Question about Marshall Amplification Marshall AS100D 2x8 Acoustic Combo Amp

1 Answer

The treble on the equalizer doesn't seem to be working. The eq seems to have lost something. No depth to the sound. I've recently had it serviced but hasn't helped. Its lost its warm bright feel cheers

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same issue with my AS100D. When I first bought it the treble knob on the top channel was very responsive. At 10 is was unbearably "trebley". I was getting plenty of "high" treble set at 2:00, even 1:00. Then after about 6-7 mo, I started to feel it the brightness was leaving the amp. I was now putting my treble knob all the way to 10 and keeping it there, and it still wasn't enough. I had it serviced twice, no solution. Marshall got into the act and after months of going back and forth, they finally replaced the whole amp with a new one. I just got it. The treble was incredibly bright at 10, just like the former unit. But now after just a couple of days, I can already see the treble knob is not as responsive. I can't believe it! Now what?

Posted on Apr 15, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Most of my keyboard bass notes are not working. From treble G# and up the notes work; from treble G down it's sporatic

Sounds like a connection problem inside. Did you open the unit before and maybe not hookup the ribbon wires securely? Did you maybe spill something on the keys? You may have to open it up and do a visual check. Make sure you unplug it before you open it.

Mar 16, 2016 | Music

1 Answer

One channel doesnt work

it sounds to me that channel is burn

Sep 11, 2013 | DBX 231 Dual Channel 31-band Graphic EQ...

1 Answer

I have grover Roto-Grip Locking Rotomatics on my gibson les paul and for the top 3 strings it doesn't seem like the opening is large enough to feed the string through even when the thumb screw is...

They come as a set of 6, with three for the treble and 3 for the bass... MAKE sure you have the correct ones for the bass as they will have three with larger holes to accomodate the larger strings.

Jul 22, 2011 | Grover 502G Roto-Grip Locking Rotomatic...

1 Answer

How do i hook up my Ultragraph Pro 6200 equalizer to my Europower PMP5000?

You use special "insert cables" to insert the EQ into the path from teh mixer to the power amps. Thee cables have three 1/4 inch jacks and are a Wye type cable that connect the TIP of the TRS jack to the TIP of the plug to be plugged into the OUTPUT of the EQ channel. A second cable ties teh RING of the insdert jack into the TIP of a plug that lugs in the INPUT of the EQ. You need two of these special cables for stereo operation.

Apr 30, 2011 | Behringer Fbq6200 Ultragraph Pro Equalizer...

1 Answer

When i turn my 10 band eq I hear a radio station

As cool as that might be for some people I am sure you find it a nuisance.
Check for loose or disconnected ground wires all the way from the instrument to the pedal, and inside the pedal.
It may be a cold solder joint as well (disconnecting something from ground, and letting the radio station sneak onto the signal line)
The EQ and anything connected to it could be the problem, but start with the pedal itself and then the instrument and it's cable.

Mar 09, 2011 | MXR M108 10 Band Graphic Equalizer Pedal

1 Answer

The mixer has stopped working, seems to have lost power to the graphic equalizer all other lights work.

Here is a link to a schematic that should be close to yours. A lot of these just have more channels but circuitry is the same.

This is a zipped file. The schematic including their typical EQ is on the first file of the zip. The power supply is the last.

At the site, click on the brownish button with a down arrow to download. You will need to unzip the files or extract them using winzip or other decompressing SW.

Feb 16, 2011 | Behringer Xenyx 1832fx Mixer 18 Input 32...

1 Answer

I have a 92 Gibson T Bird with ebony fretboard, and a new one with rosewood fretboard. my old TBird doesn't have the brilliance in the highs as the new one does... i changed all the pots yesterday, with...

The most I can suggest for getting the shine back to the bass is to run an EQ before your preamp. Make sure all sliders are set to zero, then raise the higher frequencies until you get the sound you're looking for. This won't lose any growl, just accentuate the brilliance.

The best EQ to use would be a BOSS Bass Equalizer. You can use the same on your old T-Bird to accentuate the lower frequencies, and get almost the same sound.

Hope that helps!

Jan 09, 2011 | Gibson Thunderbird IV Electric Bass Guitar

1 Answer

Line 6 Spider III 15W- My Bass and Drive knobs arnt working... my mid and treble seems to be fine plus all my channels and effects but just those two knobs...and its buggin the **** out of me.... any...

resolder the three legs of the pots back down to the pcb. usually the treble feeds the bass, then from bass to mid then to ground. so if treble and mid are working its hard to imagine why the bass wouldnt be working. i would try to resolder, as you might have cold solder joints. keep it unplugged, pull off the knobs, open it up, remove the pcb screws and pull/flip out the pcb and resolder all of the pots.

May 25, 2010 | Line 6 Spider Iii 15 Modeling Guitar...

1 Answer

Fostex MR 8 HD\CD adding treble and bass?

It APPEARS that the MR8 does NOT include the ability to EQ. They have delay effects and the like built in, but no EQ.

To answer your question then, you would need to have an EXTERNAL EQ unit and loop the vocal through that unit to do EQ to do it right.

When mastering, the "powerful/natural/and bright would be filters that will emphasize the bass (powerful) or the treble (bright) but these are really not EQ's and you can ONLY choose one at a time.

Jan 13, 2010 | Fostex Mr 8hd CD 8 Track Recorder with CDr

Not finding what you are looking for?
Marshall Amplification Marshall AS100D 2x8 Acoustic Combo Amp Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marshall Amplification Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Are you a Marshall Amplification Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides