Question about Computers & Internet

1 Answer

This is what I'm getting every time I start-up my computer. Easy share software cannot openthe collections. below this follows: once you update to a later versionof Easy Share software. you cannot open the collection with an earlier version of the software. It also says to download the latest version go to WWW.kodak.com/go/easysharese. This is all I can relay to you. I don't know what they're talking about. I have a kodak easy share 5300. Please helpe.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,993 Answers

Hello,

First, Go to Start > All programs > Accessories > Run.

Under Run, type msconfig and click ok. A dialogue box will pop out. Select Startup and a list of your startup programs will pop out, look for kodak easy share or easy share. You should find it marked, unmark it and press ok or apply. you can also use this medium to unmark programs you do not want to see on startp. Restart your computer and observe if there would be any changes.

But above doesn't solve the problem, and you don't want to see those messages anymore on start-up, you will have to uninstall Easy share software from your computer.

Go to control panel > Add/Remove programs (for Win xp) or program and features (for win vista or win7). Look for easy share program there and uninstall it from your computer. Restart your computer and observe if you will see those messages again.

If that doesn't solve the problem, then it means you will have to uninstall the Kodak easy share from your computer and install it again.

Lastly, perform a general system update on our computer. This will automatically update the easy share software and it won't ask you to update anymore on startup.

I hope you understand the above. Let me know if it doesn't solve your problem so that I may help you further.

Good luck.

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, l have a kodak printer easy share 5500. I can't find the cd software to install the software onto my computer. Are you able to tell me how l can get another cd.thanks mary


Mary, you can download the software from http://download.Kodak.com/digital/software/easyShare/v8_3_0/install_easyshare.exe

Press the SAVE button, find a place on your hard drive and save the file. Double click the install_easyshare.exe file and it will install the file. Follow the instructions below.

The file is good for KODAK EASYSHARE Software - WINDOWS Operating Systems
Installation Instructions
  1. Verify that your computer meets the system requirements. note.gif NOTE: APPLE QUICKTIME Player is required for some software features. Visit APPLE to download the latest version of the QUICKTIME Player.
  2. Disconnect all accessory devices from your computer (digital camera, camera dock, printer dock, photo printer, card reader, etc.).
  3. Verify that you logged on to the computer using the administrator account.
  4. Close all programs.
  5. Download the software, then follow the on-screen instructions to install the software.
  6. To launch the software select Start > Programs > Kodak > Kodak EasyShare > Kodak Easyshare software.
important.gif IMPORTANT: If you have a large picture collection, allow a few minutes after your computer restarts before starting EASYSHARE Software. EASYSHARE Software windows appear after your previous picture catalog has been updated

After the installation are completed, reboot if not asked to do so. You can copy the install_easyshare.exe file to a CD for later installation if needed.

Good luck and post back to let me know how it went.

Jun 03, 2011 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Needhelp with installation of Kodak easyshare on 7.0 system


This is the instructions on how to remove existing ESS system in order for you to start on a fresh.

Please follow the instructions:
  1. Uninstall Easy Share software:
  2. Select Start > Settings > Control Panel > Add / Remove Programs.
    For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
  3. Select Kodak Easy Share software.
  4. Select Remove (or select Change, and then select Remove).
  5. Run the Clear utility:
  6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
  7. Click the Download button, and then follow the on-screen prompts.
  8. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Feb 08, 2010 | Kodak EasyShare C160 Digital Camera

1 Answer

Keep getting a code 1312x17x4252799284x and want install program.


I?m not sure if you?re fault code is showing on the computer, Easy Share Software, or the camera itself. Therefor I will list 2 possible solutions: If the fault message is on the LCD on the camera: There is no firmware available online for this camera model. Therefor you do need to set up a "repair" with KODAK directly. An Out of Warranty repair for this model for this fault is about 88 pounds + shipping. KODAK also offers a Trade up option where you will have the opportunity to trade up to a newer model 25-30% cheaper than the market price. In order to arrange your repair/Trade up: Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490 If you're experiencing this fault code on the computer: Please do a Clean Install on the Easy Share Software: Please follow the instructions: Uninstall Easy Share software: Select Start > Settings > Control Panel > Add / Remove Programs. For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs. Select Kodak Easy Share software. Select Remove (or select Change, and then select Remove). Run the Clear utility: Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear Click the Download button, and then follow the on-screen prompts. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Jan 20, 2010 | Kodak EasyShare One Digital Camera

1 Answer

Can not email picture from easyshare camera


It is not possible to email directly from the camera.

If you're experiencing emailing difficulties directly from the Easy Share Software:

Please do a Clean Install on the software:
Please follow the instructions:
  1. Uninstall Easy Share software:
  2. Select Start > Settings > Control Panel > Add / Remove Programs.
    For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
  3. Select Kodak Easy Share software.
  4. Select Remove (or select Change, and then select Remove).
  5. Run the Clear utility:
  6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
  7. Click the Download button, and then follow the on-screen prompts.
  8. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Jan 19, 2010 | Kodak EasyShare One Digital Camera

1 Answer

Doesn`t work all the time and makes a whirring noise, do i need to buy a new cd/dvd drive?


