Question about Whirlpool Kitchen Appliances - Others

Open Question

I have an ikea wirlpool microwave oven model IMH16XVQ-2. the light underneath over (that lights stove below) went out. I tried to get bulb out and i did however the metal base of the bulb is stuck. also i went to hardware store and can't find matching bulb. help

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MicrowaveSvc
  • 9047 Answers

SOURCE: light bulb replacement for sanyo ems3553 microwave oven

If there's no obvious removable cover over the bulb (most often on the rear or side) and the owner's manual doesn't address it, then disassembly will be required.

You'll need to remove the outer cover (wrapper) to get to the bulb.

Always unplug a microwave before removing or installing any bulbs.

If it's an over the range type, remove the vent grille across the top and see if bulbs can be accessed there. There may be a panel on the bottom covering the light(s), instead.

If not, chances are you'll have to remove it from the wall, then remove the outer cover. If so, the installation instructions are very handy, and it's best to have two people since the microwave can be heavy and awkward.

If you don't have your instructions, please reply back with your brand and model number.

Once it's out of the wall, the outer cover (wrapper) will need to be removed, just as you'll need to do on a counter top model.

On a counter top model, be sure it's unplugged, but otherwise ignore the instructions above this paragraph.

You'll need to remove the outer cover (wrapper) to get to the bulb.

See these links before proceeding:
http://www.microwavedisplay.com/safety.txt
http://www.microwavedisplay.com/disassembly.txt

The screws you need to remove should be pretty obvious, but a special driver (such as a T20H type or GTXH20-100) may be needed.

Be sure to put all the screws back in the right holes, since some may be special grounding screws.

Bulbs can be had locally in most grocery stores, hardware stores, home improvement centers, and big box or department stores.

Many models use halogen lamps. You must not touch the new one with your bare skin, as the oils will shorten the bulb life.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Mar 06, 2009

  • 10 Answers

SOURCE: oven light bulb stuck in socket

You can use a potato (no kidding). Try to press firmly with a potato into the light socket and turn.

Posted on Mar 21, 2009

MicrowaveSvc
  • 9047 Answers

SOURCE: whirlpool microwave model #MH1140XMQ-1. I needed

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week or so.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Or if you prefer, you can order a new control circuit board for it here for $140.10 plus shipping. (Just enter the model number as MH1140XMQ-1 without the dash).

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or no bright, too. Sometimes this will similarly affect the exhaust fan operation or inside light, too.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

2812698.jpg

Posted on Jul 05, 2009

MicrowaveSvc
  • 9047 Answers

SOURCE: My EWave above the stove microwave, light bulbs

Normally they would unscrew. First, always be sure to unplug the power before installing or removing bulbs.

They may be tacked in with some hot glue.

Posted on Jul 11, 2010

blueextc3221
  • 15935 Answers

SOURCE: Kenmore gas stove model 790.75752 the oven will

It appears your Gas Valve/solenoid/thermocouple has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.





Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Oct 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix stove top lights?


Find the manual online by going to Google and put in the make and model of your stove. It's usually found on the inside of the door. In the manual it will tell you how to replace the lights (bulbs).

Oct 12, 2014 | Whirlpool MH6130XEB/Q Microwave Oven

1 Answer

FGMV205K cover removal


Good Afternoon Friend,

I understand that you want to know how to remove the cover on your Frigidaire microwave, model# FGMV205K. There are two different covers that you are able to remove for access to two different light bulbs.

If you are trying to change the Microwave Oven Light for inside your microwave:

    1)To replace light bulb, first disconnect power to your microwave oven at the circuit breaker panel or by unplugging it.

    2)Remove the louver by removing the three Hood Louver Screws.

    3)Push in the upper tabs and pull the louver away from your appliance.

    4)Remove the light bulb and replace with a new 20 watt light bulb. DO NOT USE BULB LARGER THAN 20 WATTS.

    5)Close the Oven Light Cover by carefully pushing into place. Push the louver back into place (engaging both the bottom and top tabs) and change to hood Louver Screws.


    If you are trying to change the light bulbs underneath your Microwave:

      1)To replace light bulbs, first disconnect power to your microwave oven at the circuit breaker panel or by unplugging it.

      2)To open Light Cover, remove the screw on the light cover.

      3)Replace the light bulbs with new 20 watt light bulbs. DO NOT USE BULBS LARGER THAN 20 WATTS.

      4)Close the Light Cover and secure with screw removed at step 2.

      If further troubleshooting is needed, I ask that you please let me know the error codes displayed on your appliance. Hope this is helpful.

      -Best Regards-
      WP

Jun 07, 2014 | Frigidaire Gallery FGMV205K 2.0 cu. ft....

1 Answer

What model light bulb do i buy to replace the stove light underneath my Electrolux microwave? It's model: ei30bm55hsb. I've tried 2 from Ace


Hello,

The OEM part number for that light bulb is 5304464198 it could be ordered from your local appliance parts store or online at;
searspartsdirect.com
apdepot.com
partselect.com
apwanger.com
repairclinic.com

GENE

Aug 30, 2011 | Electrolux Kitchen Ranges

1 Answer

Although I have changed the light bulbs, the lights that illuminate under the microwave onto the stove top will not work. This is a Kenmore over the stove Microwave Oven Model 721.80592402. Have their...


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid with a one-year guarantee.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.

Sep 08, 2010 | Kenmore 80599 Microwave Oven

1 Answer

I have a roper mounted microwave above my stove. i just need to know what kind of bulb goes underneath it.


Since you obviously intend replacing the bulb yourself (good for you!) you should first remove the old bulb and that will make it easier to find a new one. Chances are, its a common bulb, readily available wherever light bulbs are sold. Or, at the very least, a hardware store like Tru-Value or Home Base.

Feb 03, 2010 | Roper MHE14XKB Microwave Oven

1 Answer

Bulbs UNDER the microwave burned out; new bulbs don't work


i know this is going to make no sense . but in my samsung service cd it is in BOLD PRINT YOU MUST DISCONECT POWER BEFORE REPLACEING BULBS , OR DAMAGE TO TIMER WILL RESULT ! the first time you changed them did you disconect power ? if not , your board might be toast , $$$$$$$$$

Jan 24, 2009 | Samsung SMH7174BC Microwave Oven

1 Answer

Light bracket in over the stove ge microwave XL


You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 06, 2008 | GE JVM1630 Microwave Oven

1 Answer

Need GE Spacemaker parts..


SEE http://tinyurl.com/gv383

We're happy to help and we appreciate your thoughtful rating of our answer.

Jun 20, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Appliances - Others Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

richie46

Level 3 Expert

12505 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Whirlpool Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...