Question about Lasonic Ghetto Blaster i931 Boombox

1 Answer

My remote control isn't working - Lasonic Ghetto Blaster i931 Boombox

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 344 Answers

Take a digital camera like the one on your phone... point the 'business end' of the remote at the camera while you can view it in the screen and press a button on the remote.. the IR LED on the remote should be visible on the camera screen. If not, try replacing the battery. If that doesn't work either then it would seem the remote as come to an unfortunate demise. If you can see a blinking light from the remote then it would seem the issue is with the radio's receiver. Make sure the IR port on the radio is free of stickers or anything else that might block it. Also, be sure that you have LOS (line of sight) from the remote to the radio.
Other than that it would seem you need to take it to a repair expert locally.

Posted on Apr 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote isn't working for my Kohler C3-200


Sounds like bad remote that only works partially or some parts on toilet vent bad.

Apr 09, 2013 | Kohler C3-200 Elongated Toilet Seat

1 Answer

Remote isn't working


Are the batteries fresh and making contact at each end? Are the batteries free to move inside the case? If they are too tight they may not be making proper contact. I imagine they are inserted the correct way round!

Mar 14, 2013 | Televison & Video

1 Answer

My Sony RM V301 remote control code for my panasonic tv/vcr combo isn't working i've tried 018, 016, 017, 007, 049, 067 are there any others?


go www.fitness.manualsonline.com or www.remotecodelist.com

and follow the instruction manual procedure

1) tight the spring contacts with pliers
2) clean the batteries contacts
3) change new batteries
4) Resolder wires contact batteries and proof again. Otherwise you must go to repair shop

God bless you

May 10, 2012 | Sony (RM-V301) Remote Control

1 Answer

What remote can i use for my toshiba 20af44 TV


0159 0178 0109 0120 0181 0105 0049 0095 0170 0260 0358 0394 0924 0012 0095 0117 0141
These are the setup codes for Toshiba TV, with universal remote control. Just buy one universal remote control, which have these setup codes. Brand isn't a matter. You can get this detail, by the code list, the remote control will have.

Apr 29, 2012 | Toshiba 20AF44 20" TV

1 Answer

Need to get a unversal remote one for all to work


These are the setup codes for Symphonic with universal remote control.
0053 0189 0227 0456 0024
Buy one universal remote control, which has one among these setup codes. You can get details about codes, from the code list attached to the remote control. Brand isn't matter.

Apr 27, 2012 | Symphonic ST419E TV

1 Answer

Batteries are good. However TV isn't on right channel to show any programming what to do?


Hi William,
To confirm if the remote control is working fine, aim the infrared emitter of the remote control to your cellphone camera, press any button key and check if the infrared will flash to your camera. Watch this video on how to do this trick.
Also, does the front panel button key of the TV isn't working?
Jdvillanueva

Jul 09, 2011 | Toshiba CT-9995 Remote Control

1 Answer

Changed the batteries, but still does not work. no sensor no matter how many buttons I push. Does it need to be reprogrammed?


It could be on another frequency, if there is a switch near the battery for the channel, slide it over. If there isn't get it replaced or get a universal remote.

Jun 05, 2011 | Sony RMT-V501E Remote Control

Not finding what you are looking for?
Lasonic Ghetto Blaster i931 Boombox Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lasonic Audio Players & Recorders Experts

stynger007

Level 1 Expert

30 Answers

Joseph Hoffmann

Level 3 Expert

1746 Answers

The Knight
The Knight

Level 3 Expert

75452 Answers

Are you a Lasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...