Question about D-Link DSL-G604T Wireless Router

1 Answer

When I set up wep on router and save my computer can not find it on view internet connections, when I disable it it comes back on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 32,281 Answers

You need to configure your D-Link wireless settings again.
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Router working but as soon has i secure it with a WEP key my wireless wont work anymore ???


You may need to edit the settings in the connecting computer, it may be using old specs and being rejected....without prompt, on some OS.

Jul 12, 2011 | Linksys Wireless-G WRT54GS Router...

Tip

How to Configure the Brand New Belkin Routers?


Hi Friends,

Please follow the below mentioned steps for the configuration of Belkin Routers for any Model in both Wired and Wireless Computer

For Wired Computers:
Step 1: Connect the Modem to Router (in the port named Modem) and take another ethernet cable and connect one end to the Router(in the port named wired) and other end to any one of your computer

Step 2: Open the Internet explorer and type 192.168.2.1 and click on Enter in the keyboard

Step 3: Now you will be able to see the belkin router setup page

Step 4: On your left hand side click on Connection type,it will prompt for Login Password,leave it blank and click on Submit

Step 5: Now select the Connection type as "Dynamic" and Click on Next.

Step 6: In the next screen,leave the host name as Blank and Click on Apply Changes

Step 7: The Router will save the information and bring back to the router setup page

Step 8: Now,on your left hand side click on MAC Address or MAC Address Cloning.

(If it ask for any Login password,leave it blank and click on Submit)

Step 9: Click on Clone and Click on Apply Changes

Step 10: The router will save the information and bring back to the same page

Step 11: Now check the Internet Status on the top right hand corner,Check wither it says connected or not connected

If it says connected, then you can start to go online in the wired computers

If it says Not connected or no connection,then please follow the steps

Step 12: Unplug the power cable of both your modem and router,leave it for 10 secs,then put the power cable only on to the modem and wait until all the lights are lit up,then put the power cable back to the router and check wither u are able to see all the lights in the router.You will be able to see all the lights glowing and the Internet status:Connected.

You can start to go online in the wired computers

Wireless Computers:
Step 13: In the Belkin router Setup page,on your left hand side,if you have Wifi Protected Setup(WPS) Click on it.

Step 14: It will Promot you for a login password ,leave it blank and Click on Submit

Step 15: Change the WPS to Disable and Click on Apply Changes

Step 16: The router will save the Information and bring back to the same page

Step 17: On your left hand side,click on Security.

You can select any security type, the belkin routers have 2 types,they are

A) WEP(64-bit WEP)
B) WPA
C) Disabled

A) WEP (64-bit WEP):

If you are selecting the Security type as WEP (64-bit WEP) then you will be able to see the Key 1 with 5 small boxes.You have to type 2 numbers in each box only in Key 1.

After you have typed please make a note of it and Click on Apply Changes.

B) WPA:

If you are selecting the Security type as WPA then you will be able to see the Preshared key or Password (PSK),in that box you can type as thing as you wish.

After you have typed the password please make a note of it and Click on Apply Changes

C) Disabled:

If you feel no need of any security for your Wireless Network you can select the option as Disabled and Click on Apply Changes

Step 18: After you have selected any one of the Option,now on your left hand side Click on Channel and SSID.

Step 19: Changed the SSID to any name as you wish

Step 20: Change the Wireless Channel to 6 or 1

Step 21: After you have changed please click on Apply Changes.

Step 22: Now we have configured the Router for both Wired and wireless Computers

To Check the wireless computers:

Step 1: Go to the wireless computer

Step 2: If it is a laptop turn on the wireless switch in the laptop

Step 3: Now Search for wireless Networks in the range,please see below according to your Operating System

WINDOWS XP:

Start---->Control Panel----->Network and Internet Connections(Network and Internet)---->Right Click Wireless Network Connection---->Click on View Avaliable Wireless Network

WINDOWS Vista:

Start---->Control Panel---->Network and Internet (Network and Sharing Center)---->On your left hand side click on Manage Wireless Networks------>Right Click on Wireless Network Connection----->Click on Connect

WINDOWS 7:

Start----->Control Panel---->Network and Internet (Network and Sharing Center)------->On your left hand side Click on Change Adapter Settings---->Right Click on Wireless Network Connection--->Click on Connect

Step 4: Now you will be able to see the Network name which you gave in the Router,try to connect to this it will ask for password type it and click on Connect.

