Question about Bosch WTZ1280 NA Liquid Propane Conversion kit for Gas Dryers WTZ1280

1 Answer

I bought the PL conversion kit WTZ1280. Went to Lowes to buy the Torx bit and left the installation instructions in the shopping cart. Of course I went right back, but they were gone. Now I can't find the instructions anywhere. Even Bosch service did not help me. There are like 49 steps involved in the installation. Do you have this?

Posted by on

  • 4 more comments 
  • lin_clark1 Apr 06, 2011

    BSH is where I got it from, so I had already contacted them to no avail. I was just shopping at Lowes and left it in the cart. I would think surely someone out in the internet world would have the instructions. If Bosch ships them with the kit then they surely have to have them somewhere or whoever assembles the kit. If a qualified service technician has the instructions, why aren't they available to others?

  • lin_clark1 Apr 06, 2011

    I understand that........ Just so you understand, I ordered the part online from



    BSH Home Appliances
    5551 McFadden Ave.
    Huntington Beach, CA 92649



    Tel

    1-800-944-2904



    Fax

    714-901-5360


    The receptionist won't even try to help, she just immediately forwards me to the Bosch service center who say they don't have the manual and don't seem to want to open a box to copy it. I will have a qualified service tech do the work, but they may not have the instructions either. I would hate to have to order another one, copy the instructions and then return for a refund on the 2nd one.

  • lin_clark1 Apr 06, 2011

    I'll try that, thanks

  • lin_clark1 Apr 06, 2011

    On the phone now and he is calling the location that actually has the kits. Maybe......x my fingers.

  • lin_clark1 Apr 06, 2011

    Will do..........he got it and emailed it to me so now I can proceed to hv the valve installed.

  • lin_clark1 Apr 06, 2011

    Emissionwiz was very helpful and I was able to acquire the information I needed.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Bosch Master
  • 76,848 Answers

Hello
I just got off the phone with Bosch USA, there are no instructions available for this LP kit from them, they were kind enough to do quite an extensive search of the their data base of PDF files that would contain this install guide. So here are the choices you have here, go back to Lowes and try and find the instructions or have a qualified service person do the install,. If you wish to call Bosch yourself the number is 1800-944-2904. I will also add that i searched all the retailers I could find to see if they had the install guide available on line, no luck there either.

Posted on Apr 06, 2011

  • 5 more comments 
  • yadayada
    yadayada Apr 06, 2011

    This is the complete contact information for Bosch USA



    BSH Home Appliances
    5551 McFadden Ave.
    Huntington Beach, CA 92649



    Tel

    1-800-944-2904



    Fax

    714-901-5360

  • yadayada
    yadayada Apr 06, 2011

    In all the 1000's of questions I've answered on gas dryers yours was maybe the third one on LP conversion kit, and the very 1st one on this paticuliar model kit and dryer, so no it is not a common question, the reason? it is really not a job that should be done by the home owner and seldom is it appears, if you don't get everything sealed correctly you risk a gas explosion. I suggest you contact the store where you got it and see if they will photo copy it and send it to you. That is my best advice to get the job done in a reasonable amount of time. I am sorry I tried.

  • yadayada
    yadayada Apr 06, 2011

    Call Bosch, they can help if you just talk to the right person.

  • yadayada
    yadayada Apr 06, 2011

    Ask to speak to a service representive dealing with problems for installing this kit products. They were going to transfer me to one of these reps but i told them i would pass that on to you since i am not the installer.

  • yadayada
    yadayada Apr 06, 2011

    That is your best shot.

  • yadayada
    yadayada Apr 06, 2011

    Good luck then. I would really appreciate it if you rate me as "HELPFUL" for Fixya, I have really spent allot of time trying to help you through this, the "HELPFUL" is how I get credited for my efforts on your behalf.. Thanks

  • yadayada
    yadayada Apr 06, 2011

    Thanks.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I broke a shade on my harbor breeze lighthouse II ceiling fan, will you find the model number so I can order one?


