Question about Technics SL-DZ1200 Turntable
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Have you tried swapping out the platters? Sometimes this will fix the problem. Also, although VERY RARE, make sure you were sold the right platters with your turntables. I doubt they found a pair of copy cat platters, but ya never know!
You can remove them by just lifting them up and off. There is a magnet that holds them down, so if you encounter resistance, just tap the center shaft with a wood block, mallet, or similar. Don't hit it too hard, you just want to disrupt the magnetic force, and/or loosen the platter from the shaft (which sometimes gets stuck).
Other than that, I've never heard of this type of issue, and I repair these things for a living.
- DJ PRO LAB
Posted on May 13, 2008
You will have to lift off the cloth on the platter section to expose two rather large holes in the plattr. Insert your thumb and forefinger, and pull up.
Posted on Jul 13, 2010
Hi, could just be platter not fitted hard down on spindle. I suggest you remove the platter and place it upon a dead flat surface to check to see that the platter is flat. If it is flat refit to turntable ensuring it is hard down on the spindle. If bent discard and replace with new platter.Platters can be ordered for all model 1200/1210 from email@example.com
Posted on Sep 13, 2010
Tips for a great answer:
Jan 20, 2015 | Technics SL-DZ1200 CD Player
Oct 07, 2014 | Technics SL-1210 Turntable
Mar 12, 2014 | Panasonic Technics SL-DZ1200 Digital...
Sep 22, 2009 | Technics SL-1210 Turntable
44 people viewed this question
Usually answered in minutes!