You will be able to connect in wireless and you will be able to go online in wireless computers

The above mentioned tips are the Complete setup of a belkin router for both wired and wireless computers

Regards,
Ayyasam

on Mar 18, 2010 | Computers & Internet

1 Answer

My daughter is unable to connect to my broadband. I rang my provider, non UK, all he told was 192.168.1.1. I gleened from our lengthy conversation that i need to change my forgotten password.


type the address he has given you into your internet address bar.
This will bring up the router settings page
Navigate to wireless settings and disable security for WPA and WEP
Navigate to security and change or delete the password

Save settings

See if your daughter can now connect wirelessly

Go back into the router as described above and set a new wireless WEP or WPA key
save / exit and check it works

Dec 30, 2010 | Computers & Internet

2 Answers

Edimax BR-6424n router wireless works fine with


This could be because the encryption settings in the wireless router has not been entered into the wireless card configuration. To secure your wireless network from unauthorized access, please click on this link and follow my instructions to configure the wireless router and the wireless card in the laptop/computer :-
http://www.fixya.com/support/r3559128-wireless_router_security

Jun 25, 2010 | Computers & Internet

1 Answer

Cannot setup my linksys wrh54g wireless router


Hi Friend,

In order to resolve the issue, please follow the steps:

If you have a cable internet connection:

1.Connect the wire (which is coming out from the modem, i.e, the internet wire)
into the WAN/Internet port of the router.
2.Connect your computer to any of the four LAN ports with a Ethernet cable(usually Blue/Yellow/Grey color wire)
3.Turn on the router
4.At the back of the Router there is a Red/Black button (Reset Button)
5.Push and Hold that button for 30 seconds.
6.Release the button and turn off the router for 30 seonds and turn it on again.
7.Type 192.168.1.1 in the address bar of the Internet Explorer and hit Enter
8.Enter the username and password (default password is admin and leave the username blank)
9.on the Setup page, make sure the Internet Connection Type is set to "Automatic Configuration-DHCP" and click Save settings.
10.Now click Wireless tab and fill the sections as mentioned:

Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Wireless Channel-6-2.437GHz
Wireless RF Control-Standard
Wireless SSID-Enabled
Wireless RF-Disable and click Save Settings

11.Now Click Wireless Security and fill the sections as mentioned(if you want to make your network password protected)

Security Mode-WEP
Default Key-1
WEP Encrypion-64 bits 10hex digits
Key1-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings


If you have DSL internet connection, then all you need is to change the Step-9 and all the settings will remain same.

Step-9 (for DSL internet connection)

Internet Connection type should be selected to PPPoE and enter the Username and Password provided by your Internet Service provider. Then click Save Settings.


After completing all the above steps, turn off the Router for 30 seconds and turn it on after that. You can connect your wireless devices.

I hope this will resolve the issue.

Regards
Chiranjeet

Jun 02, 2010 | Linksys WRH54G Wireless Router

1 Answer

Local access onlywill not connect to internet


you need to follw these steps...


