My sony mp3 nwz-b135f does not open. when i'm attach it to computer, also does not display anything. please answer my question how to solve it....please!!

Hello
Try this link.
esupport.sony.com/US/perl/model-find.pl?mdl=NWZ-B135F...

Please try these steps:
1. Connect the player to the computer.
2. From the computer, select start - Control Panel - Performance and Maintenance - System. "System Properties" is displayed.
3. Select Hardware tab, and open Device manager.
4. Open Universal Serial Bus controllers, and select USB Mass Storage Device or WALKMAN NWZ-XXXXX.
5. Select Action - Update Driver ... from the menu bar. "Welcome to the Hardware Update Wizard" is displayed.
6. A dialog on Windows Update connection will be displayed. Select No, not this time., followed by Next.
7. Select Install from a list or specific location [Advanced], followed by Next for the hardware install method.
8. Select Don't search. I will choose the driver to install., followed by Next for the search and install option.
9. Check Show compatible hardware, and then select MTP Device* in the model list, followed by Next. The device driver is installed.
10. "Completing the Hardware Update Wizard" message is displayed, and confirm "MTP Device" message. Click Finish.
Thanks.
gylacz

sony digital music player nwz-b135f boot error

Yessss!!!!!!!!! I have the exact same problem!!!!!!!! plaeseeeeee someone reply and solve this!!!!!! pleaseeeeeeeeee!!!!! I'm begging!!!!!!!

firmware is corrupted reinstall firmware from sony site

the battery is down u must replace it.it ain't easy for u to do it,because a mistake can destroy her player
contact customer service

if u have a installer CD with the device then
please install the driver then plug your device
in the connectivity cable.thanks

Hi ikjensen,
You can try forcibly resetting it. Don't worry, you'll not lose any data. There should be a pin sized hole somewhere on the back.( To find out where, please visit this site for the manual for your model.
http://www.sony.co.in/support/product/nwz-b135f/modelfirst). Push a pin into the hole, and the player should be resetted. Common hang ups can be solved this way, but if the problem persists, try formatting the player.

• In mac open Disk Utility
  
• Select the volume named WALKMAN
  
• Hit UNMOUNT
  
• Disconnect the player
  

The trouble is that the player doesn't respond to the comand EJECT in this process a loop started unmounting and seconds later mounting the volume again.
Hope this helps

MTP problem SOLVED!!!!! Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} I have a Sony MP3 Player(NWZ-B135F). when i inserted it to my pc's USB port(which is working fine), win XP (SP 3) prompted "Found New hardware" wizard. I followed the steps and finally I reached to a step where it shows “MTP device Problem......” I tried many times with different USB ports, but the same problem happened.


Fully frustrated, I finally did what the whole world does, GOOGLE my problem. Google showed me a lot of posts but nothing could solve my problem. Microsoft was providing the MTP driver, but only after a lot of authentication and procedure, which I was not going to follow….

After repeatedly experimenting by inserting my MP3 player, I got the solution!! It is as follows:



1) Insert your music player in the USB port. You will get a Hardware Installation wizard by XP.
2) Select, “No, Not this time” and click next.

3) Select “Install from a list or specific location (Advanced)”.



4) Select “Don’t search. I will search the driver to install”.



5) Select “USB Mass Storage Device” and then click "Next"



7) Wow!! Now you are done!!!

Enjoy and listen to your favorite music!!