Question about Kenmore 22642 Top Load Washer

1 Answer

Kenmore washer wont stop filling - Kenmore 22642 Top Load Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 43,501 Answers

Hi,
If you have a problem with your washeror dishwasher continuing to fillwith water after the valve has closed, then you this tip will help youunderstand why that is happening.

Here is a tip that will help you...

Washer orDishwasher Fills with Water when off
heatman101

Posted on Apr 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the reset button for a kenmore 80 washer wont stop filling water level


If this is a top loader then the vacuum line has come off of the dashpot or the water level switch is broken. UNPLUG the power-Standing in front of the washer, pry off the plastic trim strips on the left and right of the dash (control panel) Now you'll see a screw at the bottom where the strips mounted, remove ans KEEP the screws, now the dash will lift up and fold back, giving access to the parts.

Aug 17, 2014 | Kenmore series 80 Washer Motor 3363737-

1 Answer

Kenmore series 80 model 110 wont stop filling!


There is a clear plastic hose that runs from the load selection switch to the side of the washer drum. This hose connects the fill sensor to the load switch. without it being in good condition and connected properly the washer won,t get a signal that it's full.

May 09, 2013 | Kenmore Washing Machines

1 Answer

Washer wont agitate


if it wont agitate,then it's either your motor coupling,transmission,or capacitor

Feb 11, 2010 | Kenmore Washing Machines

1 Answer

Washer wont agitate or stop filling on any setting


Hello Friend, Just replace the water pressure/level switch. Replacement will make it fill correctly and agitate. Happy to help.

Nov 18, 2009 | Kenmore 24712 Top Load Washer

2 Answers

Washer stops after aggatating and wont drain


My Kenmore 70Series washer goes through the wash cycle then just stops when it is to drain and then spin.

Jun 10, 2009 | Whirlpool Washing Machines

2 Answers

Kenmore 90 Series Washer


You have a broken lid switch. Its # ll in the diagram. Part # is 3949238. Let me know if you need info on how to replace it, Dave www.washermd.com
02e81a1.png

Dec 17, 2008 | Kenmore 23822 Top Load Washer

1 Answer

Washer stopped in the middle of the cycle


sounds like motor if nothing stuck between tubs or in pump ,check these first if ok you have bad timer

Nov 12, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 70 series washer


to answer your first problem,

if it wont stop filling, then the pressure switch is either defective,
or the hose that is attached to the drum to the pressure switch was either pulled out or had an opening either it breaks or it cracks.

that would not transfer the filling mode to agitate mode.

the second problem that it wont drain and spin now is another issue but might be resolve if you solve the first problem.

tnx 4 using fixya,

drcool

Aug 30, 2008 | Kenmore 22422 Top Load Washer

1 Answer

My kenmore washer fills up but then just stops


it could be several things, something is lodged in pump, so the motor wont run, the motor is bad, or you have a bad transmission.

Start with the pump and see if it has sock or something stuck in it.

Jul 12, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 22642 Top Load Washer Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2290 Answers

fordexpert

Level 3 Expert

5537 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...