Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

1 Answer

Wtw6600sw whirlpool cabrio

I am getting the F1 alarm . How do I access control assembly. ksthan

Posted by on

  • dbrouss Aug 11, 2008

    Whirlpool has offered to pay for the part ,but it must be installed by a certified technician. Service call and labor will run you $150 . So if you buy the part and install it yourself its about the same. Anyway, whirlpool should be doing more since this is obviously a defect.

  • MyWasherSux May 11, 2010

    Same F1 deal here. I thought this interesting... The technician came out today and replaced the

    Control Unit Assembly (Part W10104830) with a "revised" Control Unit Assembly (Part W10201186 Rev A).

    It was the opinion of the technician that the original part contained a known defect (or defects); hence a new "revised" replacement part. Part cost 143.74.

    Whirlpool should PAY for this part!!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

First off I hope you have a Sears unit and second you did not pay a penny. Your F 1 error is a Primary control failure. Part W10104830 and one other do F1 and a oL code.
If you own a Sears machine you qualify for a recall under sf26-779B.
There is two parts to this call the board and a washplate
MCU part # W10201186
Washplate # W10077050
Recall will need your name and phone number and the machine model and serial number.

If you meet all of these conditions to the letter call Sears Recall at 1-800-659-7026

Posted on Sep 13, 2008

  • dankline789 Mar 31, 2011

    how can i contact "Sears Tech Too" ?

  • kay62561
    kay62561 Sep 11, 2012

    Thank you John!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's code F1?


It Means: Primary Control Failure F then 1 flashes when there is a primary control failure. Replace the machine control assembly.
See Accessing & Removing the Electronic Assemblies.

Jan 23, 2012 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

F1 is displayed on washer wtw6600sw-wht


Hello & Welcome to FixYa

F1 error in your whirlpool cabrio indicates bad control and should be replaced to resolve the error code. However, you can contact Whirlpool as well prior to replacing the control yourself as I have seen whirlpool paying for the parts themselves just because this is known to be a common issue. Please get back to me if you have any other questions.

Kevin

Oct 07, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

What is code F1 mean on the Whilrpool Cabrio. The washer stops about 5 seconds when I first put it on.


Ok the Cabrios have alot of problems. In your owners manual there is a big page where it gives you errors codes and what to do it also givees you a diagnostic feature which helps determine the problem. This site gives you the fault codes and what to replace. F1 means primary control failure. Also sometimes when the control board is bad something else could also be wrong. Good Luck

F1 (F60-68)
Primary Control Failure F then 1 flashes when there is a primary control failure. Replace the machine control assembly.
See Accessing & Removing the Electronic Assemblies. F1 (F60-68)
Primary Control Failure F then 1 flashes when there is a primary control failure. Replace the machine control assembly.
See Accessing & Removing the Electronic Assemblies.http://www.advantagesupplyfl.com/WhirlpoolCabrioWasherFaultCodes.html

Jun 02, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

I have a Whirlpool Cabrio top load washer. When I load the clothes and start the washer and it begins to run I hear an alarm, it stops and a F1 flashes on the display. What does this mean?


F1 (F60-68)
Primary Control Failure F then 1 flashes when there is a primary control failure. Replace the machine control assembly.
See Accessing & Removing the Electronic Assemblies.
F1 flashing on the display indicates a primary control failure.
"F then 1 flashes when there is a primary control failure. Replace the machine control assembly."

The link below lists Cabrio failre codes.
http://www.advantagesupplyfl.com/WhirlpoolCabrioWasherFaultCodes.html

Dec 16, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

2 Answers

Stopping after start with F1 error


Hi

Thanks for using FixYa. Error code F1 indicates primary control failure and to resolve this you'll have to replace the machine control assembly. Yes you are right, this error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part. Please rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Oct 11, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

What does the F1 means on a whroolpool cabrio loundry washing machine


Hi


Thanks for using FixYa. Error F1 indicates primary control failure and to resolve this you’ll have to replace the machine control assembly. This error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 10, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

I keep getting an F1 code when my washer starts the fill up


Hi


Thanks for using FixYa. Error F1 indicates primary control failure and to resolve this you’ll have to replace the machine control assembly. This error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 05, 2010 | Whirlpool WTW6400SW Cabrio Washer

1 Answer

Whirlpool Cabrio Washer : What is the F1 error code that I am getting occassionally mean?


Hi


Thanks for using FixYa. Error F1 means primary control failure and to resolve this you’ll have to replace the machine control assembly. This error should be fixed by whirlpool as its a common issue with whirlpool Cabrio washers, you can call 1-800-253-1301 whirlpool will send a tech. to fix it and pay for the part. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 09, 2010 | Whirlpool Washing Machines

1 Answer

What does f1 mean and can it be fixed?


F1 means Primary Control Failure.F then 1 flashes when there is a
primary control failure.Replace the machine control assembly and
see accessing and removing the Electronic Assemblies.

Apr 10, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

1,343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...