Question about Ricoh Aficio AP610N Laser Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Couple of things to try: - If you just emptied the waste cartridge then you have to take the bottle back out and clean the insides as well. The sensor sees the toner on the walls and still thinks it?s full. FYI as typical the manufacturer recommends replacing the bottle with a brand new one. - If not that then you may have toner covering the optical sensor. Try blowing the area where the waste bottle attaches to the printer with canned air. Let us know if you have any other questions and please don?t forget to rate this post.
Posted on Feb 17, 2007
multifunctional device - deactivation of the ink level counter
1. You can do it only when the printer counter releases the warning message - "the ink cartridge is nearly empty" = yellow warning mark
2. You have to do this procedure four times - for every cartridge one times
3. At the screen you will see three warning messages
- for the first one press "OK"
- for the second and third one press "Yes"
4. The fourth message tells you that you can do the ink level counter deactivation by pressing the "Stop/Reset" button (7) for more than 5 seconds. Do it.
Later you can see another type of warning message at the screen:
In this case you can not follow the previous procedure - there will not be any other warning messages.
Just follow the message on the screen and press the "OK" button (5) and you can print.
Unfortunately - I do not know for how long time it works.
You have to manualy check the ink level and refill (change) the cartridge before it is completely empty! You might brake your warranty!
When you insert the new original ink cartridge, the counter will work properly again.
Posted on Sep 14, 2008
I not know your printer but I can say this that after refilling it your chip will still thing it emty so some where on the printer Menu there is a way to reset the it back to 0 so it starts like new again.
Sorry cant be any more use to you than this, try looking up the net or the manual to how to reset.
All the best : Pineworks
Posted on May 10, 2010
Tips for a great answer:
May 13, 2016 | Konica Minolta Office Equipment & Supplies
May 04, 2016 | Konica Minolta Office Equipment & Supplies
Nov 18, 2015 | Ricoh Aficio Sp C222dn Color Laser Printer...
Dec 06, 2012 | Ricoh Aficio Sp 1000sf All-In-One Laser...
Jan 04, 2011 | Ricoh Aficio SP C410DN Laser Printer
Jun 16, 2010 | Ricoh Aficio GX3050 GelSprinter
Oct 13, 2009 | Ricoh SP C220N Aficio Laser Printer
Aug 08, 2009 | Xerox Phaser 3100MFP/S Laser Printer
Jul 03, 2009 | Ricoh Office Equipment & Supplies
Jan 03, 2009 | Ricoh Aficio SP C410DN Laser Printer
347 people viewed this question
Usually answered in minutes!