For Wired Computers:
Step 1: Connect the Modem to Router (in the port named Modem) and take another ethernet cable and connect one end to the Router(in the port named wired) and other end to any one of your computer
Step 2: Open the Internet explorer and type 192.168.2.1 and click on Enter in the keyboard
Step 3: Now you will be able to see the belkin router setup page
Step 4: On your left hand side click on Connection type,it will prompt for Login Password,leave it blank and click on Submit
Step 5: Now select the Connection type as "Dynamic" and Click on Next.
Step 6: In the next screen,leave the host name as Blank and Click on Apply Changes
Step 7: The Router will save the information and bring back to the router setup page
Step 8: Now,on your left hand side click on MAC Address or MAC Address Cloning.
(If it ask for any Login password,leave it blank and click on Submit)
Step 9: Click on Clone and Click on Apply Changes
Step 10: The router will save the information and bring back to the same page
Step 11: Now check the Internet Status on the top right hand corner,Check wither it says connected or not connected
If it says connected, then you can start to go online in the wired computers
If it says Not connected or no connection,then please follow the steps
Step 12: Unplug the power cable of both your modem and router,leave it for 10 secs,then put the power cable only on to the modem and wait until all the lights are lit up,then put the power cable back to the router and check wither u are able to see all the lights in the router.You will be able to see all the lights glowing and the Internet status:Connected.
You can start to go online in the wired computers
Wireless Computers:
Step 13: In the Belkin router Setup page,on your left hand side,if you have Wifi Protected Setup(WPS) Click on it.
Step 14: It will Promot you for a login password ,leave it blank and Click on Submit
Step 15: Change the WPS to Disable and Click on Apply Changes
Step 16: The router will save the Information and bring back to the same page
Step 17: On your left hand side,click on Security.
You can select any security type, the belkin routers have 2 types,they are
A) WEP(64-bit WEP)
B) WPA
C) Disabled
A) WEP (64-bit WEP):
If you are selecting the Security type as WEP (64-bit WEP) then you will be able to see the Key 1 with 5 small boxes.You have to type 2 numbers in each box only in Key 1.
After you have typed please make a note of it and Click on Apply Changes.
B) WPA:
If you are selecting the Security type as WPA then you will be able to see the Preshared key or Password (PSK),in that box you can type as thing as you wish.
After you have typed the password please make a note of it and Click on Apply Changes
C) Disabled:
If you feel no need of any security for your Wireless Network you can select the option as Disabled and Click on Apply Changes
Step 18: After you have selected any one of the Option,now on your left hand side Click on Channel and SSID.
Step 19: Changed the SSID to any name as you wish
Step 20: Change the Wireless Channel to 6 or 1
Step 21: After you have changed please click on Apply Changes.
Step 22: Now we have configured the Router for both Wired and wireless Computers
To Check the wireless computers:
Step 1: Go to the wireless computer
Step 2: If it is a laptop turn on the wireless switch in the laptop
Step 3: Now Search for wireless Networks in the range,please see below according to your Operating System
WINDOWS XP:
Start---->Control Panel----->Network and Internet Connections(Network and Internet)---->Right Click Wireless Network Connection---->Click on View Avaliable Wireless Network
WINDOWS Vista:
Start---->Control Panel---->Network and Internet (Network and Sharing Center)---->On your left hand side click on Manage Wireless Networks------>Right Click on Wireless Network Connection----->Click on Connect
WINDOWS 7:
Start----->Control Panel---->Network and Internet (Network and Sharing Center)------->On your left hand side Click on Change Adapter Settings---->Right Click on Wireless Network Connection--->Click on Connect
Step 4: Now you will be able to see the Network name which you gave in the Router,try to connect to this it will ask for password type it and click on Connect.
You will be able to connect in wireless and you will be able to go online in wireless computers
The above mentioned tips are the Complete setup of a belkin router for both wired and wireless computers

Apr 03, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Router does not connect to internet


this is because your router is not configured for your ISP....

follw these steps, it may be helpful


For Wired Computers:
Step 1: Connect the Modem to Router (in the port named Modem) and take another ethernet cable and connect one end to the Router(in the port named wired) and other end to any one of your computer
Step 2: Open the Internet explorer and type 192.168.2.1 and click on Enter in the keyboard
Step 3: Now you will be able to see the belkin router setup page
Step 4: On your left hand side click on Connection type,it will prompt for Login Password,leave it blank and click on Submit
Step 5: Now select the Connection type as "Dynamic" and Click on Next.
Step 6: In the next screen,leave the host name as Blank and Click on Apply Changes
Step 7: The Router will save the information and bring back to the router setup page
Step 8: Now,on your left hand side click on MAC Address or MAC Address Cloning.
(If it ask for any Login password,leave it blank and click on Submit)
Step 9: Click on Clone and Click on Apply Changes
Step 10: The router will save the information and bring back to the same page
Step 11: Now check the Internet Status on the top right hand corner,Check wither it says connected or not connected
If it says connected, then you can start to go online in the wired computers
If it says Not connected or no connection,then please follow the steps
Step 12: Unplug the power cable of both your modem and router,leave it for 10 secs,then put the power cable only on to the modem and wait until all the lights are lit up,then put the power cable back to the router and check wither u are able to see all the lights in the router.You will be able to see all the lights glowing and the Internet status:Connected.
You can start to go online in the wired computers
Wireless Computers:
Step 13: In the Belkin router Setup page,on your left hand side,if you have Wifi Protected Setup(WPS) Click on it.
Step 14: It will Promot you for a login password ,leave it blank and Click on Submit
Step 15: Change the WPS to Disable and Click on Apply Changes
Step 16: The router will save the Information and bring back to the same page
Step 17: On your left hand side,click on Security.
You can select any security type, the belkin routers have 2 types,they are
A) WEP(64-bit WEP)
B) WPA
C) Disabled
A) WEP (64-bit WEP):
If you are selecting the Security type as WEP (64-bit WEP) then you will be able to see the Key 1 with 5 small boxes.You have to type 2 numbers in each box only in Key 1.
After you have typed please make a note of it and Click on Apply Changes.
B) WPA:
If you are selecting the Security type as WPA then you will be able to see the Preshared key or Password (PSK),in that box you can type as thing as you wish.
After you have typed the password please make a note of it and Click on Apply Changes
C) Disabled:
If you feel no need of any security for your Wireless Network you can select the option as Disabled and Click on Apply Changes
Step 18: After you have selected any one of the Option,now on your left hand side Click on Channel and SSID.
Step 19: Changed the SSID to any name as you wish
Step 20: Change the Wireless Channel to 6 or 1
Step 21: After you have changed please click on Apply Changes.
Step 22: Now we have configured the Router for both Wired and wireless Computers
To Check the wireless computers:
Step 1: Go to the wireless computer
Step 2: If it is a laptop turn on the wireless switch in the laptop
Step 3: Now Search for wireless Networks in the range,please see below according to your Operating System
WINDOWS XP:
Start---->Control Panel----->Network and Internet Connections(Network and Internet)---->Right Click Wireless Network Connection---->Click on View Avaliable Wireless Network
WINDOWS Vista:
Start---->Control Panel---->Network and Internet (Network and Sharing Center)---->On your left hand side click on Manage Wireless Networks------>Right Click on Wireless Network Connection----->Click on Connect
WINDOWS 7:
Start----->Control Panel---->Network and Internet (Network and Sharing Center)------->On your left hand side Click on Change Adapter Settings---->Right Click on Wireless Network Connection--->Click on Connect
Step 4: Now you will be able to see the Network name which you gave in the Router,try to connect to this it will ask for password type it and click on Connect.
You will be able to connect in wireless and you will be able to go online in wireless computers

