Question about Canon MultiPASS MP370 All-In-One InkJet Printer

Open Question

Canon MP 370 data error, unable to print and computer shown usb port unable to detect. Please advise

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: canon mp 150 error 5

Our pixma MP150 printer has a flashing E and flashing 5, also flashing on alarm, black ink and color ink. We have replaced the ink cartridges but nothing happens. They were empty. The printer doesnt recognize that the cartridges are there. We have tried unplugging the cords and taking the cartridges out and putting them in again. Also, it wont scan a thing either. ITs likes its frozen in the error. What can we do to fix this?

Posted on Aug 15, 2008

jonniewalker
  • 1029 Answers

SOURCE: Ckeck printer ##343

its a printer reset error press

*AF-Key = Additional Functions key = the black button with the star in a head above it.


1) Enter SERVICE MODE. (Press AF-Key, followed by "scan", "copy", "scan" -Keys)
2) Select TEST MODE (press right arrow button 13 times).
3) Hit -OK-
4) Select [8] PRINTER TEST
5) Hit -OK-
6) It'll now say "- 8-2 +" press the right arrow key once to get "- 8-3 +"
7) Hit -OK-
8) Select 0. [INK COUNT].
9) Hit -OK-
10) It should return to showing the "8: Printer Test - 8-3 +"
11) Press the [Stop/Reset]key - (black key with triangle and circle on it) - (returning to the state of 4), and then press the [ON/OFF] key.
Cleaning the print head:

At any time, DO NOT wipe the actual print head with your fingers. Use ONLY water.

-Remove print head assembly from printer.
-Remove ink tanks.
-Use running warm water, wash away the exess ink that is dried around the print head.
-Take one disposable mug, fill with hot water, drop the print head assembly in there, and let it soak for an hour, or so.
(-IF you have massaging shower head, with spray jet -function, use this to deep clean the actual print head.)
-Dry it up carefully, do not wipe actual print head, just tap gently with soft paper.
-Install ink tanks, install assembly to printer, let it settle for some time (5-30 minutes)
-Run Nozzle check, cleaning, print head alignment
hope this helps if you have further problem do let me know
pls appreciate by rating this solution

Posted on Sep 22, 2008

  • 1 Answer

SOURCE: canon ir 2016 cannot/wont connect to computer via usb

I have a machine it write DOWNLOAD STANDBY.Hw may i do it.

Posted on Apr 20, 2009

  • 1 Answer

SOURCE: Canon pixma mp 190 won't scan / copy and printing works!

I also have a newly purchased MP 190 that prints but will not scan at all have also tried reinstalling software.

anyone help me?? :(

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer offline which was working earlier


My computer detected printer offline. I have just used to print some documents. So, please advise what is the problem.

Mar 28, 2013 | Canon Black Pixma Mp 280 High Quality...

3 Answers

Offline printing from computer


disconnect printer from computer
cancel documents in queue
if using a straight USB connection, delete all instances of printer. else remove duplicate printer icons.
reboot & reconnect printer (swap cables if not detected)

Oct 20, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon Pixma MP280 reset


i did the steps to reset canon pixma mp 280 but did not work !!
so please tell me any way to reset it because i am so needy to print a lot of things , kindly be advise that the secreen shows e 0-8 , and the printer dosn't get to zero mode when i do the steps as shown in your directions on website

Jul 04, 2012 | Canon Office Equipment & Supplies

1 Answer

My printer Brother MF 5440-CN inject all in one is unBle print as it show unable init, machine error 4F.


Just checked a site - they suggest that you clear the purge counter, maybe this will help

