Question about Fisher and Paykel Washing Machines

1 Answer

Fisher & Paykel top loader just beeps at the rinse cycle and won't keep going. We had a guy out to repair it. He waited until i wasn't watching, did something, then charged us a lot of money. Now it's happened again.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 155 Answers

You did not say if the machine was full of water if so your water pump is probably blocked or failed turn power of to machine lean it back so you can get to the water pump try to spin the pump by rotating the fan on the end of the pump if it releases put washer back in position turn on power advance washer to spin and see if it works let me know how you go

Posted on Apr 07, 2011

  • trademarktm May 31, 2011

    yes many water pumps are just blocked and cant spin beause someone either left coins or a chain in their clothes when they washed them. Just let the water out of the pump and clean inside sometimes there is hair pins in there once its clear the machine will work once again.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine stuck in drain mode, beeps, can only turn off at powerpoint.


Your motor controller board is faulty
needs repair or new/recondition board.

May 06, 2013 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

My top dishwasher drawer won't finish through the cycle. It runs fine on rinse only but not any of the wash cycles. It stops mid cycles, beeps like it has been paused, then tries to start again


Try to feel the temperature of water inside the dishwasher. If it is normal room temperature for the hot wash cycles then it is likely the heater is faulty.
It is not easy to replace unless you have good experience with repairing dishwashers.

Jan 17, 2013 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

My fisher & paykel washer will not move to rinse cycle


Fisher & Paykel GW712 AU 93200-A STOPS @ THE RINSE CYCLE & THE SPIN CYCLE?

Oct 12, 2011 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

Fisher Paykel washing machine Smartdrive 703 Advance, Power and Start buttons are non responsive when pushed. Is there a part that can fix this. Does the control panel have to be replaced?


Fisher & Paykel Smart Drive beeps and stops during rinse cycle. If I hit pause and wait and restart it eventually continues. It seems like it has problems detecting water level.

Apr 13, 2011 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher paykel washer won't go into rinse cycle. Stops and gives steady beeping tone


http://www.docstoc.com/docs/25379677/Fisher-and-Paykel-Circuit-Diagram-GWL11
www.fisherpaykelparts.net/partmanuals/GWL11US.pdf - United States Above is a circuit, and a service manual, below are two DIY Washer help sites, to help troubleshoot and repair, the service manual has all troubleshooting and repair instructions.
http://www.washerhelp.co.uk/diy-repair-help.html
http://www.repairclinic.com/Washing-Machine-Repair-Help

Jun 01, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

FISHER & PAYKEL TOP LOADER WILL NOT GO THROUGH ITS CYCLES AND WILL KEEP BEEPING WHAT IS WRONG?


I just had that problem. Do you have any water inside the washer? if you do drain it. Try running the diagnostic mode to drain the drain pump. then unplug the machine for 10 sec. then run the machine, that should take care of the problem. You'll find the service summary behind the control panel.

Feb 02, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher and Paykel washing machine will not stop washing. It does not advance between the cycles. It fills, then washes, then drains, and then starts all over again. It doesnt move beyond the wash cycle...


Fisher & Paykel GW608U Top loader washing mashine. On power up it will pass the self test, but then it goes to error (single beep every second and lights: green 3rd, 4th green and 7th orange from left are on). Could you advise on the problem please or supply error message codes table. Greatly appreciate your help and looking forward hearing from you

Jul 18, 2009 | Fisher Paykel EcoSmart GWL15

1 Answer

Fisher Paykel GWL11 Top Loader Washer


Please dont put any more money into this machine,if you wait long enough it will take alot more than a penny. 

May 11, 2008 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...