Question about Sharper Image Hybrid GP (SI724) Air Purifier

1 Answer

My Shaper Image GP Air Purifier has started making this strange clicking sound when it is on. I have taken off all the grids and cleaned them and put them back in place but the noise is still present. Any suggestions?

Posted by on

  • kerriskelton Apr 20, 2011

    Sorry, I have been out of town and just got back to try your solution. It is still making the noise but usually every few minutes now instead of every few seconds. Any other suggestions?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 635 Answers

After removing the grid see if your model has a louver which goes from side to side while blowing air. There is a plastic rod which moves like the old steam locomotive piston.This rods to an fro movement pushes the louver.The louver has a small notch which goes into this rod, that must have slipped off .If it slips off you will hear a clicking noise every 3 or 4 seconds depending how fast the rod moves.

Posted on Apr 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sharper Image Hybrid GP. Unit powers on, goes to


The solution drgoff provided ( the guy that used to work for Sharper Image ) actually did the trick !!!! Super excited to have this unit working again , thanks drgoff

Jul 07, 2009 | Sharper Image Hybrid GP (SI724) Air...

1 Answer

Ionic Breeze Hybrid GP air purifier only 1/2 grid gets dirty.


I have been doing research on this unit. I read that only every other grill is suppose to collect. The remaining grills increase the electrostatic charge making the collection plates, the ones that get dirty more effective. So the bottom line is there is nothing wrong with your unit.

Apr 24, 2009 | Sharper Image Hybrid GP (SI724) Air...

1 Answer

I cleaned my air cleaner and now it will not turn back on


When you cleaned your cleaner, you must be gentle with it. Wipe down with a lightly moist cloth or paper towel. make sure you dont shove any grime between the metal cleaning grid and the plastic holding it all together. that can cause lots of problems. Your air purifier probably wont start because of an auto shut off safety feature. Be sure that everything is in its proper place.... make sure hte front grill is fastened on correctly as well as the back grill. if those are not secured properly the unit will not start. also, check that your collection grid is placed all the way inside the unit and wait for the click noise that indicates that its locked in place. at that point the unit should turn on and you can once again enjoy fresh, pure air!

Dec 09, 2008 | Sharper Image Hybrid GP (SI724) Air...

4 Answers

My Sharper Image ionizer after I cleaned the grid now makes popping noises and then the red light that says drying grid comes on most of the time. Sometimes the light that says attention required comes...


You are probably aware that the ionizer uses a very high voltage (at very low current) to function. If you have used a cleaner of some kind on it, you could have made the grid sensitive to moisture.
I would remove the grid again and wash it thoroughly in distilled water to remove any residue that stayed behind, then dry it in warm air before reinstalling it. 

Oct 10, 2008 | Sharper Image Hybrid GP (SI724) Air...

2 Answers

SHAPER IMAGE OUT OF BUSINESS


Sharper Image has recalled all Ionic Breeze Ionizers. This is what put Sharper Image into chapter 11.

For information see the link

See the EPA link as well

Jul 12, 2008 | Sharper Image Ionic Breeze GP SI730 Air...

2 Answers

Air purifier can't work.


The best solution is to dump sharper image. I found a few site that had good solid reviews for a better air purifier decision - http://www.airpurifierhelp.com and http://www.air-purifiers-america.com

Alice

Jun 24, 2008 | Sharper Image Professional Plus Ionic...

1 Answer

Ionic breeze gp grid


This is where you go to get what you need......
Hope this helps....good luck and thanks for rating my effort....the Fang.

May 31, 2008 | Sharper Image Extra Grid for Ionic Breeze...

1 Answer

GP Professional Series


Make sure the grids are in correctly. It will not receive power is everything is not correctly in place.

Nov 25, 2007 | Sharper Image (SI871 GP) Air Purifier

Not finding what you are looking for?
Sharper Image Hybrid GP  (SI724) Air Purifier Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharper Image Air Purifiers Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Daniel Dollive
Daniel Dollive

Level 3 Expert

311 Answers

Mike Squire

Level 2 Expert

420 Answers

Are you a Sharper Image Air Purifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...