Feb 28, 2010 | Belkin Computers & Internet

1 Answer

Need to get started


For Wired Computers:
Step 1: Connect the Modem to Router (in the port named Modem) and take another ethernet cable and connect one end to the Router(in the port named wired) and other end to any one of your computer
Step 2: Open the Internet explorer and type 192.168.2.1 and click on Enter in the keyboard
Step 3: Now you will be able to see the belkin router setup page
Step 4: On your left hand side click on Connection type,it will prompt for Login Password,leave it blank and click on Submit
Step 5: Now select the Connection type as "Dynamic" and Click on Next.
Step 6: In the next screen,leave the host name as Blank and Click on Apply Changes
Step 7: The Router will save the information and bring back to the router setup page
Step 8: Now,on your left hand side click on MAC Address or MAC Address Cloning.
(If it ask for any Login password,leave it blank and click on Submit)
Step 9: Click on Clone and Click on Apply Changes
Step 10: The router will save the information and bring back to the same page
Step 11: Now check the Internet Status on the top right hand corner,Check wither it says connected or not connected
If it says connected, then you can start to go online in the wired computers
If it says Not connected or no connection,then please follow the steps
Step 12: Unplug the power cable of both your modem and router,leave it for 10 secs,then put the power cable only on to the modem and wait until all the lights are lit up,then put the power cable back to the router and check wither u are able to see all the lights in the router.You will be able to see all the lights glowing and the Internet status:Connected.
You can start to go online in the wired computers
Wireless Computers:
Step 13: In the Belkin router Setup page,on your left hand side,if you have Wifi Protected Setup(WPS) Click on it.
Step 14: It will Promot you for a login password ,leave it blank and Click on Submit
Step 15: Change the WPS to Disable and Click on Apply Changes
Step 16: The router will save the Information and bring back to the same page
Step 17: On your left hand side,click on Security.
You can select any security type, the belkin routers have 2 types,they are
A) WEP(64-bit WEP)
B) WPA
C) Disabled
A) WEP (64-bit WEP):
If you are selecting the Security type as WEP (64-bit WEP) then you will be able to see the Key 1 with 5 small boxes.You have to type 2 numbers in each box only in Key 1.
After you have typed please make a note of it and Click on Apply Changes.
B) WPA:
If you are selecting the Security type as WPA then you will be able to see the Preshared key or Password (PSK),in that box you can type as thing as you wish.
After you have typed the password please make a note of it and Click on Apply Changes
C) Disabled:
If you feel no need of any security for your Wireless Network you can select the option as Disabled and Click on Apply Changes
Step 18: After you have selected any one of the Option,now on your left hand side Click on Channel and SSID.
Step 19: Changed the SSID to any name as you wish
Step 20: Change the Wireless Channel to 6 or 1
Step 21: After you have changed please click on Apply Changes.
Step 22: Now we have configured the Router for both Wired and wireless Computers
To Check the wireless computers:
Step 1: Go to the wireless computer
Step 2: If it is a laptop turn on the wireless switch in the laptop
Step 3: Now Search for wireless Networks in the range,please see below according to your Operating System
WINDOWS XP:
Start---->Control Panel----->Network and Internet Connections(Network and Internet)---->Right Click Wireless Network Connection---->Click on View Avaliable Wireless Network
WINDOWS Vista:
Start---->Control Panel---->Network and Internet (Network and Sharing Center)---->On your left hand side click on Manage Wireless Networks------>Right Click on Wireless Network Connection----->Click on Connect
WINDOWS 7:
Start----->Control Panel---->Network and Internet (Network and Sharing Center)------->On your left hand side Click on Change Adapter Settings---->Right Click on Wireless Network Connection--->Click on Connect
Step 4: Now you will be able to see the Network name which you gave in the Router,try to connect to this it will ask for password type it and click on Connect.
You will be able to connect in wireless and you will be able to go online in wireless computers

Feb 13, 2010 | Computers & Internet

1 Answer

My internet connection fails as soon as I connect the cableS as described in the set up insructions. When I reconnect the modem to the PC directly then my internet connection is recovered. I cannot...


