Question about Garden

Open Question

My black & Decker Jigsaw with model XTS 10E Type 01 has broken blade holder. Where can I buy the spare part? Why my tool model no. is not listed in the Black & Decker list of models?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Black and Decker Battery Charger

Fault Codes Meaning of Fault Code F01 Internal Shorted Cell Battery - Cannot be charged. Have battery checked by certified auto service center.
Excessive Load on Battery While Charging - Check load. F02 Bad Battery Connection - Check battery connection.
Battery Voltage Tool Low to Accept Charge - Have battery checked by certified auto service repair. F03 Internal Open Cell - Have battery checked by certified auto service center.
Sulfated Condition - Battery needs to be reconditioned. See manual. F04 Overtime Condition - Battery will not accept a charge after 18 hours of continous charging. Battery may have internal
damage. Have battery checked by certified auto center.

Battery Charge Rate is Set Too Low - Set charger to higher charge rate. See manual. F05 Overheated Condition - Disconnect charger and allow to cool for 30 minutes. Check for ample ventilation. F06 Reverse Polarity F07 Alternator Output is Out of Typical Operation Range

Operation Codes I=I=I=I Battery Reconditioning - (The letters DES will display for the first three seconds) I-I-I-I Alternator Voltage Check OOO Charger Standby FUL Battery Fully Charged

Posted on Nov 20, 2008

Ad
  • 83 Answers

SOURCE: Looking for the Manual for a Black and Decker

Your going to need to contact a service center to get a manual. B&D own dewalt, that's why it's a dewalt site. Dewalt has a better name so they use it instead of B&D. Here is a listing of the service centers.
They might not stock parts and manuals for your tool anymore but it's worth a shot.

http://www.blackanddeckerservicenet.com/Support/FactoryOwnedLocations.aspx

Posted on Apr 02, 2009

  • 188 Answers

SOURCE: need new saw blade part no & size for remington model 104316-04

The part you will need is the 8SB. You can call Master Parts at 800-446-1446 or you also can find them online at www.masterparts.net. I hope this helps!

Posted on May 26, 2009

  • 7 Answers

SOURCE: I bought a used black & decker jigsaw no. 7548

several methods 1) turn collar near top of blade. spring return. same in reverse to insert. 2)Older type may have spindle screw which draws up collets to clamp blade. access to screw may be through body directly over blade shaft. thats all for now.
cheers

Posted on Aug 27, 2009

dontbother10
  • 2220 Answers

SOURCE: Need Black & Decker chainsaw Model CCS818

http://www.blackanddecker.com//customercenter/faq.aspx
Number 7
Go To “ServiceNet” link
Bottom of center column “Need a Manual?”, Enter model number, “CCS818” in window. HTH
Lou

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Finding a replacement blade for my jigsaw.... It's a handi works model#hw5552. Black decker


Hey Ima, I don't know where you live, but in the USA, you can take it to a Home Depot, Lowes, or maybe Ace Hardware and the "tool person" should be able to help you. If its made by Black & Decker, you should have no problem.

Jun 14, 2017 | Blade Saws

1 Answer

I can not find my instructions for the Dewalt321 jigsaw so i therefore cannot replace a blade that fell out


Most Dewalt manuals are available here: https://servicenet.dewalt.com/Home . There are 40 Dewalt power tools with 321 in the model number. Several are jigsaws. There are two types for the DW321 (TO3PAK-2LE JIG SAW) jigsaw. Please look at the label on the jigsaw to ensure that you get the correct model and type. The direct link to the manual for the DW321 Type 1 is currently https://servicenet.dewalt.com/Products/GetDocument?docName=402086-01,DW321.pdf&productId=2841&productType=3001&documentId=24909&translatedFileName=http://documents.dewalt.com/documents/English/Instruction%20Manual/402086-01,DW321.pdf .

