Question about Computers & Internet

1 Answer

The monitor wont come on at all wat could the problem be ita model L2046nv

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 27,725 Answers

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electic extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error
hope this helps

Posted on Apr 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to open a L2046NV


Jest push electric swche next push rimort buten

Apr 20, 2012 | Westinghouse L2046NV Monitor

1 Answer

Monitor turns then shuts off...will not stay on


sounds like your power board is going bad. you will probably need to replace it. also try unplugging it for about 20 minutes see if it turns on for longer if it doesnt then it is your power board. sorry for the bad news how that wont affect my rating

Mar 17, 2011 | Westinghouse L2046NV Monitor

1 Answer

How do you open a Westinghouse L2046NV monitor? I tried removed the two screws on the back and it still won't come apart? Please help!


Stand removed? Try lifting up the front bezel and then use thin screw driver to separate the front bezel from the back, but watch out for any attached to the front bezel. see exaples here:
http://s807.photobucket.com/albums/yy352/budm/Dell%202408WFP%20Rev%20A02/

Basic LCD monitor troubleshooting guide:

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

Failed TV, Monitors, Caps : http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague
Capacitor kits: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Oct 30, 2010 | Westinghouse L2046NV Monitor

1 Answer

Monitor will not turn on? westinghouse model L2046NV black screen will not turn on what should I do?


Do you see an orange light on the monitor anywhere? Usually the light turns green when the monitor comes on, but its orange when in "standby" mode. If your monitor is plugged in and you get an orange light, that usually means that your video card has gone out on your computer. When your video card goes out, the monitor doesn't receive a signal from your computer, so it doesn't know it is suppose to turn on. So if this is the case, you need to replace the video card on your computer


If your monitor doesn't turn on whatsoever, and everything is plugged in correctly, then you need to get a new monitor or send this one back to the manufacturer for a defective replacement.

Hope this helps! :)

May 03, 2010 | Westinghouse L2046NV Monitor

2 Answers

How do I reset my Westinghouse L2046NV monitor -- this monitor will turn on and light up and the picture will come on but then go off after 1 or 2 seconds -- any ideas ?


Hello, reseting your monitor will not solve the problem, what you need to do is replace the inverter board, if you would like to know price and availability for this model please send a request to parts@wde.com, they will let you know if they have the board, how mutch it is, and they will also troubleshoot with you over the phone at no charge to make sure that is what you need.

Dec 15, 2009 | Westinghouse L2046NV Monitor

2 Answers

I need a parts for a Westinghouse LCD Monitor. Model number is L2046NV


What parts do you need?
You can get service, parts and DIY info from LCD Parts - click on this link to their WEB site : -
www.lcdparts.net

Oct 21, 2009 | Westinghouse L2046NV Monitor

3 Answers

L2046nv works for a short time then turns off light then goes red


I have the exact same problem! So if anyone knows whats up it would be helpful :) what make and model is your screen btw?

Jan 03, 2009 | Westinghouse L2046NV Monitor

1 Answer

Sounds


If you have the L2046NV you won't get sound because if has no speakers.

Dec 09, 2007 | Westinghouse L2046NV Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...