Question about Westinghouse Televison & Video

1 Answer

I have a Westinghouse flat screen about 1 yr old when I turn it on the "W" insignia comes up very clear, the channel comes on clear for about a second and then everything turns black and no volume either

Posted by on

  • gapetta_seba Apr 09, 2011

    Sorry for the delay I had to get someone to help me find the model number it is SK32H240S

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Westinghouse Master
  • 74,211 Answers

Hello
Please give me the model number of your Westinghouse flat TV. That will help me very much to detect the fault of your TV. Send it to me by Fixya. OK.

Posted on Apr 05, 2011

  • The Knight
    The Knight Apr 09, 2011

    Hello
    Your Westinghouse SK32H240S have video card trouble. It is not a user repairable section, as the user must have sound knoledge in both digital and analogue electroncis. This set uses both the technology; digital and analogue. Moreover the componets on that section cannot be replaced by ordinary desoldering and soldering methods, as it is assembled with CNC [Computer Numerical Controlled] machines, pressfit technology. Your set does not show a screen even for five minutes. If so we may have use the Factory Default function to know whether it help us.
    As soon as video signal comes to the respective secton for processing, the system control IC in your set detects a fatal error, which prevents from furhter processing, and thus goes to protection mode. This is actually happening now to your set. As the fault prvails for just seconds, it is very difficut to detect for an experienced service technician too. Moreover, to repair this sectoon, one must have sophisticated testing equipments, like oscilloscopes, digital multimeter, colour analyser, frequency counter and so on. Without proper testing equpments, trying to repair this section is dangerous, and will cause more components to be get fault. So if you have confidence and have atleast a high quality digital multimeter, DC soldering iron wich ceramic bit, a very steady hand for soldering and more patience to do this work, inform me by Fixya. I'm happy to assist you. OK.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset my westinghouse flat screen tv


if you are using an antenna for digital channels,it will search for 100 to 125 channels,if searching for the old analog channels,it only searches for 75 channels,but,you will not receive them,they are gone now,if you have a cable box,then you only need channel 3 or 4,

May 18, 2015 | Westinghouse SK-32H540S 32 in. LCD TV

1 Answer

I have a Insignia NSL37Q10A, when you turn it on it display's


Change input device to some other like a DVD player. Look for loose contacts in RC jack, cable, sockets. Look for any jammed buttons on TV or on remote.

Switch off TV, switch off power, remove plug and wait for 48 hours and retry.
If problem persists, call in a qualified service technician.

Aug 03, 2012 | Insignia NS-L37Q-10A 37 in. HD-Ready LCD...

1 Answer

About 8 months ago, every time I turned on the TV (SK-26H590D), only vertical lines would appears... almost like watercolor: green, orange, etc. However, you could hear the channels and change them as...


Hello
Get into Menu Operations and come to the window video reset. You can get this in its manual section [1-6]. Reset all video sub menu items to factory reset. Check out after this reset process whether the problem solves or not. If not its video card has some trouble. Contact
www.westinghousedigital.com and enquire them about the nearest westinghouse Authorised Service center of theirs to you. Thy only can set it right. OK.

May 08, 2011 | Westinghouse SK-26H590D Television

1 Answer

Hi there. I'm getting a "Please run channel auto scan" message on my Insignia flat screen. Please advise.


I am assuming this is your first digital television. Unlike the old analog television digital televisions
must have the channels scanned into the set. This what you have to do.
> Connect the signal source to the back. Antenna/Cable/Satellite.
(You may have already done the above step.)
> Go into the menu for the signal input source and set it to what was set on the back of the set.
> Click on scan or channel or whatever it's called and wait for it to search for available channels.
> Save the channels found.
You may exit menu and watch television.

The owner's manual gives this and more information.

Feb 16, 2011 | Insignia LCDTV26 26 in. Television

1 Answer

I have a Westinghouse 32"


These TVs are notorious for backlight inverter problem. You could look for a complete backlight board(this will be easier if you're not a tech), or you can replace the transformer and transistor(transistor doesn't always go - sometimes you get lucky). The transformer that is bad will have a small burn mark in it where one of the legs comes up from the board. If I was you I would just replace the board since it's easier. I have done about a half dozen of these. Joe

Nov 12, 2010 | Westinghouse Televison & Video

1 Answer

Locking Controls of Insignia 40'' LCD TV


Alas, I have been through this with my children and unfortunately outside of a Parental Channel lock, I have not heard of a vendor who has created the capability of locking the set controls. It's just the unfortunate case that the controls are accessible to the child (I have another TV where they are on top and even my 9 yr old can't reach them - ha ha).Sorry my friend.

Jul 24, 2010 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

My insignia flat screen has turned colors and bad focus. Almost like tartan plaid on top of the screen. Not an input issue, happens on all inputs


try to see if not the input but the setup on like 720p 1080i 1080p sometimes u can change the setup and it resets that happened to my westinghouse 37in

Dec 11, 2009 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

JVC i art 32" flat screen


Does anyone know where can I buy a screen for a 27" LCD Insignia TV. Model is NS-27LCD? My screen creaked. I checked out e-bay and have not found a broken TV with a good screen. Does anyone know where I can buy a screen at. 
Thank you all for you time. 
JC 

Jul 22, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74198 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...