Question about Televison & Video

1 Answer

Plug dvd into power and get no display or anything from unit

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,238 Answers

Good day sir
your DVD got trouble in the power supply that gives a power to any kind of electronic devices or appliances.. to fix that problem I give you step by step and simple trouble shooting for power supply.
first,open the cover of the unit by removing all screws that fix the cover
secondly,if you have a tester check the continuity of you ac cord or power cord..then if it is good look for any leak/bulging top capacitor
thirdly,check the fuse if busted.....replace it only with the same type and ratings
fourthly,after you replace the fuse if have to check also the power transistor or what we call is the one with heat sink on the body..if it is shorted replace it with the same part number and do not use imitation..
and finally if you got all of that try to power it on again and measure the voltage output if there's a 5vdc and 12vdc

thank you and good luck

Posted on Apr 05, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Unit will not start

Sounds like my woman.  The thing is looking for a signal.  Hook the TV or stereo receiver up to it or put a DVD in the tray.  Some DVD players take a bit to power on so you might just be an impatient lot.  Take the thing back to the shop and exchange for a different brand like Sony or Samsung which power up quicker and are more user friendly.

Oct 29, 2009 | Panasonic DMR-E85H DVD Recorder

1 Answer

DVD won't work displayed SLF CHECK, now displaying U99

U99 ≥The unit fails to operate properly. Press [POWER í/I] on the main unit to switch the unit to
standby. Now press [POWER í/I] on the main unit again to turn the unit on.

Let me know if it is still not operating. there was a power failure and that has caused the U99 code.

You can access the manual by clicking the link i have provided below.


the second manual download link is the true English version and the first download link is the alternate language manual..

May 20, 2009 | Panasonic Televison & Video

1 Answer

Unit will not come on.

check the voltage of power supply,and the voltage to board, if has no reading in board maybe the regulator on power supply is not working

May 05, 2009 | RCA DRC8320 DVD Recorder/VCR

1 Answer

Dmr ez475v

Check the fuse in the plug, if not, seeing as its new i would take it back to the shop for a replacement, NOT a repair.

Sep 19, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Panasonic dmr e85h not starting up

There is a great thread over at After Dawn on the E85H. I would post there.

Feb 14, 2008 | Televison & Video

1 Answer

No display

it is a bad fuse or the i.c. chip is bad

Jan 02, 2008 | Sony STR-GA8ES Receiver

1 Answer

Toshiba d-r2

If it's 7071, shut the unit off by holding the power button until the time is displayed (instead of the error code). Unplug the unit. When you open the case, you will see a white plastic piece at the front of the dvd drive near the silver plastic hinge on the face of the unit's dvd opening. The white plastic piece slips in the groove of the hinge to stop the units dvd door from being opened while the drive is engaged. Push the white plastic piece in toward the dvd drive; sometimes the mechanism gets sticky. Plug the unit back in and press the power button. This may solve the problem Hope this helps.

Aug 06, 2007 | Toshiba D-R2 DVD Recorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides