Question about Watches
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: my watch needs a new battery.
There is a tool that you need that adjusts to the three holes or openings in the back of your watch and it just screws off. If you don't have access to the tool, simply take two push pins and CAREFULLY insert them into the openings and unscrew the back cover. Remember that it unscrews counter-clockwise.This will give you access to the battery simply take it out and go to the store to buy a replacement repeat the process to install the cover back on.
Posted on Nov 28, 2008
Unfortunately there is no way to get the link(s) for your Cartier watch without getting in touch with Cartier.
Everything you need you can find here:
Cartier is very aware about their products and you will be asked to bring in or send in your watch with supplied documents(proof of purchase etc.).
In case if you do not have the proof of purchase you will be asked too many questions(when you bought it, from who, for how much, etc.) and this can lead even to police investigation as quite many of Cartier made items are stolen(not abuse to you, of course).
So, if you do not have any original papers with your watch, the best solution is to find your nearest watch repair shop and ask for help.
Decent watchmaker allways can find out how to help.
Hope this helps a lot.
Don't forget to rate, please.
Posted on Jan 10, 2009
Usually you would need a watchmakers press for closing the watch back. Without proper tools it is quite difficult, but you can try the following. Take a leather belt and lay it flush on an even, solid surface (stable table will do). Undo the strap (both ends) from watch case by pushing spring bars inwards with pen knife. Lay the watch crystal face down on the leather belt. Belt must be wider than watch itself and the leather must be quite hard and even, not soft. Find the small groove on watch case back and align it very carefully to the watch's winding stem, so, the stem goes directly in the middle in protrusion. Slightly push the case back into the watch case at that groove point and gradually apply pressure with fingers going all way around the case back. Use your body weight if needed. You should hear "click" sound when the case back jumps in to place. If this does not work, there is no other way, but to go and see watchmaker. Hope it will work for you.
Posted on Feb 27, 2011
Tips for a great answer:
Jan 10, 2016 | Generic Ladies TFX Stainless Steel Watch...
Mar 17, 2011 | Gucci 2305 2305.22345 Wrist Watch for...
Aug 26, 2010 | Armitron Blue Dial Stainless Steel Watch...
Jun 18, 2010 | Tag Heuer 2000 Classic WK1113.BA0311 Wrist...
May 17, 2010 | Gucci 21540 wristwatch
65 people viewed this question
Usually answered in minutes!