Question about Intel D945GCCR Motherboard

1 Answer

Dear sir SUB: my mother board problem (D945) whenever switch on the cpu its immediatly turn off. Thanks & Regards, Y.Shyam raj.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Intel Master
  • 27,725 Answers

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they are probably old and faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error

hope this helps

Posted on Apr 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dear sir, whenever the switch on the CPU its immediatly (With in 2 seconds)turn off, Power supply ok but CPU not booting. Thanks & Regards, shyam raj.


Hi Check that the power button is not stuck on or that the reset button is not stuck on as this will cause the machine to shut back down instantly i hope this helps

Andrew A

Apr 07, 2011 | ASUS Pentium 4 , Pentium 4, Pentium D,...

1 Answer

Will my motherboard handle ddr2 ram and if so how much?


Dear sir,

Board has DDR1 slot which is entirely different from DDR 2 slot , it will not support , you can find DDR1 ram for ur board from supplier of used/ obslete PC parts .

Regards
Raj

Feb 10, 2011 | Foxconn WinFast K7S741MG Motherboard for...

1 Answer

No video from motherboard even with new video card


Dear sir,

if this board has AGP slot, try to use AGP card inspite of PCI display card .. second thing when u power up the board . short its crystal oscillator for 2 second during switching on ..by screw drivers..if if it will not provide display .

then open fan & reinstall CPU .. if cpu is OK ( only can be tested on other board ) ..then something is wrong with Northbridge ../ or power supply mosfet of board if fan is not running ..

Regards
raj

Jan 26, 2011 | Asrock P4i65G Motherboard

1 Answer

Dear Sir, Ms, I need your support hope you help me i have one mother board hp logo intel D945 Pin less Processor 3G DD2 512 RAB but no display coming 1st time me on CPU green lite signal but after 5 sec...


hi my friend. i'm an iranian.
do as i say:
1- remove all the cables of your PC.
2- open the PC Case.
3- remove the Battery From yur Motherboard.
4- wait 15 minutes.
5- assemble the battery again and turn on your PC.

Jan 17, 2011 | Intel D945GNTLKR Motherboard

1 Answer

Monitor is taking too long to warm up and start working; up to 1 hours at times


DEAR SIR,

IF U HEAR BEEP SOUND WIYHIN FEW SECONDS OF SWITCING ON THE CPU , THAT MEANS MOTHER BOARD IS SENDING SYNC FOR MONTITOR . .. IF BEEP IS COMING LATE & MOTHERBOARD IS IVING SIGNAL BY LATE ENTER THE BIOS MODE & DISABLE ALL DEVICES WHICH ARE NOT INSTALLED, LIKE FDD, ETC SINCE BOARDS SEARCHES FOR COMPONENTS , SECOND THING ENABLE FAST BOOST , IT WIL SKIP ALL MOTHER BOARD TESTS

REGARDS
RAJ
NPCONLINE

Nov 06, 2010 | Computers & Internet

1 Answer

Hello sir my name is shyam


Hi Shyam,
You can download the required drivers from:
http://www.biostar-usa.com/mbdownloads.asp?model=U8668
Choose the audio drivers according to your PC operating system and download.
Hope this solves your problem. For more help and clarifications, please reply to this post. Thanks

Aug 29, 2009 | Computers & Internet

4 Answers

NEED INTEL CHENNAI SERVICE CENTRE ADDRESS?


Genune Chiplevel Service of Laptop And Desktop Mother Boards,Spares Contact: Multiware Info System, #163, North Usman Road, T.Nagar, Chennai-600017. CUstomer Support: 9841036469,9841602538,39.

Jan 16, 2009 | Intel Motherboard, 945GC, Core 2 Duo,...

2 Answers

845 mother board. ps2 keyboard connection are not working.


do not connect power led r remove if connected i had the same problem and this was the solution

Dec 21, 2008 | Intel D845HV (735858149143) Motherboard

4 Answers

Intel d845 gvfn display problem.


sir i have a problemmy mother board intell d845 epi/d845gvsr my mother board is cannot desplayed or display is not come but if i remove rame the mother board is give error beaps if i attach ram board is not displayed

Apr 25, 2008 | Intel D845GBV (BOXD845GBVL) Motherboard

Not finding what you are looking for?
Intel D945GCCR Motherboard Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...