Question about Office Equipment & Supplies

1 Answer

I have my EPSON TX121 for almost 4 months and i installed it with CISS. I learn also to reset the waste inkpad counter and it work okay. My new problem is, the printer is starting again telling me a General Error message. I run the resetter and after that it tells me that the printer is ready to print. But whenever i'm going to print anything, i'm starting to hear that the printer is doing something but after awhile a general error message will appear again. Can somebody help me with this problem please?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 352 Answers

If you have a set of cartridges there try removing the CISS tanks and using them. If it recognizes the cartridges than the master chip on the CISS Tanks are faulty. Its usually the black.
Contact the manufacture for replacement chips if available.
I Hope this helps, if so please rate my response Thank you for supporting the FixYa Community
Regards GM

Posted on Apr 08, 2011

  • 1 more comment 
  • titanseux128 Apr 09, 2011

    it works..thank you very much and more power..

  • Grant Meier Apr 09, 2011

    Your very welcome!

  • Richard Cabanting Apr 25, 2011

    Try to remove the cartridge in back it again

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset epson xp-800 waste ink counter? where to download software for resetting? Thanks


12 head clean %100 waste pad warning.
6set 26xl : %100 waste pad warning.
30day ciss %100 waste pad warning.
wic key 30day 10usd x 1years 120usd key Money.
fu.... epson
please no key adj prg
http://printer.reseteasy.com/reset/46.html

Sep 17, 2013 | Office Equipment & Supplies

1 Answer

My epson rx650 ink pad replacement.


Epson have there reset's pretty locked up, Agents have to register to gain axcess rights to software program tool that resets purge counter (waste count rset) , there are 7 pads in these printers just felt blocks that suck up ink and the electronic counter. all colours are mixed in felt so no draining guess you could wash them out but it is the counter that will stop you, wont go till reset. I have seen some after market ink chip resets but dont know if they work.

Epson about 6 months ago sealed up their tec support download system, now we have to identify agent and rep who is downloading the "eagle" software that is the Epson adj software that allows adjustment and reset of waste ink counter.

reseter link and another http://www.printercartridges.com.au/

Dec 06, 2007 | Epson Stylus RX650 All-In-One Printer

1 Answer

How to reset 73/91 Cartridges for Epson CX5500


SSC utility is used for resetting waste ink counter, not for ink level counter (chip at ink tank). If you wish to reset ink level counter (chip), you must use hardware resetter, or use CISS chip with autoreset function.

Oct 18, 2009 | Epson Stylus CX6600 All-In-One InkJet...

3 Answers

Epson CX5500 with CISS ink supply not printing


Ive replaced all the cartridges on my epson 5500 but still nothing prints. Any help gratefully received

Jun 19, 2009 | Epson Stylus CX5400 All-In-One InkJet...

1 Answer

Why does everyone go quiet when I mention Epson r285 , 2 red flashing lights and service needed. Does no-one of you highly intelligent boffins know how to reset a simple printer. Ive asked and asked on...


Bit late in replying but this guide for dealing with the R285 has been up for a while now.

It tackles everything from installing a waste ink tank to resetting the waste ink counter.

Wrote the thing myself following quite a bit of interest... Hope it helps.

Apr 06, 2009 | Epson Stylus 2200 InkJet Photo Printer

2 Answers

2 red lights flashing service required


press maintence power and the small ink button all at the same time this will reset the printer

Apr 05, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Epson c70 problem


Re: Epson C70 Problem by Denny Conway (12/18/03 9:05 AM) reply + / - Aspah:A Service Error where all LED's/Lights are blinking at the same time,is normally a Maintenance Request Error, which is actually a Waste InkPad Overflow Error...JUST SO YOU WILL KNOW: On most Epson's, while theprinter is in this error condition, it disables all operations,including data communication. Normally your remedy is to replace theWaste Ink Pad/Pads with a new one/ones and then reset the InternalWaste Ink Pad Counter. If you just reset the counter and don't replacethe pads, then your printers old pads will eventually overflow andnormally start leaking ink out the bottom of your printer. You may wantto try doing a general search on the "fixyourownprinter.com" printerrepair site, under WASTE INK PADS or WASTE INK COUNTER RESET PROCEDURE.You should be able to find quite a few references listed in the lastsix months and most included web-site links, for possible help on thereset procedure. Some also list links where you can purchase a SERVICEMANUAL, in case you want to try and do the service yourself...GoodLuck! Denny Conway...P.S. THIS INFO POSTED BY "WES" MIGHT HELP: Wes12/07/2003 13:57:30 To see what's involved in servicing the waste inkpads try this http://www.epsonhelp.web1000.com/wip.html ...IF you just want to reset the wate ink counter you can use this program http://inkjetprinterhelp.us/epsonSSC.html.Resetting the ink counter will stop the lights from flashing butcleaning/replacing the ink pads is recommended. ...OR... Tim H12/10/2003 2:46:24 Subject: Epson Reset Program Download Location.after a long search for a reset program for waste ink, without paying,i found it. goto: http://inkjetprinterhelp.us/sscserve.exe ...please check that your printer is compatible goto: http://inkjetprinterhelp.us/epsonSSC.html ...p.s: this program has other features as well.


0.gif Re: Epson C70 Problem by Jim (12/21/03 4:10 PM) reply + / - I have just installed colour cartridges and a black cartridge into my C70.
Myproblem is that the black cartridge is not being recognised and I aminformed by the printer that there is insufficient ink in the cartridgeand a need a new replacement. The black cartridge that I have used is agenuine epson cartridge.
I have been informed by epson help linethat either I need to install a new new cartridge or that my printerneeds to go to Epson for a maintenance check.
I cannot afford another new ink cartridge nor can I afford the return charges and maintenance bill from epson.

Can you help?


0.gif Re: Epson C70 Problem by Wes t.gif (12/21/03 4:47 PM) reply + / - Theonly two option I can think of is to return the ink cartridge asdefective or you can trick the printer into accepting the cartridge.

Youwill need to download the SSC Service Utility and click on the "ResetCounters" tab and then click the "Reset Black" tab to reset the blackink cartridge. The only problem is you will need to reset or freeze theink cartridge.

You can get the SSC Service Utility here http://inkjetprinterhelp.us/epsonSSC.html

I hope this gets your printer going again.

Jan 02, 2009 | Epson Stylus C70 InkJet Printer

2 Answers

Epson Stylus CX5500 error message


actually i dont have one, sorry it took me awhile to reply check this website though and look for the utilty- printer reset utility- and check on the model number it supports:

http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

Thanks for using fixya!

Jun 22, 2008 | Epson Stylus 2200 InkJet Photo Printer

4 Answers

Waste ink pad counter reset software.


Dear Sir,
My Epson R30 Photo Printer has a problem from Waste Inkpad Full massage and it's not working. I want a free software to download to reset my printer and I tried in SSC Service Utility v4.30 but software don't have R390 model so, please help me to find right software to reset my printer. Thank you.
mallajanak@yahoo.com

Jun 14, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

853 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...