Question about LG MG64 VHS VCR

1 Answer

I got an LG VCR GC980NW (MG 64) VHS VCR. I've wrongly pressed both the eject and play forward button at the same time. After that, the VCR shows both the 'EJECT' message and 'No Tape' signal, and then automatically stops. I switch on the machine again, but the problem repeats. How can I reset the machine? Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • LG Master
  • 17,129 Answers

It is possible that the mechanism is out of mode as the front cassette loading mechanism and the tape forward loading mechanism have gone out of sync. Now it is important that the MODE of the system control is in the correct parking.
Hence I feel that the VCR must be opened and the mechanism reset-ted. Make sure that the tape loading has come back to the correct parking and also the cassette loading has returned, other wise remove the mechanism and reset.

Posted on Apr 05, 2011

  • abcdef240 Aug 06, 2011

    I did not know how to remove the mechanism and reset. Would you please tell me how to do this? Thanks.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHEN INSERT THE VHS TAPE TO VCR IT EJECTS BACK... WHAT MAY BE THE PROBLEM?


Hi, depending on the age, chances r that some components r worn out or the eye sensor needs cleaning or sdjusting.....

Jun 21, 2014 | Panasonic Televison & Video

1 Answer

VHS tape is running at high speed when insert it to VCR. no playback..buttons doesnot work.


Check if the fast forward button is more inside than the rest of the buttons. May be its stuck in the ff position. After all they were just micro switches below the plastic buttons strip. The specific ff micro switch may be stuck, if I were you I would try some switch cleaning spray to loosen it. But be prepared that the control ic is busted.

Jun 21, 2014 | Panasonic Televison & Video

1 Answer

I have a Panasonic VCR (DMR-ES35V) and when you insert the tape, it does not thread the tape across the video head. The tape runs for a moment and then ejects.


There's either damage in the drive section, or more likely and in some cases "plus" the Mode Switch is set in the wrong position or is faulty. The mode switch tells the electronics what position the VCR mechanism is in. Such as play or fast-forward. If in the wrong place it will carry out other functions - such as eject - in your case.

Sep 27, 2013 | Panasonic PV-V4022 VHS VCR

1 Answer

Our Toshiba VCR won't play tape. It ejects tape after a few seconds.


If you are trying to play older VHS tapes, you may have to run them through some fast forward-rewind cycles to condition them and relieve stress

Jul 20, 2013 | Toshiba D-VR4 DVD Recorder/VCR

1 Answer

Nv-hv60 panasonic gone dead


Its dead...what can't you understand here?

Feb 02, 2013 | Panasonic NV-HV60EB VHS VCR

1 Answer

LG280W VCR safe mode


hold the power button down for a few seconds or press stop

Jul 23, 2010 | LG MG64 VHS VCR

1 Answer

After I fast forward and press play the tape ejects


try pushing stop in between fast forward and play.

Mar 31, 2010 | JVC HR-VP673 VHS VCR

1 Answer

Vhs eject will not release tape.


I had a suggestion that did work. Reach into the VHS compartment with left hand and press down toward the back of the tape. With the right hand press the eject button a few times and the tape did come out. I would not buy a Samsung product again. No help from their 800 tech support. No more playing the VHS side of the player. Lynn

Jul 12, 2008 | Samsung DVD-V8600 DVD Player/VCR

1 Answer

Lg v181 combo problem with vcr keeps ejecting tapes when I want to record.


The tape load carriage is defective or there is something in the way inside the machine....accordianman

Feb 21, 2008 | LG V181 DVD Player/VCR

1 Answer

DVD/VHS Selection


turn of the power on wall, and wait 5 mins, then try again. i had same trouble with not being able to eject or play dvd, i turned off player at wall and it worked fine again.

Sep 25, 2007 | LG V181 DVD Player/VCR

Not finding what you are looking for?
LG MG64 VHS VCR Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...