Question about Cameras

1 Answer

Canon Si5 Lens Error message. Have tried suggestions on line

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 125 Answers

Welcome to FixYa.

There where wo reasons why do you receive a "lens error".

1. CF card slot cover or battery cover opened with camera on
2 . CF card slot cover or battery cover opened while camera was recording to CF card

In this case you have to ensure that CF card cover and battery cover is closed while camera is turn on.

You also need to be careful not to block the camera lens when turning on. Lens will have issues while retracting if your hands or even small thing that will block the lens to retrack while in motion of turning on.

Thank you for using FixYa.

Posted on Apr 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon 28-105 giving Error message 1 with my 7D... never happened before?


What is the error message? Usually, it is because the contacts have eroded away, or not the correct lens for the camera type. If it's 999 .. usually that is contact error.. cleaning can help.. both at camera and lens. If it's ERR, sometimes, it is the Card... which runs the entire camera. check to see if it's card and go on line to see if there is a new firmware update for you make and model.

Sep 05, 2013 | Canon EF-S 17-85MM F/4-5.6 IS USM Lens

1 Answer

'"The lens of my cannon


This is basically the infamous Canon "E18" error, which has been around for quite a while.
I would type out my own suggestions but since it's such a common error I'll just direct you to a nice long list of solutions already compiled elsewhere: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Mar 01, 2011 | Canon PowerShot SD1000 Digital Camera

1 Answer

Canon SD1000 lens error


Turn off the Camera, remove the Battery pack, then press and hold the power button for 30 seconds.

Reinsert the Battery, then buzz around the lens for a few times then check if it works. Make sure that the Battery is fully charged.

The error message indicates that the lens is not able to adjust itself.

Oct 23, 2009 | Canon Cameras

1 Answer

Canon PowerShot A420 reset lens error message


Not a solution, but a smilar problem with Canon Power shot A2000IS. Same lens error. reset camera message. Lens alos in fully open position.
Also in Costa Rica.
Any suggestions?
Neil

Jun 24, 2009 | Canon IXUS V2 Digital Camera

1 Answer

E 18 error


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

May 02, 2009 | Canon PowerShot S2 IS Digital Camera

3 Answers

Canon digital rebel xt :error 1 message


I agree with dovi. I actually emailed canon and here is what they said and how to do it; Thank you for your inquiry regarding your digital SLRs. We value you asa Canon customer and appreciate the opportunity to assist you, and I'm sorry to hear that you're running into the "error 1" message. From what you mentioned, it sounds like the lens might be having problems communicating with your cameras. One thing you could try is toclean the contact points on your lens and your camera. If you have not done this yet you can do so by turning the camera off, removing the lens, then brushing those copper points on both the lens and the camera body with something like a clean eraser. Should problems continue, I would suggest that you go to a local camera shop and try a different lens. That way you can determine whether the problem is due to the lens or to your cameras. I hope this is helpful Jason

Sep 04, 2007 | Canon Rebel XT / EOS 350D Digital Camera

2 Answers

Canon SD600 Lens error


Press the power button on and hold it down while extending and twisting the telescopic zoom lens. It might fix your problem. In any case it could not make it worse Good luck!

Aug 10, 2007 | Canon IXUS V2 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...