Question about Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Casio T2000 I have 125 PLUs to setup in a Casio T2000 register. . I'm trying to enter a description for a PLU. When i press any of the number keys the registor beeps while "E" is displayed on the register screen. I'm following the steps from the manual. Am i missing something? There is no number associated with the "E" that is displayed.

Posted by on

  • hemanu_2000 Aug 07, 2008

    Sorry about that. Its a PCR-T2000

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

Hi. I cannot find a T2000 listing. This is not a standard Casio model number. It might be a PCR-T2000, or maybe a QT-2000. Could you have another look at the model number and get back to me, then I can help you out?

Mark

Posted on Aug 06, 2008

  • flexion1
    flexion1 Aug 08, 2008

    Ok.
    Here's the procedure:

    Turn key to PGM mode.
    2
    SUBTOTAL
    Make sure the display shows "P2" or "PGM2"
    PLU number (e.g press 1 on the number pad for first PLU).
    Press PLU/S.DEPT button.
    Enter characters for name using the alpha codes under the department key labels.
    Press 00 button.
    Press CASH button (CA AMT).
    Press SUBTOTAL.

    Does this work?

    Mark





×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I WANT TO KNOW ABOUT MODEL NUMBER EF-E03SG-9AVDF OF CASIO watch .FULL DISCRIPTION.


This is the Casio Digital Cameras section, but I understand that you want to find a full description of a Casio watch.

If so, you can download a user manual here:-

http://world.casio.com/wat/download/en/manual/

Where it says:- "To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch." e.g.:-
chas6_10.jpg
Hope this gives you what you want!

Dec 26, 2010 | Casio Digital Cameras

1 Answer

Hi can you tell me how to get my camera to recognise my sd card on my casio exilim ex-z500. I have tried reformatting but this hasn't worked.


Is it a SD card, or a SDHC (High Capacity) card of more than 8GB? Because the EX-Z500 natively does not support Large-SDHC.

Power off the camera. Press and keep pressed the MENU key, and while doing this, turn on the camera via the ON button. Press the MENU key until the firmware revision is displayed. I suspect you will see V1.01 or V1.00.

And Large-SDHC support is only present in release V1.02 of the Z500 firmware.

You should have the firmware updater-checker software; if not, you can find it on Casio website:

http://support.casio.com/download.php?rgn=4&cid=001&pid=170

This should fix it up. Let me know if it works.

Jun 14, 2010 | Casio Exilim EX-Z500 Digital Camera

2 Answers

When i slide to take a pic it says that camara stabilizer is not available.


I have a Casio Exilim EX-V7 and I had the same Camera Stabilizer is not available problem, the firmware on my camera was 1.01 (hold down the menu key while sliding the cover open, keep holding until your firmware version displayed) From Casio.com, I downloaded the new firmware 1.03 (you need to register your serial number to do this (put in your serial number ONLY NUMBERS no letters from the bottom of the camera). Run the file you download to extract the bin file needed for the firmware. Connect the camera to your computer. When the folder opens put bin file into that location. MAKE SURE THE CAMERA BATTERY IS CHARGED. Hold down the shutter button (on top) at the same time press and hold the menu button then whil holding those two open the lens cover to power on the camera. It will prompt you on the screen to do the rest. It upgrades very quickly.
Mine still shows the Stabilizer error at startup however, it doesn't turn off and i can take pictures. Have fun and good luck.
Steve

Jul 02, 2009 | Casio Exilim EX-V7 Digital Camera

1 Answer

Need drivers for exlim ex-v7. I lost cd


try this link, you will need the serial number off the camera to register and download the drivers

http://support.casio.com/download.php?cid=001&pid=145&rgn=1

Mar 30, 2009 | Casio Exilim EX-V7 Digital Camera

1 Answer

Can't enter casio qt-2000 pgm mode


You can only enter PGM mode as manager.(our manager key is #1). The, you are brought to a admin menu.

Jan 01, 2009 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Camera Keeps Restarting


What we always did at tech support was had the customers take out their memory cards first. Power on the camera, press the menu button, go to setup, go down to reset, press right arrow and cofirm through there. Then press menu again, go to setup, go down to format, press right arrow and confirm again. You will have to enter your time and date HOPEFULLY one last time. Try it and if that doesn't work then it is an internal electrical error and needs to be sent in. :)

Mar 20, 2008 | Casio Exilim Zoom EX-Z700 Digital Camera

1 Answer

Casio camera


try resetting. press menu, go to setup, go up to reset, press right arrow, highlight reset and press set. If that doesn't work then its a repair. Send it into repairs and they will send you an estimate on what it would cost to fix it. Give them a call at 800-706-2534 option 2.

Nov 01, 2007 | Casio EXILIM ZOOM EX-Z60 Digital Camera

1 Answer

Casio Exlim--camera


Try resetting your camera. In your picture taking mode press MENU. Go to the SETUP tab and go up until you see RESET. Press your right arrow and make sure reset is highlighted and press set. If that doesn't work the Call the repairs center at 800-706-2534 and then keep choosing option 1.

Jul 02, 2007 | Casio EXILIM ZOOM EX-Z60 Digital Camera

1 Answer

Repair


Try resetting first before you send it in. In rec mode press menu go to setup tab go up to reset press right arrow highlight reset press set. More than likely you will have to send it in.

Apr 19, 2007 | Casio Exilim EX-Z30 Digital Camera

1 Answer

Casio EX-Z100


Try resetting ur camera. in record mode press menu. got to setup tab go up to reset press right arrow highlight reset press set If that doesn't work u will have to send it in to their repairs dept.

Sep 25, 2006 | Casio EXILIM ZOOM EX-Z850 Digital Camera

Not finding what you are looking for?
Canon Rebel XT / EOS 350D Digital Camera Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...