Question about Samsung CLP 300 Laser Printer

1 Answer

My CLP300 printouts have a mark that reoccurs every 80mm or so. What could be the problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,719 Answers

Dirty print out is basically due to cartridge related issues. Take out the cartridge and clean its drum/ (green roller) with a dry, soft, lint-free cloth. The drum is usually located under a cover. Checkout for any spilled toner inside the printer and clean it also. Print a few pages so that the parts get further cleaned. I think, this would solve the issue.

Moreover, black streaks (thicker lines) and dots etc indicate faulty PCR Roller which is located behind the green drum inside the cartridge. In this case refilling would not help.
So, it is recommended that you replace the cartridge with a genuine one (not any replacement or refill).

Let me know if any further clarification is required.
Hope it helps! Good Luck!
CreativeTECH

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error maeesge and no auto focus


What message? if an FEE, perhaps you forgot to put the Diafragm marking to the greatest figure (22 or so) and forgot to put the lock on.
Next time, I think it could be very helpful you tell what error you see. Nobody needs to guess what you see.

Feb 04, 2014 | Nikon D80 Digital Camera with 28-80mm Lens

1 Answer

Samsung CLP300 black & yellow cartridges do not have chips on them


No, the black and yellow toner cartridges does not have chips because they are "starter cartridges", to solve your problem you must execute a "PERIODIC DEFECTIVE IMAGE" readjustment, you can download the service manual from here:

http://www.tradebit.com/filedetail.php/229896734-samsung-clp300-series-clp-300-xsg-service

Best regards,

Jul 14, 2013 | Office Equipment & Supplies

1 Answer

What is the fork fluid level on my wr250 2003?


The Haynes Book says
1999-2003
Standard 135mm {5.31in}
Minimum 80mm {3.15in}
Maximum 150mm {5.91in}

Hope that is what you were looking for

Mark C

May 10, 2011 | 2003 Yamaha YZ 250 F

1 Answer

Samsung CLP 300 Printer


smasung clp300
just clean toner weast chember and also drum unit.

sometime if u user refilled cartridges after use this u have facing this porblme.
pl do this it work perfect.

www.howtorefill.com

Jun 02, 2010 | Samsung CLP 300 Laser Printer

1 Answer

My Samsung CLP300 has a paper feed problem. When


Hi,

Lift up the front of your machine about 4 inches with a book.
The paper will now feed easier.

Richard

Oct 27, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Samsung clp300 color laser printer not printing


The cartridge dried out and the moisture/liquid sensor will no longer detect new fillings though the layer. A good refill needs to be done before the ink is out. These are tedious little critters. Try the nozzle cleaning procedure several times(through your printer's software. Take out the cartridge and set the jets on a cotton ball soaked liberally with cleaning fluid. Run the nozzle cleaning procedure again.

Jul 05, 2009 | Office Equipment & Supplies

1 Answer

Ink marks on printouts


more than probably you had stranger objects there like piece of paper etc

Jan 15, 2008 | Epson Stylus Photo 950 InkJet Printer

1 Answer

Regular toner drag marks on printout


MACHINE DRUM UNIT, IMAGE BELT, AND TONER UNIT NEED TO BE REMOVED AND CHECKED AND CLEANED IF THEY LOOK GOOD THERE MIGHT BE A PIECE OF PAPER BLOCKING THE LASER SITE AREA INSIDE THE MACHINE IF ALL IS GOOD, CHECK THE FUSER FOR WOREN HOT ROLLER ,DIRT OR PAPER WILL BLOCK THE IMAGE TH THE PAPER

Dec 30, 2007 | Konica Minolta magicolor 2400 Laser...

Not finding what you are looking for?
Samsung CLP 300 Laser Printer Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

Victorman
Victorman

Level 3 Expert

824 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...