Question about Mamiya C330 F Professional TLR Film Camera

1 Answer

My Mamiya C330 Pro only gives me 4 photos per roll

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

A few things to consider:
-Loading: Make sure you are not over loading the film before you start to shoot. I have sometimes turned the film advance too many times and end up cutting down on the amount of usable film.
-Are you loading the film in a dark area and careful to close up the back just after it has started to load to avoid exposing it?
-Shooting: Are you metering properly when shooting? Obviously underexposed images won't develop. You should consider a hand held meter.
-Shooting: Are you advancing the film more than it needs to be after you take your shot? Watch the film counter and feel for that click as it hits the next frame. I have advanced past the next shot many times by accident.
Hope that helps, Matt

Posted on Apr 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Film-advance warning won't go away on a RB67 Pro SD 120 film back?


Mamiya RB67 Pro SD that is new to me. loaded the film correctly took the first shot. But, the film won't advance. What am I doing wrong?

Feb 18, 2012 | Mamiya RB67 Pro SD Medium Format Camera

1 Answer

Hello. I just got a Mamiya C330, looks really nice but I note that the little release botton in front of the camera is inside I can;t take it out. my question is this could affect to take picture or I...


This button you speak of is an alternate way of depressing the shutter it is also a way in which you can use a shutter release cord to take pictures. the button itself is not meant to come out of the camera. Once you load your film or 2 empty film spools (to test to see if the camera is working properly) into the camera and wind the film crank then you will be able to depress that button and fire the shutter.

http://www.butkus.org/chinon/mamiya/mamiya_c330f_prof/mamiya_c330f_prof.htm

Aug 10, 2011 | Mamiya C330 F Professional TLR Film Camera

1 Answer

Mamiya 645 pro shutter doesn't fire


First thing that comes to mind on this camera is that it's a modular camera. This means the film back can be changed mid roll so there is what is called a Dark Slide between the film back and the body.

The dark slide needs to be removed before the camera will function. Also depending on how "new" the film back is there may be a dark slide holder/sleeve on the back side of the film back.

So you remove the dark slide and slide is into the holder so first you don't loose it and also it doesn't get bent.

Diagram
tri3mast_127.jpg

Jan 09, 2011 | Mamiya 645 Pro TL Medium Format Camera

1 Answer

I have an old mamiya that is corroded and rusted in some spots. It needs a good restoration service. Any recommendations?


I would recommend either:

http://www.keh.com/Repair-Center.aspx

I have personally purchased things from them in the past but never had them clean anything, these guys might be a little quicker and less expensive.
or

http://www.camerarepair.com/

I have personally used them on my c330f with good results.

Oct 25, 2010 | Mamiya C330 F Professional TLR Film Camera

2 Answers

My Mamiya RB67 triggers and shutter lease lever works but film advance lever doesn't move. Trigger button fired several times but film advance still showing 1.


This is not the best solution as it indicates a faulty film back. The film should advance without resorting to activating the film-wind release lever. That is only for intentionally advancing a partially exposed roll of film. Make sure the multi-exposure lever is not engaged and that the counter does advance and the red mark disappears as you advance to an unexposed frame.

Nov 09, 2009 | Mamiya RB67 Pro SD Medium Format Camera

1 Answer

C330 twin lens M.F camera


Here is a link to the user manual: Mamiya C330

Mar 26, 2008 | Photography

1 Answer

Mamiya 645 Super Replacement Parts


You can probably order direct from Mamiya, here is the contact info: Mamiya America

Mar 26, 2008 | Cameras

Not finding what you are looking for?
Mamiya C330 F Professional TLR Film Camera Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mamiya Photography Experts

kakima

Level 3 Expert

102366 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Mamiya Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...