Question about Canon Pixma iP4500 InkJet Printer

2 Answers

The ink absorber is almost full contact the service center

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Canon iP4500

The ink absorber is full
Contact the service center

Posted on May 29, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

To clear the ink absorber is a daunting task and doing what they say may be a less painful solution. However you could try it yourself but you are looking at an aprox. 75% strip of your printer, the absorber sits at the bottom right had corner of the machine and it is a long drawn out procedure.
There are instructions for replacing and cleaning ink absorbers on You Tube and also instructions for resetting the printer. It is too involved and lengthy to try repeat here. Try looking at:-

http://www.youtube.com/watch?v=VVpjqBr7KjU

Posted on Apr 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"ink absorber is full contact


while the ink on the ink absorber is submitted and must be cleaned. disassemble the printer until the ink absorber is reached, remove the ink absorber, with an alcohol solution to clean the ink dissolve deposits. It is better to make this a specialist

Mar 31, 2011 | Computers & Internet

1 Answer

I have a canon iP1980.. it appears that ink absorber is full contact your service center..


I have a canon ip1980. It appears that ink absorber is full. Please contact service

Jan 11, 2011 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

What is e 27 and e 8??


Those two are error codes, and they mean the following:

E8 - The waste ink absorber is almost full. Press the OK button to clear the error.
Printing can be done until the waste ink absorber becomes full. If the waste ink absorber becomes full, please contact your local Service Center for replacement of the absorber and machine maintenance.
The waste ink absorber is a part inside the machine, which absorbs ink used in the cleaning operations, etc.

E27 - Manual does not specify what this means, but tells you what you should do: Turn the machine off, and remove the power plug from the outlet. About ten minutes later, plug it in again, and turn the machine on. If the problem is not resolved, the machine may require servicing. Please contact your local Service Center.
You can read more about the error codes on Canon website.

Dec 02, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

"ink absorber is almost full, contact service center" - what does this mean?


Inkjet printer has waste ink absorber inside, sponge alike. The function of waste ink absorber is to localize and keep waste ink safe inside the printer and does not harm the electrical parts.
Waste ink is produced from print head cleaning process and borderless printing. When capacity of the ink absorber raise to about 90% then warning message appears.
You need to bring your printer to the nearest service center to get waste ink absorber replaced.

Source:
Printer Clinic: Printer Tips,tricks,troubleshooting
E-manualshop: Online source of service manual

Aug 08, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

The waste ink absorber is full. It won't print


Contact service centre :)

or you can reset the waste ink tank and keep using the machine but it will damage ur printer and may gone permanently..

Mar 30, 2010 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Printer won't print. Says to contact service


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Dec 10, 2009 | Canon PIXMA iP1500 InkJet Photo Printer

1 Answer

Printer light is blinking in orange & green


bassically your printer has come to the end of its life, you can either buy a new printer or contact the service center...

Jul 13, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Its appear " The ink absorber is full. Contact the service center."


Inkjet printers have a fibrous pad inside them that collects the waste ink from cleaning the print head. Over time, this pad fills up with ink and can no longer hold any more. When this occurs, the printer indicates a "waste ink full" error.

Replacing the waste ink absorption pads is something an authorized canon service facility can take care of for you.

May 11, 2009 | Office Equipment & Supplies

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon Pixma iP4500 InkJet Printer Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1986 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...