Question about HP Officejet 5610 All-In-One InkJet Printer

1 Answer

My printer will not print in black. I put in a new black cartrige after the old one did the same thing so I know its not the cartrige itself. I used the instructions on the printer for it to clean the cartiges and the test print it does only prints black very faintly and only on one side.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 17,130 Answers

Maybe there is fault in the software and will need a re installation. so remove your printer from the PC and un-install the printer software. Now reinstall the printer software and then connect the Printer to be detected and installed. Check printer properties to see the ink levels.
Use head cleaning before a test is taken . It is possible that the head is not reacting to the need of the command , can be an issue with ink drying , can
also be poor ink cartridge contacts

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Black Cartrige Missing


Did you use a brandname ink cartridge - or is it a knock-off brand? If it is a brand name - then the cartridge is most likely defective. If it is a knock-off brand - some printers do not recognize the electronic in the cartridge and therefore don't see it as one being installed.

This may also help

Dell 922 AIO Black Ink Cartridge Missing Message

May 02, 2017 | Dell AllinOne Multifunctional (v515w)...

1 Answer

How do i trick kodak esp office 2150 after refilling black ink


completely agree with you jeff! I think it just runs off of the date you put the last printer cartrige in or how many prints you have ran with it in. theres a little "microchip" thing on the front of the cartriges that if you switch that out with one off of a new cartrige, your old one will still work fine. but then you only have a certain amount of time/prints that will still come out of your new cartrige if you switch it back after the old cartrige is depleted. If you even deplete the whole old cartrige before the printer decided that the chip on that one is too old or printed too many pages...complete BS, I dont think I have ever been this mad at company before, and I will never ever buy another kodak product again!!!

Jan 08, 2013 | Kodak 2150 ESP Wireless All-in-One Printer

1 Answer

Hi, I have an epson stylus cx6600 , I replaced the black ink and the pages printed afterwards were full of lines, I cleaned the nozzles and cleaned the heads twice. I then took out the black ink cartridge...


Did you put a new cartrige the first time, or just put ink in the old one? Ink cartriges dry out. If you let them sit for extended periods of time, you don't save ink, you let them dry out. You can try to bag and wrap them if you are not going to use for awhile and see if they keep longer...but usually you just have to get a new one. I've heard you can put tape over the end of it to keep it longer...don't know from experience though. New carts will usually do the trick though.

Jan 12, 2010 | Epson Office Equipment & Supplies

1 Answer

The printer do not recognize the new replacement cartrige


I have many epson printer, some more than 5 years old. It's ok. some have printed more than 50.000pages, it's ok.
If Ink cartridge Unrecognizable, there are two posibilities : Chip Error at ink tank, or printer error. For chip error, try to plug the ink tank to another printer (same type). If the ink tank recognized by other printer, so the problem is printer.
So ;
1. Check chip conector at head carriage.
2. Check the wiring of the head, and chip.
If two point above is ok, the last action is check the power supply and board. It may be epprom is damage.

May 28, 2009 | Epson Stylus R380 InkJet Photo Printer

1 Answer

Fairly new toner and display reads "Install black cardtricge"


I have just resolved the "Install black cartrige" issue on my printer I am not sure if it will solve everyone's problem but these are the steps I took to solve the problem.

1. removed the black cartrige.
2. removed all the paper from the tray and noticed that one of the pages was a little jammed.
3. I then turned the printer on and off again and still encountered the "Install black cartrige" error message.
4. I then put the black cartrige back in the the printer and restarted the printer.
5. When the printer restarted it started to initialize correctly and I perform some test prints to confirm that it was back up and running.

Apr 07, 2009 | HP LaserJet M1522nf Multifunction Printer...

2 Answers

Wont print black


Ok. Remove both cartriges. Put them aside. Remove the new printhead from its bag and all the protection things. To remove the old one, press the button at the top left of the printhead. Put the new printhead in, secure it by pressing the sticker with the finger, and replace the cartriges and print the alignment page.

Mar 05, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My Kodak 5300 won't print color


MAYBE YOU ADDED A BLACK INK CARTRIDGE RATHER THAN THE COLOR ONE ? OR MAYBE YOU HAVE THE COLOR CARTRIDGE PLUGGED INTO THE BLACK INK ONE ? DONT KNOW IF THIS WILL HELP BUT THOSE WOULD BE THE FIRST FEW THINGS I WOULD CHECK. I ALWAYS SEEM TO MISS THE OBVIOUS WHEN SOMETHING ISNT WORKING FOR ME

Jan 09, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

CARTRIDGE TROUBLE


take the new one out again and then replace it again

Nov 02, 2008 | HP DeskJet 5550 InkJet Printer

1 Answer

Printer Issues


my hp psc 2210 after putting in new cartridge keeps saying press enter to align cartridge. it keeps repeating the same reading.

Apr 08, 2008 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

Black ink not printing


This is what worked (so far) with my Dell1.gif AIO A940 printer1.gif that wouldn't print black ink.

It worked for awhile when I chose photo/glossy paper, but then it quit printing again (see below).

PRINT, PROPERTIES, PAPER SETUP, SPECIALTY PAPER, PHOTO/GLOSSY


I got it to print, again, by putting SEVERAL papers in the feeder (instead of just 1) - there is a sensor that is supposed to automatically detect paper type, and it might not be working right, especially with one or only a couple of sheets.

Nov 09, 2007 | Brother DCP-340CW All-In-One InkJet...

Not finding what you are looking for?
HP Officejet 5610 All-In-One InkJet Printer Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...