Feb 29, 2012 | Office Equipment & Supplies

1 Answer

The printer is displaying error: B0605 on the screen


HI............
Issue Description: Print cannot boot up into ready state with an error message shown on printer control panel. The error messages include ERROR: B0601/ B0602/ B0603/ B0604/ B0605. Root Cause: Firmware crashes. Note: Inappropriate behavior may cause firmware crash. For example, a printer is turned off when critical firmware update is undergoing. Solution: Firmware Update Utility.
There are two use cases when encountering the issue: Instructions for Use case 1: driver is previously installed on PC
  1. Place printer in bootcode mode.
    1. Hold down the Cancel and OK buttons.
    2. Power on printer.
    3. Continue to hold down buttons until control panel dislpays Hewlett- Packard on the first line and Bootcode on the second line.
  2. c01688132.jpg Please observe the printer control panel and verify Downloading Update Data is displayed on control panel followed by Programming App Flash; please wait for upgrade utility to finish. Printer would be restarted automatically and the control panel display would show Ready .
Then the firmware is now successfully recovered. Instructions for use case 2: driver is NOT previously installed
    1. Insert printer installation CD.
    2. In Windows OS, please go to Start , Settings , Printers and Faxes .
    3. Click Add a printer to start Add Printer Wizard as shown blow and click on Next button. c01688133.jpg
    4. Check Local printer attached to this computer box; uncheck Automatically detect and Install my Plug and Play printer box and click on Next button. c01688134.jpg
    5. Select FILE:(Print to File) in the Use the following port: dropdown list and click on Next button. c01688135.jpg
    6. Click Have Disk... button. c01688136.jpg
    7. Browse to the CD drive in which the printer installation CD is inserted previously and click OK button. c01688137.jpg c01688138.jpg
    8. Highlight the HP LaserJet P2050 Series PCL 6 found in the printer installation CD and click on Next button. c01688138.jpg
    9. Specify the Printer name and click on Next button.
    10. Select No for Do you want to print a test page? and click on Next . c01688139.jpg
    11. Click the Finish button and allow driver to install as shown below. c01688140.jpg
    12. Verify printer is listed in Printer and Faxes window as shown below: c01688141.jpg
  1. Place P2055 in boot code mode:
    1. Hold down the Cancel and OK buttons.
    2. Power on printer.
    3. Continue to hold down buttons until control panel dislpays Hewlett-Packard on the first line and Bootcode on the second line Printer is now in bootcode mode.
  2. In the Printer and Faxes window, right click on the HP LaserJet P2050 Series PCL6 icon and select Properties .
  3. Click the Ports tab and view the USB ports as shown below.
    NOTE: If more than one (USB001) please take note of all listed ports, as other installed printers may have USB ports (USB002, USB003, etc). c01688142.jpg
  4. Close Properties window.
  5. Plug in USB cable from to PC
  6. The Found New Hardware Wizard will pop up, and tje printer USB enumeration will happen.
  7. Open printer properties and select Ports tab again.
  8. In ports tab, tick the correct port that the HP LaserJet P2050 series printer is enumerated on and click OK . c01688143.jpg
  9. Click Cancel on Found New Hardware wizard window.
    NOTE: Not the driver is installed and it is pointed to correct USB port.
  10. Run HP LJ P2055 Firmware Update Utility.

Sep 21, 2011 | Computers & Internet

3 Answers

My Canon printer PIXMA MP 800 cannot be3 installed with my windows xp. Help please


ARE YOU UNABLE TO INSTALL YOUR PRINTER AND OTHER DEVICE MOSTLY REASON ARE YOU HAVE NO SUITABLE DRIVER THE BEST STEP THE FIND DRIVER GO TO MY COMPUTER MANAGE, DEVICE MANAGER, PROPERTY ON DEVICE WHOSE DRIVER ARE NOT FOUND, COPY DEVICE ID CODE OPEN http://devid.info SITE AND SEARCH YOUR DRIVER AFTER SEARCHING EXTRACT YOUR DRIVER ON ANY LOCATION GO TO DEVICE MANAGER, UPDATE DRIVER SELECT PATH OF DRIVER INSTALL DRIVER TO USE THIS STEPS

May 18, 2011 | Cannon Office Equipment & Supplies

1 Answer

Computer not recognizing my camera when connected


Most of the issues can be solved by either reinstalling the software or by disconnecting and reconnecting the device.
In this case we can close in on three solutions
1) The USB drive in the system is not functioning. Try connecting any other USB devices to the same USB port and check whether it works or not. If the other device works well then it could be a problem with the data cable or with the port in the camera (usually firewire)

2) The data cable used to transfer data might have become faulty.Try using another data cable if possible and still the same issue continues then try connecting another camera to the system and if the other camera gets detected then the problem must be with the camera.

3) Try connecting the same camera to another system and see whether the camera gets detected. If no, then the port in the camera is defective.

After this we can close in on which could be faulty. data cable / Computer / Camera.

Feb 25, 2009 | Canon PowerShot SD1000 Digital Camera

1 Answer

Canon pixma mp160 printing problem


Here is the straight scoop for fixing your problem from the Canon website:
Issue: Unable to print from the computer when an error message is displayed

1. Configure printer driver to correct port 2. Disconnect and reconnect the USB cable to ensure a secure connection 3. Disconnect other device and reboot computer 4. Remove [Other device] from Device Manager

Hope this helps.

halthefotoguy

Jan 18, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

I want to know if I can print without USB using my wireless, I have a Canon pixma mp160.


Canon Pixma MP 160 do not support Wireless Interface
So you will need to connect it to USB port in order to print the documents

Interface
USB 2.0 Hi-Speed3
Direct Print Port

Specifications for Canon MP 160

You can refer the Canon MP 160 Manual for further inofrmation

I hope the above resolves your query
all the best

--------------------------------------
Do rate the Solution, as we can guide others accordingly
Thanks in advance

Jan 04, 2009 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Canon MultiPASS MP370 All-In-One InkJet Printer Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...