For Wired Computers:
Step 1: Connect the Modem to Router (in the port named Modem) and take another ethernet cable and connect one end to the Router(in the port named wired) and other end to any one of your computer
Step 2: Open the Internet explorer and type 192.168.2.1 and click on Enter in the keyboard
Step 3: Now you will be able to see the belkin router setup page
Step 4: On your left hand side click on Connection type,it will prompt for Login Password,leave it blank and click on Submit
Step 5: Now select the Connection type as "Dynamic" and Click on Next.
Step 6: In the next screen,leave the host name as Blank and Click on Apply Changes
Step 7: The Router will save the information and bring back to the router setup page
Step 8: Now,on your left hand side click on MAC Address or MAC Address Cloning.
(If it ask for any Login password,leave it blank and click on Submit)
Step 9: Click on Clone and Click on Apply Changes
Step 10: The router will save the information and bring back to the same page
Step 11: Now check the Internet Status on the top right hand corner,Check wither it says connected or not connected
If it says connected, then you can start to go online in the wired computers
If it says Not connected or no connection,then please follow the steps
Step 12: Unplug the power cable of both your modem and router,leave it for 10 secs,then put the power cable only on to the modem and wait until all the lights are lit up,then put the power cable back to the router and check wither u are able to see all the lights in the router.You will be able to see all the lights glowing and the Internet status:Connected.
You can start to go online in the wired computers
Wireless Computers:
Step 13: In the Belkin router Setup page,on your left hand side,if you have Wifi Protected Setup(WPS) Click on it.
Step 14: It will Promot you for a login password ,leave it blank and Click on Submit
Step 15: Change the WPS to Disable and Click on Apply Changes
Step 16: The router will save the Information and bring back to the same page
Step 17: On your left hand side,click on Security.
You can select any security type, the belkin routers have 2 types,they are
A) WEP(64-bit WEP)
B) WPA
C) Disabled
A) WEP (64-bit WEP):
If you are selecting the Security type as WEP (64-bit WEP) then you will be able to see the Key 1 with 5 small boxes.You have to type 2 numbers in each box only in Key 1.
After you have typed please make a note of it and Click on Apply Changes.
B) WPA:
If you are selecting the Security type as WPA then you will be able to see the Preshared key or Password (PSK),in that box you can type as thing as you wish.
After you have typed the password please make a note of it and Click on Apply Changes
C) Disabled:
If you feel no need of any security for your Wireless Network you can select the option as Disabled and Click on Apply Changes
Step 18: After you have selected any one of the Option,now on your left hand side Click on Channel and SSID.
Step 19: Changed the SSID to any name as you wish
Step 20: Change the Wireless Channel to 6 or 1
Step 21: After you have changed please click on Apply Changes.
Step 22: Now we have configured the Router for both Wired and wireless Computers
To Check the wireless computers:
Step 1: Go to the wireless computer
Step 2: If it is a laptop turn on the wireless switch in the laptop
Step 3: Now Search for wireless Networks in the range,please see below according to your Operating System
WINDOWS XP:
Start---->Control Panel----->Network and Internet Connections(Network and Internet)---->Right Click Wireless Network Connection---->Click on View Avaliable Wireless Network
WINDOWS Vista:
Start---->Control Panel---->Network and Internet (Network and Sharing Center)---->On your left hand side click on Manage Wireless Networks------>Right Click on Wireless Network Connection----->Click on Connect
WINDOWS 7:
Start----->Control Panel---->Network and Internet (Network and Sharing Center)------->On your left hand side Click on Change Adapter Settings---->Right Click on Wireless Network Connection--->Click on Connect
Step 4: Now you will be able to see the Network name which you gave in the Router,try to connect to this it will ask for password type it and click on Connect.
You will be able to connect in wireless and you will be able to go online in wireless computers

Feb 12, 2010 | Belkin (F5D7230-4) Router (587009)

2 Answers

Network wont show up on any Wireless Network List


Reset your router to factory defaults.
For that press RESET button for 10 seconds it is in back panel of router.
hen connect your router to computer with ethernet cable.
Then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.
Set WAN settings as your internet service provider settings.
Enable DHCP .
Click on wireless and enable wi fi.
If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.

Then save settings and restart router.

Let me know if you need further assistance.
Thanks.

Nov 10, 2009 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
D-Link DSL-G604T Wireless Router Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...