Question about Office Equipment & Supplies

1 Answer

My canon LBP5200 does all the usual whirring and stuff as if its about to print, when the paper feed normally starts instead the alarm light flashes and the following shows on screen :- Printer error. Try to turn the printer on again after turning off the power and waiting 3 seconds. If a service error is displayed even with the printer turned off and then on again, turn off the printer and contact the service representative where you purchased the printer. When contacting the service representative, inform them of the error code displayed and symptoms.Error Code : E000

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

The fuser unit is faulty.It sits at the back of the printer and disconnects by unlocking 2 blue levers.reseat it and try again,if not you need a new fuser

Posted on Jun 24, 2009

  • angelus316
    angelus316 Jun 24, 2009

    The fuser unit is faulty.It sits at the back of the printer and disconnects by unlocking 2 blue levers.reseat it and try again,if not you need a new fuser



2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 113 Answers

SOURCE: Fixing unit error. Turn off and

The problem is in your fixing unit
the reasons may be
(i)The thermistor has an open circuit or a short circuit.
(ii) he heater has an open circuit.The thermal fuse has blown.
(iii)The power supply PCB has a fault.
(iv)The engine controller PCB has a fault.

Check the following,
- Check the connector of the fixing film unit.If found no problems,
-Replace the fixing film unit.Not solved?
- Replace the power supply PCB.Still having problem?
- Replace the engine controller PCB.
and that's it

Posted on Apr 16, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Turn on machine & alarm immediately comes on. Flashing check printer 6000.

Are the cartridges in working order. I had similar problem with another make of printer when printer lights kept flashing and one of the cartridges was defective.

Feb 26, 2014 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

The machine won't print. It won't feed paper, The

Your machine needs to be serviced.
replace the cartridge with the original one.
it can not print if one cartridge is missing or not original.

Jul 12, 2011 | Canon Office Equipment & Supplies

1 Answer

Error message E 2 's flashing .. what should i do?

If the alarm light is solid amber E2 indicates a paper feed error.
This can usually be cleared easily.
If the Power light and Alarm light are flashing green and amber then the E2 indicates an error requiring Canon servicing might have incurred.. If after disconnection it reappears then it looks like a bin job as nobody on the internet appears to have any solution for this one and anything involving Canon would be as much as a new printer.

Jan 06, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

I have a lasser printer LBP5200, can I print on photografic paper? how mani gr.?

I am sure u can print on photo paper bu not to thick as this will damage the fuser and will be difficult to feed from the tray!About 180gr!Good Luck!

Apr 16, 2010 | Canon Office Equipment & Supplies

1 Answer

Canon PIXMA Pro 9500. When I try to print a photograph it prints the first 10mm and then ejects the paper, the fault light flashes twice. All the test functions such as the nozzle check, head alignment and...

The photo paper is a little stiffer than bond, you usually just need to clean the feed roller with a damp rag to restore grip. When it ejects like that it usually means the paper is getting in too late due to slippage of the feed roller.

Nov 09, 2009 | Canon PIXMA Pro 9500 InkJet Photo Printer

1 Answer

Both lights are blinking and will not print

they call that flash codes or error codes. please count
count how many times the lights flash, here is what they mean

Alarm / Power light flashes orange 7 times consecutively (ink cartridge installed incorrectly)

Alarm / Power light flashes orange 5 times consecutively (Print Head Error)

Alarm / Power light flashes orange 4 times consecutively (Out of Ink Error)

Alarm / Power light flashes orange 3 times consecutively (Paper Jam Error / Cover Error)

Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error)

Alarm / Power light flashes orange 16 times consecutively (This FINE Cartridge has previously been used)

Alarm / Power light flashes orange 15 times consecutively (FINE cartridge not recognized)

Sep 20, 2009 | Canon Pixma iP2600 Photo InkJet Printer

1 Answer

Alarm light blinking

Could be any number of things, carriage error, paper feed error, printhead gone out, even a logic pcb error, you need a shop to define the error, not enough to go on.

Jun 29, 2009 | Canon MultiPASS F50 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

77939 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides