Question about Jackson 25 in. TempStar HH Free-standing Dishwasher

1 Answer

Jackson Tempstar dishwasher

We recently purchased a used Jackson Tempstar dishwasher and have been unable to put it into service, because there are no diagrams available of the drain assembly on this unit; it was missing these parts when we purchased it. This is all I lack to get this running. Help!

Posted by on

  • Anonymous Mar 13, 2014

    he is going through my friends list and causing problems for me I don't want him bothing me or I don't want wendy smith Jackson bothing me either please can you help stop them

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

You can download the manual you need by going to this link:
http://www.jacksonmsc.com/?xhtml=xhtml/jac/us/en/general/productdownloads_service.html&xsl=productdownloads.xsl
Hope this helps,
Kermit

Posted on Aug 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher keep tripping power from circuit panel?


Hi,
That could be either the motor or the heating element...
You will need to check it out with an Ohm meter to tell for sure what the exact cause is...

heatman101

Aug 18, 2010 | Jackson 25 in. TempStar HH/GPX...

1 Answer

Does this machine require a booster heater? If so,


Maybe and probably. Speak with your Jackson distributor about this. He probably has a solution for you that is compatable with your equipment.

Thanks for your interest in FixYa.com

Feb 20, 2010 | Jackson 25 in. TempStar HH Free-standing...

1 Answer

Tempstar Door model keeps overfilling


The sensor is a plastic pipe (vacume) / and a ajustable switch. The rise in water causes the air pressure in the pipe to increase and at the set level this stops the water inlet valve. You could disconnect the pipe and blow into it slowly and should hear the switch click. Most faults are the plastic sensor pipe blocked / obstructed and or the switch terminals (inside switch) burnt. This means that the switch must be replaced and should be set for the correct water inlet.

Jan 21, 2010 | Jackson 25 in. TempStar HH Free-standing...

1 Answer

My tempstar furnace will not light


look for the fot surface ignitor . it has probably failed and will require replacement. it will be located in or about the burners ( in center ) . or to left of center .. do not touch the ignitor when installing ..or bang it on anything . they break easy. mm

Dec 12, 2009 | Jackson 25 in. TempStar HH-ST...

1 Answer

What ton is my tempstar pgf048k080a a/c unit


Look for the BTU rating. 12,000 BTU is a one ton unit.

Sep 05, 2009 | Jackson 25 in. TempStar HH-ST...

3 Answers

Wrong voltage rating


Hello. If the unit is rated 460v, 3phase, the only way you can get it to meet your supply of 208v, 3phase, is:
a) have a transformer installed to make 460 from your supply by an electrician, or call your power company and see if 460 could be supplied to your building, but it would only be for that machine.
or
b) replace the heating elements for the 208v supply, have the pump motor checked to see if it will work on 208v, and a control transformer for the control circuit, as well as all the wiring related to the pump and heaters, as on 208v, they will draw more current than on 460.
so, can it be done? yes. Is the expense worth it? only you can answer that, However I would suggest that you resell that machine, and get the correct one from the start.

Hope that helps, and thank you.

Feb 16, 2009 | Jackson 25 in. TempStar HH Free-standing...

1 Answer

Jackson tempstar


ef24c2b.jpgWell, why didn't you say so... Please see attached pic. This is the latest version. The HH design differs only slightly from this. (from this pic, you can't see the difference) Let me know if you require further pics. The machine sits next to me most days...

Sep 01, 2008 | Jackson 25 in. TempStar HH Free-standing...

Not finding what you are looking for?
Jackson 25 in. TempStar HH Free-standing Dishwasher Logo

Related Topics:

620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jackson Dishwashers Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

jhnolson

Level 3 Expert

702 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Jackson Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...