Before you beginTo determine if the CD or DVD drive displays on the My Computer screen, follow the steps below.
  1. Turn on the computer and remove any discs from the CD/DVD drive.
  2. In Windows 98 and Me, double-click the My Computer icon on the desktop. In Windows XP, click Start and then My Computer .
  3. A CD/DVD drive icon displays on the My Computer screen when Windows recognizes the drive. If Windows recognizes the drive, find and use a section below that pertains to the CD-writing software with the issue.
  4. If the drive does not display on the My Computer screen, go to the Microsoft support website and search for documents on missing CD DVD drive .
RecordNow by Veritas/HP/Sonic does not recognize the CDRW or DVD+RW driveIf RecordNow does not recognize the CDRW or DVD+RW drive, follow the steps below.
NOTE: Install any updates for the RecordNow engine available on the Sonic support web site (in English). Step 1: Uninstalling RecordNowTo uninstall RecordNow to reset the software and cause it to look for the CDRW or DVD+RW drive again, follow the steps below.
NOTE: The steps below pertain to Windows XP.
  1. Click Start and then Control Panel .
  2. Double-click Add or Remove Programs .
  3. Select Record Now and then click Add/Remove .
  4. Follow the on-screen instructions until the uninstaller finishes.
  5. Select DirectCD and then click Add/Remove .
  6. Follow the on-screen instructions until the uninstaller finishes.
  7. Remove any discs from the drives and restart the computer.
Step 2: Installing RecordNow using Application RecoveryAfter Windows restarts, install the RecordNow software to begin creating CDs.To install the RecordNow software, follow the steps below.
  1. Click Start , All Programs , HP Tools or Compaq Tools , and then Application Recovery .
  2. Click Application Installation and then click Next .
  3. Select HP Record Now or Sonic RecordNow! and then click Install .
  4. The installation automatically installs all files. Follow the on-screen instructions.
  5. Restart the computer after the installation completes.
The HP Record Now or Sonic RecordNow! software should now recognize the CDRW drive. Back to topRoxio (Adaptec's) Easy CD Creator does not detect the CDRW driveEasy CD Creator produces an error message when it is unable to detect the drive, such as: There are currently no supported CD Recorders available...To prevent these errors from occurring, follow the steps below.
NOTE: Windows XP is not compatible with Easy CD Creator 4 and earlier. If the HP Pavilion computer was updated to Windows XP from Windows 98 or Me, use the native CD writing ability in Windows XP or purchase and install CD writing software that is compatible. Step 1: Installing updates for Roxio (Adaptec) Recording Software If the recording software is from Roxio (formerly Adaptec), go to the Roxio software updates page (in English) to obtain any software updates that are available for Easy CD Creator (with or without CD Copier or Direct CD). If Roxio still does not detect the CDRW drive after installing the updates, continue to the next step. Step 2: Changing the CD drive letter back, if it changedUpgrading to Windows 98 or Windows Me can change the drive letter to a different letter and make the drive undetectable to Easy CD Creator. To change the drive letter back to F or another previously designated letter, follow the steps below.
  1. Right-click the My Computer icon on the desktop.
  2. Click Properties . The System Properties window opens.
  3. Click the Device Manager tab.
  4. Click the plus sign next to CD-ROM .
  5. Double-click the CD-ROM name and then click the Settings tab.
  6. Under Reserved drive letters , select M (or the previously assigned letter) from the drop-down list. Be sure that both the Start drive letter and the End drive letter are the same.
  7. Click OK , Close , and then Yes .
  8. Restart the computer. If Easy CD Creator continues to fail to recognize the CDRW drive, continue to the next step.
Step 3: Uninstalling Easy CD CreatorIf the above steps fail to make Easy CD Creator recognize the CDRW, recover Easy CD Creator by uninstalling it. Recovering Easy CD Creator resets the software and causes it to look for the CDRW drive again. Be sure that you have the last recovery disc of your Pavilion recovery disc set before continuing.uninstall Easy CD Creator, Step 4: Installing Easy CD Creator using Application Recovery

Jan 17, 2010 | HP Pavilion dv6000z Notebook

1 Answer

MY COMPUTER CRASHES EVERY TIME I TRY TO UPLOAD PICS AND THEY WANT UPLOAD HELP THIS HAS SHORT VIDEO CLIPS AS WELL IT WILL GO THROUGH THE PROCESS OF SEEING IF THERE ARE DUPLICATES AND AFTER THAT IT ACTS LIKE...


Please reinstall your version of Easy Share software:
Please follow the instructions:
  1. Uninstall Easy Share software:
  2. Select Start > Settings > Control Panel > Add / Remove Programs.
    For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
  3. Select Kodak Easy Share software.
  4. Select Remove (or select Change, and then select Remove).
  5. Run the Clear utility:
  6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
  7. Click the Download button, and then follow the on-screen prompts.
  8. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Jan 12, 2010 | Kodak Easyshare C813 Digital Camera

1 Answer

Recieved Kodak Z915 for Xmas. Follow directions


Please follow the instructions:
  1. