Question about Kodak EasyShare C613 Digital Camera

1 Answer

KODAK my Kodak easyshare disk wont work after i downloaded it. i click it but it just blinks. it says it works for my computer and it doesn't and im panicking because THESE PICTURES NEED TO BE ON MY COMPUTER ASAP! i have a mac HELP and the version is C813 but that isnt on the list.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Kodak Master
  • 102,366 Answers

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.

Posted on Oct 11, 2012

6 Suggested Answers

sandipmistry
  • 56 Answers

SOURCE: lens problems

there is a problem wit your lens section, get it repaired with your company professionals. Your camera may be fallen or being pressed from front side by someone. The new ZOOM will give the same best result and no further problems.

Posted on Apr 24, 2009

  • 6 Answers

SOURCE: my kodak easyshare c813 doesn't

There is no speaker. It will play sound on your computer.

Posted on Jun 07, 2009

meeknotweak
  • 341 Answers

SOURCE: windows XP will not find my digital camera. it is

First download the necessary drivers for Windows, download here. After you've downloaded the drivers, press the red "Share" button on the camera, then plug it in.

Posted on Aug 29, 2009

meeknotweak
  • 341 Answers

SOURCE: Downloading from my kodak Easyshare C813

You need to download the camera drivers for your computer, download here. Also you'll need to know that before you plug your camera in ou need to push the red "Share" button.
Hope this helps!

Posted on Aug 29, 2009

  • 11967 Answers

SOURCE: It won't upload my pictures! Kodak Easyshare C813

Buy an inexpensive card reader to download your pictures to a folder you create on your desktop.

Posted on Oct 15, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to copy a photo from my Kodak EasyShare M550 . No matter what directions I follow, I cannot copy the few pictures I shot. What am I doing wrong? I tried following Kodak advice, but nothing...


Here's another possible option to copy your pictures over to your PC without using the software:

1.)Plug in your camera and turn it on.
2.)Wait a few moments then go to "My Computer"
3.)A new hard disk will show up. Double-click into it, and soon another folder, keep exploring and you should find your photos.
4.)Once you find them, create a folder (where ever you choose, the desktop will do just fine).
5.)Then select all the pictures, right-click on them, choose Copy.
6.)Go into the newly created folder and right click in it and choose Paste.
7.)Once all the pictures are successfully copied over you can delete the ones off your camera.

Hope this helps!
Remember to give me 4 Thumbs Up
for all the hard work to the Community! :D
~~Dayminner

Jun 04, 2011 | Kodak EasyShare M550 Digital Camera

1 Answer

My blue and black kodak easyshare wont read wheni plug it into my computer. i cant upload the pictures.


Do you have Kodak EasyShare software? If you dont, then download it from Kodak.com site. Select "support" and then click on "Kodak Easyshare Software - Windows Operating System". Download and install in your PC. Use this software to download your pictures to PC.

Jan 10, 2011 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

What "Printer" to choose?


Your pronter should have come with a driver disk. You should disconnect your printer from the computer and run the installation from the disk. When prompted, connect the printer to the computer to complete the installation.

May 17, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

The Installation disk does not work for Kodak EasyShaare 5500


The easiest thing to do is download the installation for the EasyShare 5500 from the kodak website.

Mar 18, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Can't get picture to scan


try doing this procedure to fix the issue.....


To perform a clean installation of the KODAK AiO Home Center software, follow the instructions below:

1. Disconnect all USB devices from the computer, including the Kodak EasyShare all-in-one printer.

2. Uninstall the KODAK All-in-One Printer Software:
    a. In the Control Panel, select Add or Remove Programs (WINDOWS XP Operating Systems) or Program and Features (WINDOWS VISTA Operating Systems).
    b. Select one of the following software programs from the list of currently installed programs, depending on which one appears in your list:
      • Kodak EasyShare software
      • KODAK All-in-One Printer Software
      • Kodak EasyShare 5000 series all-in-one software
    c. Click Change or Remove (WINDOWS XP OS) or Uninstall (WINDOWS VISTA OS).
    d. When the Install Wizard appears, click Next.
    e. Depending on the issue(s) you are experiencing, do the following:
      • If you are experiencing errors with KODAK EASYSHARE Software, such as a tri-code, in addition to errors with KODAK All-in-One Printer Home Center Software, select Remove, click Next, and follow the on-screen instructions for removing the software.
      • If you are not experiencing errors with KODAK EASYSHARE Software, select Modify to uninstall only KODAK All-in-One Printer Home Center Software, then click Next.
    f. In the Custom Setup window, select Remove from the drop-down menu for the Kodak All-in-One Printer, and click Next.
    g. In the Ready to remove the program window, click Next.
    h. In the Uninstall Complete window, click Continue.
    i. Restart the computer.
IMPORTANT:
    • If you selected Modify and only uninstalled the KODAK All-in-One Printer Software and did not uninstall the KODAK EASYSHARE Software, continue to Step 4.
    • If you selected Remove and uninstalled both the KODAK All-in-One Printer Software and KODAK EASYSHARE Software, continue with Step 3.

3. Run the Clear Utility to delete any previously installed KODAK All-in-One Printer Software components:
    1. Got to www.kodak.com/go/clear to download the Clear Utility for KODAK EASYSHARE Software.
    2. Select your operating system from the drop-down list and click the Download button to save the file to your desktop.
      Note: If the status indicator on the Clear Utility stops, check the taskbar on your computer for an active security program. If a security program appears in the taskbar, it may be prohibiting the Clear Utility from running. You must allow the Clear Utility to run on your computer before you can continue.

4. Delete the files and folders that can interfere with the installation.
    For WINDOWS XP OS, delete:
      • Printer folder in C:\Program Files\Kodak
      • Both the Eastman Kodak Company and KDS_Kodak folders in C:\Documents and Settings\All Users\Application Data
      • Kodak 5000 Series AiO folder in C:\Documents and Settings\All Users\Application Data\Kodak
      • Printer folder in C:\Documents and Settings\All Users\Application Data\Kodak\EasyShareSetup

    For WINDOWS VISTA OS, delete:
      • Printer folder in C:\Program Files\Kodak
      • Eastman Kodak Company folder in C:\ProgramData
      • Eastman Kodak Company folder(s) in C:\Users\your name\AppData\Local
5. Run Disk Cleanup:
    1. Open My Computer.
    2. Right-click Local Disk (C:) and select Properties.
    3. Click the Disk Cleanup button.
    4. When the Disk Cleanup for (C:) window appears, select the Temporary Internet Files, Recycle Bin, and Temporary Files check boxes.
    5. Click OK , then click Yes to delete all files and begin the Disk Cleanup.
    6. When the Disk Cleanup is finished, click OK in the Local Disk (C:) Properties window.

6. Shut down all background applications.
    1. Select Start > Run.
    2. Type msconfig in the Open field, and click OK.
    3. Select the Startup tab.
      IMPORTANT: If not all the applications in the Startup Items list are selected, write down which applications are selected so you know which ones to turn on again later.
    4. Click Disable All , then click OK .
    5. When prompted, restart the computer.

7. After the computer restarts, install the latest version of the KODAK All-in-One Printer Software as a free download from the Kodak Web site at www.kodak.com/go/downloads.
    • If the customer has the latest version of the KODAK All-in-One Printer Software on CD, install the software from the CD.

8. Before restarting the computer again, turn on the background applications.
    1. Select Start > Run.
    2. Type msconfig in the Open field and click OK.
    3. Select the Startup tab.
    4. Under Startup Items:
      - If only some items were originally selected, select the check box in front of the items that you noted in Step 5-c.
      - If all background items were originally selected, click Enable All, and click OK.

9. Restart the computer.

Nov 09, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Kodak aio printer 5300/software problem


Greetings Jackie,

Sounds like you have a failed .netframework installation. This is a Microsoft feature, but is delivered during installation of Kodak software as well. To fix this, do the following.

1. Open the Control Panel.
2. Double-click Add / Remove Programs (Windows XP only).
3. Select Microsoft .NET Framework 2.0.
    IMPORTANT: If other versions of Microsoft .NET Framework are listed, do not perform this operation on those other versions. Follow this procedure ONLY for Microsoft .NET Framework 2.0.
4. Click Change / Remove.
5. Select Repair, and click Next.
NOTE: A progress bar shows the repair progress.
6. After the repair is complete, make sure the Restart the computer check box is selected, and click Finish.
7. After the computer restarts, start the KODAK AiO Home Center software.
IMPORTANT: If the KODAK AiO Home Center software fails to start or continues to display an error message, completely uninstall Microsoft .NET Framework 2.0 and do a clean reinstall KODAK AiO Home Center software. The Microsoft .NET Framework 2.0 will also be reinstalled with the KODAK AiO Home Center software.
    1. Follow steps 1 - 4 above.

    2. Select Uninstall, and click Next.
      IMPORTANT: Uninstall ONLY Microsoft .NET Framework 2.0. If other versions of Microsoft .NET Framework are listed, do not uninstall them.
    3. Restart the computer.

    4. Perform a clean re-installation of the KODAK AiO Home Center software:
      a. Disconnect all USB devices from the computer, including the Kodak EasyShare all-in-one printer.
      NOTE: Do not disconnect your mouse or keyboard.
      b. Uninstall the Kodak EasyShare 5000 series all-in-one software:
        i. In the Control Panel, select Add or Remove Programs (Windows XP).
        ii. Select one of the following software programs from the list of currently installed programs, depending on which one appears in your list:
          • Kodak EasyShare software
          • Kodak all-in-one printer software
          • Kodak EasyShare 5000 series all-in-one software
        iii. Click Change or Remove (Windows XP).
        iv. When the Install Wizard appears, click Next.
        v. Depending on the issue(s) you are experiencing, do the following:
          • If you are experiencing errors with the Kodak EasyShare software, such as a Tricode, in addition to errors with the KODAK AiO Home Center software, select Remove, click Next, and follow the on-screen instructions for removing the software.
          • If you are not experiencing errors with Kodak EasyShare software, select Modify to uninstall only KODAK AiO Home Center software, and click Next.
        vi In the Custom Setup window, select Remove from the drop-down menu for the Kodak All-in-One Printer, and click Next.
        vii. In the Ready to remove the program window, click Next.
        viii. In the Uninstall Complete window, click Continue.
        ix. Restart the computer.
      c. Delete the files and folders that can interfere with the installation:
        • Printer folder in C:\Program Files\Kodak
        • Both the Eastman Kodak Company and KDS_Kodak folders in C:\Documents and Settings\All Users\Application Data
        • Kodak 5000 Series AiO folder in C:\Documents and Settings\All Users\Application Data\Kodak
        • Printer folder in C:\Documents and Settings\All Users\Application Data\Kodak\EasyShareSetup
      d. Run Disk Cleanup.
        i. Open My Computer.
        ii. Right-click Local Disk (C:) and select Properties.
        iii. Click the Disk Cleanup button.
        iv. When the Disk Cleanup for (C:) window appears, select the Temporary Internet Files, Recycle Bin, and Temporary Files check boxes.
        v. Click OK , then click Yes to delete all files and begin the Disk Cleanup.
        vi. When the Disk Cleanup is finished, click OK in the Local Disk (C:) Properties window.

      e. Shut down all background applications.
        i. Select Start > Run.
        ii. Type msconfig in the Open field, and click OK.
        iii. Select the Startup tab.
          IMPORTANT: If not all the applications in the Startup Items list are selected, write down which applications are selected so you know which ones to turn on again later.
        iv. Click Disable All , then click OK .
        v. When prompted, restart the computer.
      f. After the computer restarts, insert the KODAK EASYSHARE 5000 Series All-in-One Software CD into the computer CD drive to begin the installation.

      g. During the installation process, when prompted, select to search for an updated version of the software on the Kodak Web site and install the updated version.

      h. Before restarting the computer again, turn on the background applications.
        i. Select Start > Run.
        ii. Type msconfig in the Open field and click OK.
        iii. Select the Startup tab.
        iv. Under Startup Items:
          - If only some items were originally selected, select the check box in front of the items that you noted in Step e-iii.
          - If all background items were originally selected, click Enable All, and click OK.

      i. Restart the computer.
      Once restarted, you should be OK.If not call our 800 421 6699 and they will help further.
      Best Regards,
      Ron Baird - the friendly Kodak guy

Sep 18, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

Software Installation problem gets stuck - all in one Kodak ESP3 printer


I have a 6 year old Dell with XP, plenty of hard drive and memory. I could not scan using the software, I went on the Kodak website and followed the Step-by-Step Solutions and Repair which nothing worked, including the Kodak Clear Utility they reccomend for ridding your system of the software, it just locked up at the end.
So, I spent several hours on the phone with Technicians trying to uninstall and reinstall the ESP3 software. None of their methods worked even step by step manually un-installing every file and folder...
So I wrote a nasty email to them and they sent this back, which by the way, didn't work for me either, but maybe it can for you.

According to your email, the issue is that you have not been able to install the software for the printer on your computer. We understand the importance for you to have your printer working properly.

To help resolve this issue, please follow these steps in the order they appear:

1. Disconnect all USB devices from the computer, including the Kodak EasyShare all-in-one printer.

2. Uninstall the Kodak EasyShare 5000 series all-in-one software:
a. In the Control Panel, select Add or Remove Programs (Windows XP) or Program and Features (Windows Vista).
b. Select one of the following software programs from the list of currently installed programs, depending on which one appears in your list:
Kodak EasyShare software
Kodak all-in-one printer software
Kodak EasyShare 5000 series all-in-one software
c. Click Change or Remove (Windows XP) or Uninstall (Windows Vista).
d. When the Install Wizard appears, click Next.
e. Depending on the issue(s) you are experiencing, do the following:
If you are experiencing errors with the Kodak EasyShare software, such as a Tricode, in addition to errors with the KODAK AiO Home Center software, select Remove, click Next, and follow the on-screen instructions for removing the software.
If you are not experiencing errors with Kodak EasyShare software, select Modify to uninstall only KODAK AiO Home Center software, and click Next.
f. In the Custom Setup window, select Remove from the drop-down menu for the Kodak All-in-One Printer, and click Next.
g. In the Ready to remove the program window, click Next.
h. In the Uninstall Complete window, click Continue.
i. Restart the computer.

3. Delete the files and folders that can interfere with the installation.
For Windows XP, delete:
a. Printer folder in C:\Program Files\Kodak
b. Both the Eastman Kodak Company and KDS_Kodak folders in C:\Documents and Settings\All Users\Application Data
c. Kodak 5000 Series AiO folder in C:\Documents and Settings\All Users\Application Data\Kodak
d. Printer folder in C:\Documents and Settings\All Users\Application Data\Kodak\EasyShareSetup

For Windows Vista, delete:
a. Printer folder in C:\Program Files\Kodak
b. Eastman Kodak Company folder in C:\ProgramData
c. Eastman Kodak Company folder(s) in C:\Users\your name\AppData\Local

4. Run Disk Cleanup.
a. Open My Computer.
b. Right-click Local Disk (C:) and select Properties.
c. Click the Disk Cleanup button.
d. When the Disk Cleanup for (C:) window appears, select the Temporary Internet Files, Recycle Bin, and Temporary Files check boxes.
e. Click OK, and then click Yes to delete all files and begin the Disk Cleanup.
f. When the Disk Cleanup is finished, click OK in the Local Disk (C:) Properties window.

5. Shut down all background applications.
a. Select Start > Run.
b. Type msconfig in the Open field, and click OK.
c. Select the Startup tab.
IMPORTANT: If not all the applications in the Startup Items list are selected, write down which applications are selected so you know which ones to turn on again later.
d. Click Disable All , then click OK .
e. When prompted, restart the computer.

6. After the computer restarts, insert the KODAK EASYSHARE 5000 Series All-in-One Software CD into the computer CD drive to begin the installation.

a. Insert the printer software CD into the CD-ROM drive.
b. In the KODAK EASYSHARE 5000 Series All-in-One Software window, click Next.
c. Select CD Installation, and click Next.
d. Select I accept the terms of the License Agreement, and click Next.
e. Select Custom, and click Next.
f. Select Not Installed for every feature, and click Next.
g. When To begin the installation process appears, click Next.
h. Select Remind me later to register, and click Next.
i. When the Kodak Statistics Collection window appears, select Yes, and click Next.
j. When prompted, connect the printer to your computer.
k. Click Next when the Next button becomes active.
l. When Congratulations, your Kodak printer has been successfully setup appears, click Finish.
m. Click Continue, and then close all windows.

7. Before restarting the computer again, turn on the background applications.
a. Select Start > Run.
b. Type msconfig in the Open field and click OK.
c. Select the Startup tab.
d. Under Startup Items:
- If only some items were originally selected, select the check box in front of the items that you noted in Step 5-c.
- If all background items were originally selected, click Enable All, and click OK.

8. Restart the computer.

Aug 30, 2008 | Office Equipment & Supplies

1 Answer

I have a c613 easy share camera the software did work ,but quit working ,says i have to up grade catolg.i hit up grade ,says i have a problem,i complety erased,reloded it stil says the same and wont work


  1. Right-click the Kodak icon on the taskbar.
  2. Select Shut Down KODAK EASYSHARE Software.
  3. Double-click the My Computer icon.
  4. Select C: > Program Files > Kodak > KODAK EASYSHARE Software.
  5. Right-click the Catalog folder, select Rename, and change the folder name to CatalogOld.
  6. Start EASYSHARE Software.
  7. When you see the prompt to "Add images to collection," select the pictures you want to add.
  8. Restart your computer.
  9. If the error condition persists, visit the Downloads and Software Upgrades Web page at www.kodak.com/go/downloads and install the latest version of EASYSHARE Software.

Jun 08, 2008 | Computers & Internet

Not finding what you are looking for?
Kodak EasyShare C613 Digital Camera Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...