Wrong way round, YOU tell us the model number and type and we tell you where to get the shade. You can see the fan in your house, but we can't. That makes it really difficult for us. Some shades are plain, some are fluted, some have patterns.

All is not lost though. Go here and take your pick. They all sell them including Harbour Breeze themselves..

  1. The Home Depot® - homedepot.ca‎

    Adwww.homedepot.ca/fans This ad is based on your:
    • current search terms
    • recent searches on Google
    Visit Google's Why This Ad page to learn more or opt out.
    Discover Canada's Online Source for Ceiling Fans & Lights. Shop Today!
.spell{font-size:18px}.spell_orig{font-size:15px}#mss p{margin:0;padding-top:5px}




Search Results

    Shop Ceiling Fan Parts & Accessories at Lowes.com

    www.lowes.com/Lighting-Ceiling-Fans/Ceiling-Fan-Parts.../_/N.../pl Harbor Breeze 2-Light Bronze Ceiling Fan Light Kit with Frosted ... Harbor Breeze Opal Round Frosted Glass ShadeHarbor Breeze Opal Round Frosted Glass ... Missing: lighthouse

    Shop Ceiling Fan Light Kits at Lowes.com

    www.lowes.com/...Ceiling-Fans/Ceiling-Fan.../Ceiling-Fan-Light.../pl Harbor Breeze 2-Light Bronze Ceiling Fan Light Kit with Frosted .... Harbor Breeze 4-Light Antique Brass Ceiling Fan Light Kit with Shade Not Included Glass or ... Missing: lighthouse

    Shop Ceiling Fan Globes & Shades at Lowes.com

    www.lowes.com/...Ceiling-Fans/Ceiling-Fan.../Ceiling-Fan-Globes-Shade... Shop a variety of quality Ceiling Fan Globes & Shades and Ceiling Fan Globes & Shades that are available for ... Sea Gull Lighting (2) ... Harbor Breeze Opal Round Frosted Glass ShadeHarbor Breeze Opal Round Frosted Glass Shade. Missing: lighthouse

    Amazon.com: Harbor Breeze - Ceiling Fan Light Kits ...

    www.amazon.com > ... > Ceiling Fan Light Kits Lighting & Ceiling Fans All Home Improvement Best Sellers Lamps & Shades Ceiling Lights ... Harbor Breeze Springfield II 52-in Antique Bronze Downrod or Flush Mount Ceiling ... Harbor Breeze 52-in Springfield Brushed Nickel Ceiling Fan with Light Kit ... Harbor Breeze Outdoor/indoor Lighthouse Kit Weathered Copper.

    harbor breeze light kit parts - Harbor Breeze Shop

    harborbreezeshop.com/tag/harbor-breeze-light-kit-parts/ Jul 25, 2012 - You can also have the option of choosing different lamp shades, or if in case ... The 52? Harbor Breeze Avian ceiling fan with a built-in light kit from .... has a style inspired by the clean, strong lines of a welcoming lighthouse.

Feb 01, 2016 | Dryers

2 Answers

Club car brake light not working


2008 precedenmt golf cart dash light keep coming off an on

Mar 02, 2013 | Power Equipment Solutions 2002 Club Car DS...

1 Answer

We would like to buy a propane conversion kit for our Credo cooktop. Do you know where we can get one?


conversion kits can be bought at your local gas appliance shop -- look in your local phonebook to find the closest one.
and when you go down there to get the kit -- make sure you write down the make and model numbers of your stove and the sizes of all the connections that you are trying to connect to.

c...

Feb 05, 2011 | Kitchen Ranges

1 Answer

Tool needed to remove SRS Control Module fro 1997 Honda Accord


Hi, the bit is called a Torx Bit or a star bit. Don't get the type for a screwdriver, get the socket that would go on a ratchet, you'll need to put an extension on it of course to get in there. Push hard or it will strip. Give Honda a call and ask them what size it is for your car for sure, might be a 6mm or you can just buy a metric Torx Bit Set. Separately they are $3.99 at Autozone. Not sure how much the kit is. Good luck.

