Question about Samsung TL 105 Digital Camera

1 Answer

Will not stay on.. turns on and then beeps once and turns off.. the battery is fully charged

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 125 Answers

Welcome to FixYa.

There are three reasons why your camera power ceases while in use.

* The Battery is exhausted
- insert a charged battery or recharged the battery
* The camera is turned off automatically
- turn on the camera power again
* Operation has ceased in a low temperature outside of the camera usage temperature range
- make sure the camera and battery warm by placing them in your pocket, etc. and then immediately before shooting,place the battery in the camera and then shoot.

In your case, posible will be the 3rd reason. If you still having the same issue after doing the troubleshooting. I also suggest to removed and re-insert the battery and try to switch it on again.

If this option wont work, you have to contact your service center.

I will be more happy to know if my solution will help you or not on your issues on your camera.
Feel free to reply on this for any question or comments.

Thank you for using FixYa.

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are these 2 blinking lights on my irobot roomba?


"The Charge Indicator Light is located immediately to the right of the power button on Roomba Red and Roomba (sage). On Roomba Discovery and Discovery SE, the Charge Indicator Light is incorporated into the power button. Please refer to the table below to determine what the Charge Indicator Light is telling you.

* Pulsing Amber - Charging
* Green - Fully Charged
* Amber - Partially Discharged
* Red - Almost Fully Discharged
* Flashing Red - Fully Discharged"
At the end of a cleaning mission, Roomba will tell you if it has successfully completed it's mission or not:

GREEN = MISSION COMPLETE

YELLOW = MISSION ABANDONED (Check robot's brushes, etc.)

YELLOW RED POWER BUTTON = BATTERY DEPLETED (Scheduler Models)

RED YELLOW POWER BUTTON = BATTERY DEPLETED (Discovery Models)
number of beeps after ?uh-oh? :

No beeps: A wheel is stuck or is not touching the ground. Pick up the robot, place it down securely on the floor and touch the clean button to restart the cycle.

1 beep: The main brushes cannot turn. Turn over Roomba and remove the brush guard by pushing the two yellow tabs. Remove the brushes, clear any obstructions, and replace them again.

2 beeps: The side brush cannot turn. Turn over Roomba. Look to see if something is wrapped around the side brush. Remove the side brush with a screw driver and check for string or hair that may be wrapped around it.

3 beeps: The vacuum cannot run Remove and empty Roomba?s bin.

4 beeps: A wheel motor cannot run Your Roomba may be stuck or something may be wrapped around a wheel. Look for something wrapped around the wheels. Push them in and out and make sure they turn easily.

5 beeps: The cliff sensors have failed or are blocked. Turn over Roomba and clear any debris that might be caught underneath the front bumper in the cliff sensors. You can also use compressed air to clean them out.

6 beeps: Wheel obstruction or robot attempting to drive over an obstacle. Turn over Roomba and remove any obstructions that prevent the wheels from seating all the way up into Roomba?s body. Also, remove any obstacles that Roomba could drive over.

7 or 8 beeps: Not applicable Roomba?s beep codes do not include 7 or 8 beeps. If you are getting an error with 7 or 8 beeps, try counting again or contact iRobot Customer Care.

9 beeps: Sensor error Please contact iRobot Customer Care.

10 beeps: Roomba is stuck Pick up Roomba and start it again somewhere else. Use a virtual wall or other barrier to keep Roomba away from the
place it got stuck.

Your Roomba may be experiencing an issue where the battery is deeply discharged and may need to charge longer than the standard 3 hours. (or 7 hours if you have a standard charger)

Even with the charging light showing green (this indicates a fully charged battery) the robot is still charging. If your Roomba exhibits behavior where it charges for a short time then runs for a short time you will need to do the following.

1. Plug the charger into Roomba (if you have a home base be sure to plug directly into Roomba instead of using the home base, this will ensure the robot's charging cycle is not interrupted.)

2. After the Roomba's charging indicator goes to solid green please keep the Roomba on the charger for an additional 72 hours. (3 days)

3. After the 72 hours (3 days) has passed, turn your Roomba on and begin a normal cleaning cycle. If this works successfully it may take several uses for the battery to get back up to the performance it once had.

