Question about Pride Mobility Products Health & Beauty

1 Answer

Our church has 2 Jazzy's one is blinking the code all lights flash 7 times the other 9 times all lights flash can not find what I need to do in our book. Can you help is there a web site I can get a print out of all the blinking codes the chair will give. thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 692 Answers

Mtp see the below list
The listed Flash codes are pretty standard and are applicable to powerchairs only not scooters:

1 flash User Fault (do not touch joystick) and turn back on

2 flashes Battery Fault Recharge batteries or replace

3 Left motor fault check connections or replace

4 Right motor fault check connections or replace

5 Left park brake fault check freewheel lever or brake connections

6 Right park brake fault check freewheel lever or brake connections

7 Remote fault check connections and wiring replace remote(joystick) (Check cable to the joystick unplug connector at rear of chair and plug back in then try turning on to see if you are getting same code)

8 Controller fault Check connections and wiring replace controller

9 Communication fault check cable replace (almost same problem as 7) try same fix if doesn't work joystick will have to be replaced

10 and 11 are unusual and will not be seen if at all Hope this helps you


Posted on Apr 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My chair is blinking 4 times and I do not have a manual


If it is a Pride Jazzy or similar, the Diagnostic Flash Codes are in this PDF file.

PDF]INFINFB2048_Jazzy_Select_14_Troubleshooting ... - Pride Mobility www.pridemobility.com/download.php?f=troubleshooting/INFINFB2048_Jazzy...
  1. Cached
  2. Similar
basic troubleshooting instructions for the Jazzy Select 14/14XL power chairs. ... on my Jazzy Select 14/14XL seem to be "dead" (controller does not light up when .... What if the left red battery condition meter LED on the VR2 or VSI is flashing? chair is blinking 4 times Google Search

Nov 15, 2016 | Health & Beauty

1 Answer

What does it mean when lights flash 9 times?


Look in your user manual in the trouble shooting section. I think its the solenoid brakes fault. Check the brake levers are in drive position or it can be the brakes need attention.

Error code for pilot plus see....
http://support.pgdt.com/Online-Diagnostics/Flash-Code-List/Pilot-Flash-Codes.aspx

Jun 10, 2015 | Pride Jazzy Select Elite

1 Answer

What does a jazzy 614 power chair 9 flashing wrenches need?


hi, that is the code for a brake fault , check the wiring to the brakes located on top of the motors...

Regards
Rob

www.gewizrepairs.co.uk

Jul 05, 2014 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

What does a flashing yellow light mean on the joystick? the light looks like the shape of a wrench.


Hi Judy,

According to Pride's troubleshooting documents the service indicator (wrench icon) will flash when a fault is detected by the dynamic controller.

The number of flashes, followed by a 2 second pause, indicates the issue. You will need to count the flashes to determine the cause and a possible solution.

I have typed the flash codes below, but you can also see them on a larger table here: http://www.fixya.com/support/p3641679-pride_jazzy_614_hd_jazzy_614hd/usermanual-6B42026-pdf

FLASH CODES
Code #1
  • Flash Code: One, pause, one
  • Cause: Possible Stall Timeout
  • Possible Solution: Turn joystick off, then on.



Code #2
  • Flash Code: Two, pause, two
  • Cause: Battery Fault
  • Possible Solution: Charge batteries, check battery connections and fuses.


Code #3
  • Flash Code:Three, pause, three
  • Cause: Left Motor Fault
  • Possible Solution: Make sure the left motor is plugged in.



Code #4
  • Flash Code: Four, pause, four
  • Cause: Right Motor Fault
  • Possible Solution: Make sure the right motor is plugged in.


Code #5
  • Flash Code: Five, pause, five
  • Cause: Left Park Brake Fault
  • Possible Solution: Make sure the left brake is not in freewheel mode.


Code #6
  • Flash Code: Six, pause, six
  • Cause: Right Park Brake Fault
  • Possible Solution: Make sure the right brake is not in freewheel mode.


Code #7
  • Flash Code: Seven, pause, seven
  • Cause: Joystick Fault
  • Possible Solution: Check the joystick connection.



Code #8
  • Flash Code: Eight, pause, eight
  • Cause: Power Module Fault
  • Possible Solution: Check connections to the power module and batteries.


Code #9
  • Flash Code: Nine, pause, nine 9
  • Cause: Controller Communication Fault
  • Possible Solution: Check bus connections from the joystick to the power module.


