Question about Cell Phones

1 Answer

OLD model FM 2575. MANUAL IN HAND, cannot do final step After power outage

Posted by on

  • mmczara Apr 07, 2011

    Got the greeting in and hear it, but the issue is cannot get the caller ID, etc up in the



    play Skip memo. On set up, began by picking the language, English, went on to the time

    date, etc. but when I call phone from cell, not caller ID Shows in the memo.


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello.

The final step is recording a new greeting. Is that where you are experiencing a problem ? You were trying to reset the phone and were unable to record a new greeting (page 15 - 16).

If so, what happens when you try to record a new greeting by pressing and holding the Greeting button ?

Hope this helps.

Posted on Apr 07, 2011

  • NinaE Apr 07, 2011

    Sounds like you did everything correctly. I would suggested disconnecting your power and other cables and try the procedure again.

    If still a problem, contact your telephone company, since they support Caller ID.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Marantz st-48 wont pick up fm signal


If you are inclined to try to service this unit the first step is to download a service manual, this is a sight that has a copy of the manual for download for a price

http://www.marantz.owner-manuals.com/ST48-service-manual-MARANTZ.html

you will require some hand tools, soldering iron and desoldering brade and some solder, multi meter and some type of signal tracing device like and oscilloscope or and audio tracing amplifier.
Look for missing power supply's to your RF front-end circuits and FM discriminator , also track down the analog switching ic to varrifie that this unit is functioning and selecting the FM circuits
if you still kneed help contact me further with your findings and a copy of the service guide

Have a good day and good luck
Best regards Falco

Nov 04, 2013 | Marantz SR-48 Mark II Receiver

1 Answer

I NEED A MANUAL FOR A MODEL#2575


Here is the manual that you requested for the bell south fm2575.

thanks and good luck

May 03, 2011 | Northwestern Bell Southwestern Bell FM...

1 Answer

How to get free download for a hp 2575 photosmart manual frank


Hello there
Here is some information below that will help you get the manual ok?
I hope that this is very helpful
best regards michael
HP Photosmart 2575 Manuals, Support and Troubleshooting ... Free download of HP Photosmart 2575 User Manual. Troubleshooting help from
experts and users. Ask our large community for support. http://www.retrevo.com/support/HP-2575-Multifunction-Printer... - 107k - Similar pages HP Photosmart 2575 review - Multifunction Printers Quick links to useful Expert Reviews for HP Photosmart 2575 describing pros and
cons. User sentiment in Forums. Download to User Guide and Manual. http://www.retrevo.com/s/HP-2575-Multifunction-Printers-revi... - 85k - Similar pages

Nov 16, 2009 | HP Photosmart 2575 All-In-One InkJet...

