Question about HP PSC 1315 All-In-One InkJet Printer

1 Answer

Test page My HP 5652 prints the test page every time I switch it on. The only way to stop it is to press Cancel every time right after switching on the printer. It used to be fine and only print the test page on demand, but after the ink was changed it does it every time.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 158 Answers

Try shutting down your PC and printer. Next,unplug PC from wall outlet. Next, unplug printer USB cable from the PC, then unplug the USB cable from the printer. Unplug the printer from the wall outlet. Wait 30 seconds. Next, plug PC back into outlet, turn it on, and wait until it has completely initialized and is ready to use. Next, plug in the USB cable from the printer to the PC, and turn on the printer. Windows should automatically detect the printer, and will proceed to install it. After the PC finishes the install, test the printer in all modes, including self-cleaning, to see if the problem is eliminated.

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to print test page for HP deskjet 5652?


Press and hold down the Resume button until the printer starts printing a self-test
page, then release the button.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Apr 16, 2011 | HP DeskJet 5652 InkJet Printer

1 Answer

Printer troubleshoot


try to cancel all the print jobs ....
you will see a small printer icon in the start taskbar
somewhat near the clock ....

double click it...
cancel all the print jobs...
switch off the printer and then switch on the printer again

Dec 22, 2009 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

Problem with printing test page every time switch on


hi,
this is kshitij
just scan the test page then test page will not be printed every time when all of you power on the printer.

Feb 23, 2009 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

My printer keeps printing the test page every time it's switched on


Unplug the printer and leave it for three minutes and then plug it back in. This will reboot it and it may cure the problem.

Feb 05, 2009 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

C3180 will not print as error occurs even when installed


Try printing a manual self-test page:

1. Press and hold Cancel on the control panel.
2. While holding Cancel, press Start Copy Color.

The self-test report prints, containing the serial number and service ID.

This should tell you if it is a problem with the unit itself, or with communication between the unit and your computer.

Feb 19, 2008 | HP Photosmart C3180 All-In-One InkJet...

10 Answers

My printer keeps printing the test page every time it's switched on


0.gif Re: HP PSC 1513 all in one by Bert t.gif (9/25/07 1:07 PM) reply + / - http://h10025.www1.hp.com


0.gif Re: Re: HP PSC 1513 all in one test page always pr by Anonymous (12/12/07 6:14 AM) reply + / - Subject : How to disable the test page that always prints when you switch on the HP PSC 1513 all-in-one printer.

Take the test page ( also called : alighnment page ) that always prints when you switch on the printer and place it face down in the scanner.

Then press the scan button on the printer itself.
(this is the button at the bottom of all the buttons on the printer/scanner.)

Make sure that the printer scans the test page.
( sometimes you press the butoon and it doesn't scan )
( it makes a scanning noise when scanning succesfully )


Then it will stop printing the test page ( alignment page ) ever again.

This is a really stupid product feature on HP's part to waste ink and force people to buy more cartriges.


beukes2@gmail.com

Nov 29, 2007 | Printers & Copiers

2 Answers

Aligning printer after new ink cartridge inserted


SOLUTION: Start the cartridge alignment by performing a series of button presses from the front panel of the product.
  • HP PSC 1200 and 1300 series:
    1. Turn on the HP PSC 1200 or 1300 series product.
    2. Disconnect the USB cable from the all-in-one.
    3. Press the sequence of front panel buttons below to start the print cartridge alignment process. The button-press sequence must be completed within ten seconds. It might take several tries to complete the sequence within ten seconds.
      1. Press and hold Cancel .
      2. While holding Cancel , press On .
      3. When the Check Paper and Check Print Cartridge lights begin to blink simultaneously, release both buttons.
      4. Press Cancel again.
      5. Press Copies .
      6. Press Paper Type .
      7. Press Color Start Copy . The alignment page will begin printing. If the alignment page does not print, repeat the button-press sequence in this step.
    4. When the alignment page has printed, place the page face down on the scanner glass and press Scan . The alignment is complete when the On light stops blinking.
    5. Reconnect the USB cable.
CAUSE: This can occur if the cartridge alignment is canceled or times out without a valid print cartridge alignment stored in memory.

Oct 29, 2007 | HP PSC 1350v All-In-One InkJet Printer

1 Answer

HP deskjet 5652


Well, one way is to just take the paper out when it tries, and when it gives you an error message tell it to abort the print. Another way is that the second it starts printing press the power button, or cancel button if it has it, that will tell the printer to stop printing.

Aug 02, 2007 | HP DeskJet 5652 InkJet Printer

22 Answers

My printer keeps printing the test page every time it's switched on


I had the same problem and it was driving me crazy until I did this. Please follow exactly and IN ORDER.

1. Turn off the printer and wait 10 seconds. Turn it on again

2. Let the printer print the test page.

3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.

4. Place the test page on the scanner glass and press the SCAN button on the printer. The ON light will flash as the page is being scanned.

5. Remove the test page when the ON light is steady.

6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages! Yay!

(You may now reconnect the printer to your computer via the USB cable.)

Dec 23, 2006 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...