Code #10
  • Flash Code: Ten, pause, ten
  • Cause: Controller Fault
  • Possible Solution: Contact Technical Service for assistance.


Code #11
  • Flash Code: Eleven, pause, eleven
  • Cause: Incompatible Device Fault
  • Possible Solution: Contact Technical Service for assistance.


e88df88e-b25c-469a-914d-00d6964c87ad.png

Sep 05, 2013 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

Blinking yellow wrench light on pride jazzy 614 HD


Your version has a Dynamic Controls model controller and joystick.
Unplug the charger and engage the motor/brake lever so the chair is no longer in free-wheel mode (con't push by hand)
Turn the chair off, wait 5 seconds, turn the chair back.
If chair still does not run and your wrench is flashing you have a problem. Count the wrench flashes - the flash count indicates the error detected. 3, 4, 5, and 6 flashes indicate and error with the motors.
3=Left motor fault
4=Right motor fault
5=Left brake fault (may not be engaged)
6=Right brake fault (may not be engaged)
Any other fault code usually means the electronics or wiring is bad and not worth fixing.

Jan 06, 2013 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

I just replaced the batteries in my Jazzy 1170 PLUS. Now my speed control lights blink constantly and the chair is totally unresponsive.I have double checked to be sure the freewheel levers are totally...


According to my 1170 manual the flashing lights are error codes. 1 red = low batt., 2 red = left motor disconnected, 3 red = Left motor wiring fault, 4 yellow = Right motor disconnected, 5 yellow = right motor wiring fault, 6 yellow = Inhibit active, 7 yellow =possible joystick fault, 8 green = possible controller fault, 9 green = Solenoid brake fault, 10 green = high batt. voltage

Feb 13, 2011 | Pride Mobility Products Jazzy 1170 XL Plus

1 Answer

My jazzy select 14 on the controler near the joystick lights up what looks like a yellow wrench in a 9 flash. Lights 9 times stops then lights nine more times over and over . please help


well a wrench means the obvious that something needs adjusting , if it came with an instruction manual search for the code 9 blinks will mean.

Oct 16, 2010 | Pride Mobility Products Jazzy Select 14

2 Answers

My TV just turned off and the power light flashes 8 times. what is the flash code for 8 times on a panasonic TC-50PS14


thought I would post this here for everyone.

1 blink STV 5v sense DG Board

2 blinks 15v SOS D Board

3 blinks 3.3v SOS D Board

4 blinks Power SOS P Board

5 blinks 5v SOS D Board

6 blinks Driver SOS 1 SU / SD / SC Boards
(SC energy recovery circuit)

7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)

May 14, 2010 | Panasonic Televison & Video

2 Answers

Led with number 9 displayed is flashing


LED 9 flashing can mean many things. Here is the list of "flashing codes" for the vostro 1510.

Keep in mind a flashing led is going to blink 3 times. for example,

number one would look like this:

On (solid lit). Blink, blink,blink (paused off) blink, blink, blink... (paused off), (then repeat)


1. ON-FLASH-FLASH = No Ram or ram not seen
2. ON-FLASH-ON = Ram has a problem
3. FLASH-FLASH-FLASH = Motherboard failure (replace board)
4. FLASH-ON-ON = CPU Fault/failure
5. FLASH-ON-FLASH = LCD detect failure/fault
6. ON-ON-FLASH = MINI pci card (controller) failure/fault
7. FLASH-FLASH-OFF = Keyboard fault/failure
8. FLASH-OFF-FLASH = USB FAILURE
9. FLASH-FLASH-ON = Video BIOS or BIOS issue
10. ON-FLASH-FLASH = Modem issue

Depending on the blinking code, you might just need to re-seat or replace your RAM or your CPU. But then again, you could have a more severe motherboard issue.

Nov 01, 2009 | Dell Vostro 1510 Motherboard System Board...

2 Answers

Th42px80u- tv wont come on and red light flashes 10 times


Here are all the Panasonic blink codes.
1 blink STV 5v sense DG Board

2 blinks 15v SOS D Board

3 blinks 3.3v SOS D Board

4 blinks Power SOS P Board

5 blinks 5v SOS D Board

6 blinks Driver SOS 1 SU / SD / SC Boards
(SC energy recovery circuit)

7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)























7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)

Oct 21, 2009 | Panasonic Viera TH-42PX80U Plasma TV

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Mobility Products Health & Beauty Experts

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Colin Taylor

Level 2 Expert

346 Answers

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

Are you a Pride Mobility Products Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...