Question about Kodak Office Equipment & Supplies

2 Answers

Got a new computer hooked up our kodak printer and it printed stuff with no problem. We since then had to reset computer to factory settings and now my printer isn't working and im not able to find the cd that came with the printer! How can i fix this

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Ok, you don't give your model number, but I have a quick solution for you.

Go to this Kodak support link. If it does not show up on this post as a link, copy it and paste it into the address bar of your browser and hit the enter key.

http://support.en.kodak.com/app/answers/list/c/890/selected/true#s=eyJzZiI6eyIxMDEyMjIiOnsiZmlsdGVycyI6eyJub190cnVuY2F0ZSI6MCwicGFnZSI6MSwic2VhcmNoVHlwZSI6eyJmaWx0ZXJzIjp7ImRhdGEiOjUsInJuU2VhcmNoVHlwZSI6InNlYXJjaFR5cGUifX0sImtleXdvcmQiOnsiZmlsdGVycyI6eyJkYXRhIjoiIiwicm5TZWFyY2hUeXBlIjoia2V5d29yZCJ9fSwicCI6eyJmaWx0ZXJzIjp7ImRhdGEiOnsiMCI6W119LCJyblNlYXJjaFR5cGUiOiJtZW51ZmlsdGVyIn19LCJjIjp7ImZpbHRlcnMiOnsiZGF0YSI6eyIwIjpbODkwLDg5Ml0sInJlY29uc3RydWN0RGF0YSI6W3sibGV2ZWwiOjEsImxhYmVsIjoiRG93bmxvYWRzIGFuZCBEcml2ZXJzIiwiaGllckxpc3QiOiI4OTAifSx7ImxldmVsIjoyLCJsYWJlbCI6IldpbmRvd3MgVmlzdGEiLCJoaWVyTGlzdCI6Ijg5MCw4OTIifV19LCJyblNlYXJjaFR5cGUiOiJtZW51ZmlsdGVyIn19fX19LCJjIjoyfQ..

I have attached a screen shot of the website this link takes you to. As in the screen shot, click on the left drop-down to get your product. It will take you to the type of printer and the model. Then click on the right drop-down arrow and select your operating system...such as Windows Vista, XP, or Windows 7. If you have another type of operating system, it will more than likely be there too. You will see a link to your type of printer for support and drivers. When you click on it, read the instructions. Scroll down and you will see the "Download" button to download your software. I would always chose the Full Version to get the most out of my printer, unless I only wanted quick basic printing capability.

Regardsgot a new computer hooked - armylifer.jpg

Posted on Apr 07, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,623 Answers

State what kodak printer you have and what windows version and then someone can tell you where to download the software you need

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hae come back from holiday to find my printer is'nt working. Its a Kodak ESP3200 Series and I have had about two years. The on/off switch is on all the time and the LCD screen is blank and nothing...


Hi,
Try to reset your printer to factory default settings. But before you do that, I'd like you to do this first.
  • Open the printer access door.
  • Remove and install the print head two times.
  • Close the printer access door.
  • Wait until the printer is ready to use.
if this won't work.
reset all defaults to the factory default settings:
1. Press Home. 2. Press "arrow down" to select Printer Settings. 3. Press "arrow down" to select Reset All Settings, then press OK. 4. When you see the message, "This will reset printer settings to factory defaults," press OK
Hope this helps.

Jun 17, 2011 | Kodak Office Equipment & Supplies

2 Answers

I keep getting a Printhead missing, not installed correctly or has come loose error. I have tried reinstalling the print head, several times and powering off several times but neither help. Any...


HTML clipboardHi
Here are a few possibilities...
1. Try cleaning the contacts on the print head and where they make contact inside the printer. (use cotton wool and Alchol) if that does not work...
2. Pull out power cable from printer wait 1 MINUTE then insert cable and switch back on again. (some printers reset to factory settings)
3. Remove printer cable from computer... Uninstall Printer driver from computer... Switch off both printer and computer. Wait 1 minute... Reconnect cables and switch on printer and computer... Allow computer to find printer... reinstall driver.


Good Luck!
Tinteiros Magic Inkjet Flush Kits (Ebay)

Sep 12, 2009 | Kodak ESP 5 Printer

2 Answers

Printer Error "Failed to detect paper edge,.


Try upgrading your Firmware go to to this web www.kodak.com/go/5300downloads and look for firmware and download it, make sure that the printer is connected and turn on while downloading the firmware. thanks

Aug 11, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

My 5300 all in one wont print from computer got new head new ink still the same


Try to install the latest version of Printer software from www.kodak.com/go/downloads on your computer. then open the kodak home center osftware and click on print pictures. Adjust the settings and you are ready to go. download the user manual from www.kodak.com/go/manuals.

Aug 03, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Faint printing


Try unplugging and repluging the printer to the computer.

Make sure the printer settings are correct in the printers properties box in windows (or other system)

Try another USB port and finally uninstall and reinstall the printer ,if it doesn't solve it then it will have to go to a Kodak service center.

May 06, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

New installation of kodakesp3 printer will not print


try device manader and go to the propertys and reset to factory settings.as origional
- this finely let me copy from my printer

Oct 19, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Plug and play


You would need a better understanding of what was slowing your machine down. Too bad you deleted the stuff outright rather than renaming it to some other directory.

Jul 26, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

Error code 5100


Here's what worked for me in solving this error code 5100 problem. Not only was I unable to print anything because I kept getting that code, but there was a thunking sound when the carriage stopped moving, and every time I turned the machine on it was feeding through one sheet of blank paper. I was about to go out and buy a new printer of a different brand because the Canon was unusable.
Then, fooling around with the machine's menu and settings buttons, I came across an option, I think it was in the Maintenance menu, to Restore Factory Settings. I chose that option and it asked me again if I wanted to restore the original factory settings, Yes or No. I said Yes, and immediately the printer started behaving itself. No more 5100, no more funny noises, no more blanks sheets of paper. It is back to its old self again.
That still doesn't solve the problem of spending a fortune to buy ink cartridges, but I just hooked up my old Panasonic 24-pin dot matrix printer to the printer port of my CPU (a ribbon lasts me a year and costs less than $15), and the Canon to another port, so now I can print the day-to-day stuff on the cheap dot matrix and use the Canon for the important stuff.
I don't know if restoring the factory settings will work for you, but it was the solution in my case. Hope it helps you out.

May 04, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5105 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...