Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Speed Queen Washing Machines Experts

Terry Schneider

Level 2 Expert

177 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Speed Queen Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...