Oct 02, 2009 | 1996 Honda Accord

5 Answers

Conversion kit or fix for LP to NG for the Char-Griller


I removed the jets and drilled them out, #54 is what I started with and then moved up from there to get a good flame( gas pressure may be diffrent in your area). I went to lowes and purchased the universal gas line for grills. Item #: 206469 from lowes, I removed the hoses from the valves, and proceeded to remove the regulator from the hose. After that, i used a 1/4" npt coupling, and a 1/4/" NPT to 3/8" Flare fitting( fits to hose). I drilled a hole in the brace that is under the clamshell(it says UP) that way I had a place to relive stress from the hoses. I threaded the Coupler to the Y then threaded the Flare fitting thru the sheet metal and then the coupling. This was an easy mod minus the garage in disarray, my precision calipers on loan, and 3 trips to the hardware store. The connection that goes to the house is a 3/8" NPT Female, my house has 1/2" pipe, The one wasted trip to the store is because i didnt bring the fitting with me to the store and assumed the size was 1/2 to 3/4(Rookie Mistake). 46e03a6.jpg846ce6e.jpgb1bb7d1.jpg

It was 35 degrees when I finished this mod, and on high for all 3 burners, I got it to 675F in a hurry. the needle was still creepin up, but that is when I said that was good enough for me.
I used my lathe to drill out the jets, ksware is correct with how easy the jets break. I broke the one in the side burner. I will make another one when I get an hour or two. Good luck to you and happy grilling.
Little Elm, Tx.

Sep 20, 2009 | Grilling

3 Answers

Where can you get a screwdriver for the star screws? (HomeDepot?) Thanks


Yes. These are now common drivers. All hardware stores, home depot, lowes have them. They do come in sizes so you may want to get a set or take a very good look at the screws you need to work on so you get the correct size.

May 03, 2009 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

Refilling my colour ink


I can understand your fustration, Filling cart. is a mess and you have to drill a small hole if there is not service hole in the cart. Then you got to charge the ink in the printer itself. The kit you bought should have some type of instructions on it. Like I said you need to find a service hole if not you need to drill one with the smallest bit. Other then this there is not too many more instructions one can give you since we cannoot see the cart. or the kit you bought.

Apr 30, 2009 | Lexmark X2650 All-In-One InkJet Printer

1 Answer

Converting Natural Gas to Propane


Did one not come with the unit itself? It would be taped to the top. If not then go here.
Here is instructions on how to do it.
http://www.appliance411.com/faq/gasrange.shtml
you can buy the part at your local ACE, Home Depot, Lowes

Feb 07, 2009 | Dynasty DSCT 36-6 Gas Cooktop

6 Answers

Whirlpool water heater, thermocouple went bad. Gas control valve is left hand thread, while new thermocouple is right hand thread


with a fine tooth hacksaw cut a slot in the old nut so it can be removed from the old 1/8 inch cu tubing. Now place the old nut around the new tubing and thread it into the gas valve

Nov 29, 2008 | Heating & Cooling

5 Answers

Propane adaptor kit for a Samsung dryer


MAL9000AXX is a part that can be ordered there are a couple companies that stock it , Marcone Appliance parts, Reliable Parts, and Appliance parts depot too name a few it retails for about $22.00 try calling a local parts distributor if these names don't sound familiar, Maytag was making dryers for Samsung for quite awhile and that is the most common conversion kit, so I think you'll be fine if you get that kit, good luck.

Jul 30, 2008 | Dryers

Not finding what you are looking for?
Bosch WTZ1280 NA Liquid Propane Conversion kit for Gas Dryers WTZ1280 Logo

Related Topics:

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...