I bought a Dell PDA on Ebayx51v and it works just fine but with one problem. A few of the icons have lines through them (picture of icon is lost) Or some screens all have lines through them. Is there a fix for this/ Where
can I get a copy of the Dell Axim CD Rom disk that has the Self Diagnostic utility?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Since it gets to the 90% boot phase, you should be able to synce with the computer at that point. If so, then downgrade to pocket pc 2003 software which you can find at
Once done, make sure your pda will boot. If effective, re-install windows mobile 5.0 and try it again!
(Last attempt b4 contacting manufacturer...)
I had simmilar problem with this on my pda at one time too. Sometimes it is as easy as removing the battery, pressing and holding the power button for 10 seconds, then putting everything back in and reboot it.
First, restart your pda by using your stylus and pressing the pin-hole sized button on the back of the PDA.
There are sometimes a couple of different reasons why the pda wont recognize the network.
Main Reason: Make sure you are at the home screen...
Tap the wifi icon on the lower right corner of the pda. T
hen make sure that the WLAN power is turned ON.
Press the setting button.
If you see your network in the list, tap on it.
It should bring up a network configuration window.
Make sure it says it connect to "The Internet".
Then tap on the "Network Key" tab at the bottom of window.
If you have no security settings on your belkin router, make sure Authentication is set to Open and Data Encryption is set to "Disabled".
Then press "OK".
That should Be it!!!! Let me know if this way doesnt work, or if something doesnt make sence!
I have seen this before. It may or may not be the same problem but sometimes a crack can form in the digitizer (touch screen part of the display). The only way to fix it is to replace it. You can find them on-line or on ebay.