Question about PC Desktops

1 Answer

Bluetooth so it has bluetooth for sure,right?but there is no key for bluetooth on keyboard.there is only the wi-fi key under it.i've tried n times to find it,but i didn't.i only found a bluetooth monitor installation.does it have anything to do with it?

Posted by on

  • Tim Babcock
    Tim Babcock May 11, 2010

    I know I have see some Toshiba computers out there that carry the drivers for it but don't have it built in. Why they did this I don't know because the bluetooth drivers aren't compatible with anything other than Toshiba products. I can look the specs up on line through the user manual and see if thats the case. Does the driver indicate if it is on?



    What is the make and model number of the computer?



×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,794 Answers

Here is the link to the manual

See page 137 of connectivity.

Pg 162 indicates that Bluetooth is available if it is installed using Configfree.

Pg 210 indicates that the hot key to enable Bluetooth is the F8 button. The Bluetooth should light up once it's enabled. If it doesn't light up after press F8 though the cycle than the feature wasn't installed.

There was a fear for awhile that the Bluetooth and WiFi signals would conflict each other and that could be why it wasn't installed. I have a cell phone from Nokia with both WiFi and Bluetooth and it really isn't the case. It just makes the battery go down faster.





Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i Resolve efficiently this specific intermittent connection problem. -I'm using Wi-fi at home. -I'm using a Tp-Link TL-Wn722N High-Gain Wireless Key. -The problem occurs under windows XP Home...


Not sure what your actual question is. Are you saying that your WinXp machine cannot connect to the wireless network at boot time, but then it is able to at some later time? Please start with the explicit issue you have, and we can go from there.

Oct 18, 2013 | Acer PC Desktops

1 Answer

Emachines 1201 spec


Turn on your computer and locate the Wi-Fi icon.

This could be located on the upper row on a laptop it will have the radiation look (((·)))

Make sure its pressed on.


The internet connection is located in the system tray in the bottom-right corner of the screen.


The icon looks like a series of rectangles that increase in size from left to right.

Right-click the Wi-Fi icon and select "Connect to a network." You will see a list of available wireless networks.


Choose a Wi-Fi network you want to connect to and select "Connect."


Enter the password into the password text box if a password is required.

If a password is not required, you will automatically connect to the Wi-Fi network.


Click "OK."




Click start control panel administration tools computer management device manager scroll to sound video and game controllers you might see a yellow question / exclamation? ! mark or a red X Right click to reinstall drivers


If your computer came with a motherboard disk the drivers could be on it

or you might download slimdrivers.


Rather doing a driver hunt

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

Windows XP/Vista/7/8


Note: it will find all of your outdated drivers


This is a free driver solutions

which will automatically search for and find the correct driver

You will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point.

Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated.


It might take some time being free
also

http://download.cnet.com/2000-20_4.html


Just type in what you want or need be specific you might have to try a few times to get it right.


Tick in either the all software or the windows software box.

IE: motherboard name sound drivers


http://download.cnet.com/drivers-for-free/3000-18512_4-75548155.html

Windows XP/2003/Vista/Server 2008/7/8 free drivers


http://download.cnet.com/drivermax/3000-18513_4-10572602.html

Windows 2000/XP/Vista/7/8 free driver program


Hope it helps.

Nov 29, 2012 | PC Desktops

1 Answer

Can't seem to find bluetooth on laptop. i have got a aspire 5735


Above the keyboard is a row of four buttons: Wi-Fi on/off, volume up, volume down, and Bluetooth on/off. This model does not include Bluetooth...

The above is from a review on CNET for your model of laptop, the complete review can be read here:

http://reviews.cnet.com/laptops/acer-aspire-5735-4624/4505-3121_7-33309965.html

Dec 09, 2008 | Acer PC Desktops

1 Answer

I cannot find the wi-fi switch on my acer aspire 5735. how do i switch on the wireless internet function?


Above the keyboard is a row of four buttons: Wi-Fi on/off, volume up, volume down, and Bluetooth on/off wifi is usually on the left

regards

Nov 24, 2008 | Acer PC Desktops

3 Answers

Wireless problems.


hi dear

try to make your firewall off,

or try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Mar 28, 2008 | PC Desktops

1 Answer

Problems with wireless


hi dear

try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Mar 23, 2008 | PC Desktops

1 Answer

I have installed the linksys software but can't create a wireless connection with my laptop even though I know it is wireless enabled. During installation, there is a Wireless Connection Failure.


hi dear

try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Mar 18, 2008 | PC Desktops

1 Answer

A D-Link to SMC Wireless Internet Sharing...


hi dear

try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Mar 18, 2008 | PC Desktops

1 Answer

I have set up a home network using the Linksys wireless G router. I have networked one laptop to the network with no problem. A second laptop I am trying to connect just will not work. I need help,...


hi dear

try this way....

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Mar 18, 2008 | PC Desktops

2 Answers

Wireless connection stumble.


hi dear

try this

  1. Before you attempt to use any Wi-Fi network, find out what the SSID, Channel, Mode and WEP key are. Some Wi-Fi locations do not require a WEP key. Many Wi-Fi providers have this information on their web site or when you purchase access you will be provided the information.
  2. Ensure you have a firewall program installed and running. This will protect your data.
  3. Start up your laptop and once booted, look for the Wi-Fi network icon in the bottom right of the screen.
  4. Click on the Wifi Connection icon on bottom right of screen and you should see a window that indicates connection, strength and duration. Click on the Properties tab.

  5. wirelessnetworkscreenbl.jpg

  6. The next window will show the type of networking card installed. Click on the Wireless Networks tab.

  7. 02ee437.jpg

  8. Once the Wireless Network Connection Properties window is open you will have two options depending on how you set up your laptop.
    • If you do not see any networks listed in Preferred or Available networks, you will have to manually add the SSID. Click on Add. You will have to enter the SSID and WEP key (if required). Click OK and you should then see the network you just added in the Available networks box.

    • 4d25eb5.jpg

    • If you see the correct SSID showing in the Available Networks, then you need to click on Configure in order to enter the WEP key if that is required.

    92752af.jpg

  9. In the next window, enter the SSID for the Wi-Fi network you want to access. Make sure you do not have CAPS lock or NUM lock while entering the information. If a network key is required, click on "Data Encryption and then enter the Network key you have been provided with. Again make sure you do not have CAPS or NUM lock on. Click OK when entered. If you have entered the key incorrectly a message will pop up and you will need to re-enter the key.

  10. fccfda9.jpg

  11. Next go to Start - and where it says Connect To click on that and you should see choices like in the graphic below. Click on Wireless Network Connection and it should work.

34b0a7b.jpg

There are occasions when the connection doesn't work, in these cases check your firewall software and make sure it allows you to connect to the Wi-Fi network. To check this, disable your firewall software and check the connection again. If you can connect with the firewall program disabled, you change your settings. If your firewall program is not the problem check the SSID and WEP key information that you entered. Both of these are case sensitive. If you had obtained SSID information from the Internet, check with someone in the establishment to see if the SSID has been changed.

oke post in me back

i hope this usefull for you


thanks


cropp

Mar 16, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...