To change the regular blade on the DW321 type 1, unplug the power tool. To remove the blade, pull the knob on the top of the jigsaw up about 1/4". Rotate the knob counterclockwise until the clamp opens. Do not force the knob after it stops. Insert the blade making sure that the back edge of the blade fits into the support roller. Rotate the knob clockwise until it clicks and then push it down.

I hope this helps.

Cindy Wells

May 24, 2017 | Blade Saws

1 Answer

I need a blade clamp for a model 105112 Mastercraft jig saw. Is there a substitute or universal clamp that fits?


Jig Saw Parts ' Tool Parts Direct

www.toolpartsdirect.com/saw/jig-saw.html
  1. Cached
  2. Similar
Shop online for jig saw replacement parts for fourteen of the world's most trusted brands at Tool Parts Direct. We have the largest online inventory of Bosch jigsaw parts, Dewalt jigsaw parts, Black and Decker jigsaw parts, as well as replacement parts from other top manufacturers ...

mastercraft jig saw model 105112 Questions & Answers (with Pictures ...

www.fixya.com > Forum > Tags
  1. Cached
  2. Similar
Find solutions to your mastercraft jig saw model 105112 question. ... i need a parts list for a mastercraft jigsaw/sabre saw model 105-106 See this webpage: ...

Craftsman Jig Saw Parts ' Great Selection ' Great Prices ...

www.ereplacementparts.com/craftsman-jig-saw-parts-c-158286_171667.html
  1. Cached
  2. Similar
Repair Parts Home Power Tool Parts Craftsman Parts Craftsman Jig Saw Parts. ... 07021 Craftsman Sabre Saw Parts. ... 315171600 Craftsman Sabre Saw 1/2 Inch Stroke Variable Speed Parts. 105112 Mastercraft jig saw Google Search

Nov 23, 2016 | Saws

1 Answer

Kind of blades for black & decker jigsaw model # 7530-04


Go to any Home Depot and bring the tool , they will show you what fits the tool.

Sep 18, 2016 | Black & Decker Saws

1 Answer

The blade broke off inside and I can't get it out. Please help me figure how to get it out.


moden jigsaw blades are held in with a taper chuck system
disconnect the unit from the wall socket
push the spindle all the way in
now press on either side of the blade holder and that should move down releasing the blade
now while holding that section down turn the unit right side up and the broken bit should just fall out

Oct 13, 2015 | Skil 4495-01 6 Amp Orbital Jigsaw

1 Answer

What models of jigsaw blades are suitable for cutting wood using a Black & Decker DN31-H1 Jigsaw?


Blade can be had at any hardware store or home improvement store. There are a lot of wood cutting blades available depending on the hardness of the wood and how thick the material is

Nov 06, 2014 | Saws

1 Answer

Hi I have a Black and Decker Jig Saw 7588 Type One that works fine but I can not find replacement blades for it here in San Diego, California. Where can I find the blades?


I have the blades and the 7588 jigsaw. thinking about selling on ebay. search for black & decker jigsaw w/ blades in next couple days if interested in buying saw with 6 blades. thankyou, makthriftsales

Jan 14, 2013 | Black & Decker Single Speed Jig Saw

1 Answer

How do you put a new blade into a Black & Decker JS4000 Type 1 jigsaw


There is a black plastic switch where the blade is slid into the jigsaw. The black plastic switch can be seen and accessed from the front of the jigsaw through the clear plastic sight guide...You pull the black switch toward the bottom of the jigsaw and it opens the space for the blade to slide into, when you release the switch it will close the space and lock the blade into place.

Hope this helps.

Mar 06, 2011 | Garden

1 Answer

How do i remove the blade on a black and decker U255S Jigsaw


either on the left or right side of the blade holder there will be a little lever to pull that will release the blade, pull on the blade at the same time you pull on this release

Jan 17, 2011 | Black & Decker Black Decker Orbital...

2 Answers

Black & Decker Blades


the blade jig saw does not stay in on black &decker js2500

Mar 07, 2010 | Black & Decker Scroll Jig Saw Blade

Not finding what you are looking for?
Garden Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

603 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...