MY Epson T10 does not feed the paper and sounds noisy every time i turn it on. why am I gonna do?

If your Epson Stylus SX435W is indicating that there is no paper even though there is paper loaded, there could be several reasons for this issue. Here are some steps you can try to troubleshoot the problem:

1. Check that the paper is loaded correctly: Ensure that the paper is loaded into the printer's paper tray or cassette correctly. Make sure that the paper is aligned properly and not too tightly or too loosely loaded. Also, make sure that the paper is not curled or wrinkled.
2. Check for paper jams: If the printer sounds like the wheels are turning to engage the paper but the paper doesn't move, there may be a paper jam. Carefully check for any paper jams, and remove any paper that may be causing the problem.
3. Clean the paper feed rollers: Over time, the paper feed rollers can get dirty or covered in debris, causing them to slip and not grab the paper properly. Use a lint-free cloth dampened with water to clean the rollers. Be sure to let them dry completely before attempting to print again.
4. Reset the printer: Sometimes resetting the printer can clear any errors or issues that are causing the "paper out" message. Turn off the printer, unplug it from the power source, wait for a few minutes, and then plug it back in and turn it on again.

If none of these steps solve the problem, you may need to contact Epson support or take your printer to a service center for further assistance.

Based on the symptoms you described, it sounds like there may be a timing issue with your Epson R1900 printer. The erratic spacing and repeated printing of the same image or text on the next line suggest that the paper advance mechanism is not functioning properly. This could be caused by a number of factors, including a worn or damaged paper feed roller, a misaligned paper feed mechanism, or a malfunctioning sensor that controls the paper advance timing.
To troubleshoot this issue, you can try the following steps:

1. Check the paper feed roller for wear or damage. If it is worn or damaged, it may need to be replaced.
2. Check that the paper is loaded correctly in the printer, and that it is not jammed or wrinkled.
3. Check that the paper thickness setting in the printer driver matches the paper you are using.
4. Clean the paper feed mechanism and paper feed roller with a soft, lint-free cloth.
5. Reset the printer by turning it off, unplugging it from the power source, and leaving it unplugged for at least 10 minutes before plugging it back in and turning it on again.

If none of these steps resolve the issue, you may need to take your printer to a qualified technician for repair or replacement of faulty parts.

There is a good chance that you have dislodged one of the paper feed sensor arms. These are lightly sprung and can be popped out of their mountings creating further jams and registering continuous paper jams when there is nothing in the paper path. Also it is worth checking to see if any sheets came out ripped or with a segment torn off. These often catch on the paper sensor and can be difficult to see. Try feeding a sheet of reasonably stiff paper back through the tractor roller as this often pushes such obstructions back out of the way.

Follow this link to get possible solution: https://h10025.www1.hp.com/ewfrf/wc/document?docname=bud04237&tmp_task=solveCategory&lc=en&dlc=fr&cc=us&product=58720


If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

maybe your printer is running out of ink...or theirs a paper jam..check the paper feed,or if your printer had ciss..all you need to do is to resset its chips on the cartridge.

Epson 1520 printer - Paper feed issues

Tumalon ka Sa Tulay tapos ok na Unit mo

Hi.
Check for a paper jam inside the paper feeder... There's something blocking the path that is why the 3-beep is activated. Also put lubricant to the head's round-bar, gears and levers.

Goodluck... Fixya me...

try to look at your rollers made of black rubber, if they are shining then they need cleaning, if you know how to open the unit to get to all these rollers then you might be able clean them yourself with laquer thinner and a rag, where gloves and turn the rollers into the soaked rag and keep turning tight with lots of elbow grease until all rollers lost that shine.

if you look down where the paper feeds there is a roller as you pulled the paper back upwards out of printer you have forced the roller the wrong way you will have to push the roller round by hand it will click and clunk till it goes back into its proper location