Question about Frigidaire Affinity ATF7000ES Front Load Washer

1 Answer

The chime doesn't go off at the end of the cycle. How do I fix this?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Hi,

Please press the "Options" button until the light next to "Signal Volume" is blinking, then hit Select until you have the desired volume.

Good luck!

Posted on Apr 06, 2011

  • 1 more comment 
  • efirdgal Apr 06, 2011

    There is no options button on my washer. The chime works when I'm selecting a load or changing settings. It just won't work at the end of the cycle any more. It was doing it until recently.

  • TobiasK Apr 06, 2011

    Is it one of these;http://www.greenoptions.com/products/fri... In that case the middle on of the 5 large buttons should be the Options button. What does yours say?

  • efirdgal Apr 06, 2011

    It doesn't have an options button. It says options above 6 buttons. Pre treat, clean washer, etc. One of them is a chime button. It only lets me choose on or off. It works when I'm selecting a cycle, just doesn't chime at the end. And it's on, on.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my maytag dryer


sounds like its hung in a loop unplug wait a few min. plug back in

Dec 14, 2015 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Ford ZX2 courtesy lights and chimes


Sounds like a problem with the sensor in the driver's door latch.

Jun 28, 2013 | 2002 Ford ZX2

1 Answer

I have a Whirlpool Duet Dryer Model WED94HEXW0 and the end of cycle chime is not as loud as the matching washer, therefore, we cannot hear it when it is done. I have excellent hearing and don't u


you cannot make it any louder than it already is , Set a egg timer and keep it near by . sorry for the poor solution but there is nothing you can do

Feb 20, 2013 | Whirlpool GEW9250P Electric Dryer

1 Answer

Can you disable the chime at the end of the time cycle on my microwave


Yes , You can disconnect the chime or SOFTEN the chime by just insulating the gong if this is mechanical type or to disconnect the buzzer if this is the electronic control board

Jan 10, 2013 | Microwave Ovens

1 Answer

I have a IQ America doorbell with 5 chimes and 5 tunes and the bell only plays a sorta gong which cannot even be heard How do I fix this problem so that it plays a chime/tune?


We had a similar problem with a wired doorbell. There is a diode in the doorbell itself that causes the chime to ring fully. If the diode is backwards, you get just a small tone and can only hear the full chime if you hold the button down. If this sounds like your problem, open up the doorbell at the button end (or have an electrician do it) and reverse the diode.

Nov 07, 2011 | Desa International White Wireless Plug In...

1 Answer

How do I turn off the sound, especially the jingle/chime when my LG WM3987HW finishes its cycle? Thanks!


not on all washer can the sound be turned off if your washer can you should find a "end of cycle signal" button on th efront panel

Sep 05, 2011 | LG WM3988HWA Front Load Washer / Dryer

1 Answer

Goldstar MV-1555ST Microwave The end of cycle chime or end of time chime (probably same component) quit working is this on circuit board? Or can it be replaced seperately.


I was not aware that there was a sound on/off option menu. Read manual and turned back on not sure how it got off definately not on purpose.

Dec 30, 2009 | Goldstar MV-1555ST 1000 Watts Microwave...

1 Answer

What is the 5 chime, cycling 5 times, then off? comes on after I start the car. Thanks, Jim


Is your airbag light on or not working? does your seatbelt light work? do you wear your seatbelt? This type of chime usually indicates a problem in the SRS system. (safety restraint system) Assuming 5 chime pause 5 chime pause and continues for 5 cycles and then stops.

Oct 17, 2009 | 1999 Ford Taurus

1 Answer

Buzz when changing cycles


there isnt, or at least shouldn't be a buzzer to let you know its changing cycles, only end of cycle. if its buzzing betwwen cylces theres problem a woudl assume eith timer( if theres a selector forit try turning of end of signal chime any way

Feb 26, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Washing Machines Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...