If this does not correct the problem, please call customer support at 877-855-8593

Nov 22, 2012 | Vacuums

1 Answer

Gogo elitescooter lights indicate battery fully charged but scooter will not go


Make sure the free-wheel lever is engaged and the charger is unplugged from the scooter before you try to turn the scooter on. If the battery gauge goes up when you turn the scooter on and there are no beeping sounds you should be good to go.If the battery gauge drops to the red when you try to accelerate slowly, your batteries are shot. (Typical replacement in 24-48 months).If there is any beeping when the key is first turned on then there is a problem and the number of beeps indicates the problem found by the computer during the POST. [Power On Self Test]

Dec 26, 2011 | Electric Mobility Mobility Electric Power...

1 Answer

MYFI XM2GO WILL NOT TURN ON. ALSO WHEN I PUT IN CRADLE WILL NOT SHOW CHARGING


I had the same problem. This procedure from the "Technical Questions" section of http://shopdelphi.com/consumers/support/faqs/myfi/ worked for me:
"My MyFi won't power up, how do I reset it?
To reset your MyFi, start by turning the receiver off and removing it from its (car, home, audio system) cradle. Then remove the back cover and battery. Using a small paperclip, press the reset button located on the top left corner of the battery compartment. Now plug the AC power adapter into a wall outlet and plug the power port directly into the bottom of the MyFi (battery stays removed). Wait 10 seconds and listen for a beep. After you hear the beep the message "insert battery" will appear. Cycle the MyFi to ensure it powers up and powers down. If the power cycle is normal, then turn off the MyFi, unplug the power adapter, and reinstall the battery. Re-plug the AC power adapter directly into the bottom of the MyFi. Wait 10 seconds and listen for a beep. After the beep you will see the message "battery charging". Leave the MyFi plugged in until it's fully charged. You will see the message "charging complete" displayed. After the MyFi is fully charged, turn it on and reset to the factory defaults. Unplug the MyFi from the AC power adapter and using the battery power leave it on until it fully discharges (approximately 2-5 hours). Plug the MyFi in using the AC power adapter to recharge the unit and resume normal use. If you need help at any point during this process contact us at 1-877-463-3574 for technical support."

I hope it works for you too.

Sep 27, 2010 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

Battery is fully charged checked with meter. once started low battery beep continues although it is fully charged is their an electric problem?


Sorry to say, yes, anything with a kid trax or safety 1st battery has a problem. Go to www.cammhsm.com and you can find some help. I know, I have one.

Jun 10, 2010 | Electric Kid Trax C6 Corvette Ride On

2 Answers

The lens is stuck open and nothing will work. Every time I try to turn it on or push a button it beeps and turns off.


First, make sure you have a charged battery. Once you have that, try turning it on, and gently press on the lens to try to help it reseat. You might try googling the problem, there are free suggestions to try before you take it to a repair facility. But if you do decide to have a shop fix it, get an estimate first. Oftentimes, the repair is about what you will pay for a good, used camera on Ebay.

Feb 22, 2010 | Samsung Digimax D53 Digital Camera

1 Answer

Craftsman power drill - batteries wont recharge. When I insert dead batteries into the charger The green light ''Fully charged'' comes on and stays on. The batteries do not charge as when they are inserted...


the battery's are most likely dead, (like the real dead) after many uses of rechargeable battery's they slow stop holding charge at all, make sure when you get a new rechargeable battery you fully charge it once and fully discharge it once this will increase batterys life time

Sep 27, 2009 | Drills

1 Answer

Battery charged, however camera will not stay on


This is a firmware problem that is very common in newer electronical devices especially cameras. You may get lucky enough to find an upgrade program online, but most chances are that you will have to send the camera in to the manufacture and they will repair it for $50

Aug 05, 2009 | Casio Exilim EX-S880 Digital Camera

1 Answer

Battery will not stay charged after being fully charged


Hi,

How old is the battery?
These happen when battery becomes weak/faulty.

If the battery is new, ask for replacement.
If old, time to get new.

Thanks

May 30, 2009 | Kodak EasyShare M1033 Digital Camera

Not finding what you are looking for?
Samsung TL 105 Digital Camera Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5096 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...