2 Answers

How to adjust frequency on transmit??? Galaxy


hELLO THERE
hERE IS SOME MODIFICATIONS FOR THIS RADIO
Galaxy Mods DX 2527 - VR 1....AM/FM S-Meter, VR 2....SSB S-Meter, VR 3....SSB Squelch Range, VR 4....AM/FM Squelch Range, VR 7....SSB Carrier Balance, VR 8....RF Meter, VR11...Driver Bias, VR12...SSB ALC, VR13...Hi Power, VR14...AMC, VR15...AM Low Power, VR16...SSB Low Power, VC 1....10.240, VC 2....10.240. DX 2517- VR 1....AM/FM S-Meter, VR 2....SSB S-Meter, VR 3....SSB Squelch Range, VR 4....AM/FM Squelch Range, VR 5....FM Deviation, VR 6....SSB Carrier Balance, VR 7....TX Offset, VR 8....CW Beep Level, VR 9....RF Meter, VR10...Final Bias, VR11...Final Bias, VR12...Driver Bias, VR13...SSB ALC, VR14...AM/FM High Power, VR15...AM Modulation Meter, VR16...AM Modulation, VR17...SSB Power, VR18...AM/FM Low Power, VR601..13.8 Volt Power Supply. DX 22B- VR 1....AM/FM S-Meter, VR 2....SSB S-Meter, VR 3....SSB Squelch Range, VR 4....AM/FM Squelch Range, VR 7....SSB Carrier Balance, VR 8....RF Meter, VR11...Driver Bias, VR12...SSB ALC, VR13...High Power, VR14...AMC, VR15...AM Low Power, VR16...SSB Low Power, VR21...TX Offset, VC 1....10.240, VC 2....10.240. DX 11B- VR 1....AM/FM S-Meter, VR 2....SSB/CW S-Meter, VR 3....SSB Squelch Range, VR 4....AM/FM Squelch Range, VR 5.....FM Deviation, VR 7....SSB Carrier Balance, VR 8....RF Meter, VR10...Final Bias, VR11...Driver Bias, VR12...SSB ALC, VR13...AM/FM High Power, VR14...AM Modulation, VR16...CW Tone Level, VR20...Final Bias, VR21...TX Offset, VR601..13.8 Volt Power Supply, VR803..AM/FM Low Power. DX 77HML, DX 88HL, and DX 99V- VR 1....AM/FM S-Meter, VR 2....SSB S-Meter, VR 3....SSB Squelch Range, VR 4....AM/FM Squelch Range, VR 5.....FM Deviation, VR 7....SSB Carrier Balance, VR 8....RF Meter, VR10...Final Bias, VR11...Driver Bias, VR12...SSB ALC, VR13...AM/FM High Power, VR14...AM Modulation, VR16...AM/FM Low Power, VR20...Final Bias, VR21...TX Offset.
Unmarked VR in R189..AM/FM Medium Power for DX 77HML only. DX 33HML, DX 44V, DX 55V, DX 66V, and DX 73V- VR 1....AM/FM S-Meter, VR 4....AM/FM Squelch Range, VR 5.....FM Deviation, VR 8....RF Meter, VR12...Low Power AM Modulation, VR13...AM/FM High Power, VR14...High Power AM Modulation, VR16...AM/FM Low Power.
Unmarked VR in R188..AM/FM Medium Power (DX 33HML only)
Unmarked VR in C139..Med Power AM modulation (DX 33HML only) DX 949,DX 959- VR 1....AM S-Meter, VR 2....SSB S-Meter, VR 3....SSB Squelch Range, VR 4....AM Squelch Range, VR 6.....SSB Carrier Balance, VR 7....TX Offset, VR 9....RF Meter, VR10...Final Bias, VR12...Driver Bias, VR13...SSB ALC, VR14...AM High Power, VR15...AM Modulation Meter, VR16...AM Modulation, VR17...SSB Power, VR18...AM Low Power, VC1....10.240. DX 2517 and DX 2527-
Symptom:Buzzing or motorboating sound in either the transmit or receive.
Problem: TR602 is oscillating
Cure: Replace C602 with a .01uF cap {Cap is located in the power supply board}.
RG 66,99,DX2517 Replace Q54 2SB754 60watt 7A with a higher power 2SB817 100 Watt 12A. Derating of this component will cool operation, provide better voltage stability,decrease wobble, allow voltage increase to 14.5 volts comfortably. (replace 10 volt caps in this section of the radio to a minimum of 16 volts before increasing supply voltage to this level)and provide faster swing rise time, Replace Q37 2SA473 to a 2SA1012-0 or ECG153 this will improve the clarity and volume of the modulation and it will also run a lot cooler.

Nov 12, 2009 | Galaxy Radios DX-949 40-Channels Base CB...

1 Answer

Power outage caused c8 / 76 error - No Hot Water


How old is your unit...if less than 5 years old tell Polam/Rheem customer support you are recieving a code 76 error - this is a loss of communication between the remote and the burner control assembly. Part will be covered under MF defect warranty. However, the part is covered....the labor to install is not.
If you are slightly technical you can install the part yourself...customer support will walk you through the process and they give you a step-by-step procedure to follow.

Sep 24, 2009 | Rheem Paloma PTG-74PVN / RTG-74PVN...

1 Answer

Black stripe down center of document


as you have cleaned the scanner glass..try these steps..
1)connect the printer to the wall outlet..
2)then try to make a copy..if you get lines..then go to next step..
3)unplug the power chord..press and hold OK and CANCEL button together..while pressing the buttons plug in the power chord..
4)after you plug in the power chord do not release the button till the screen goes blank..once its blank release the buttons and then turn on the printer..
5)try to make a copy..its still the same..it is a hardware issue..machine should be replaced
6)Call HP who would give u a rebate on old printer & replace it with brand new printer.

Mar 13, 2009 | HP Photosmart 2575 All-In-One InkJet...

2 Answers

HP 2575 Paper Jam


CLICK ON O.K. PRINTER WILL CLEAR ITSELF, BECAUSE THERE IS NOTHING IN JAM.

Mar 27, 2008 | HP Photosmart 2575 All-In-One InkJet...

2 Answers

Remote Operation


This manual isn't for the exact model you mention, but it's pretty close: http://www.swbfreedomphone.com/ib/ibcord/fm2570w.pdf Page 15-16 describe how to check your messages remotely.

Apr 14, 2007 | Northwestern Bell Southwestern Bell FM...

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

William Alequin

Level 3 Expert

922 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...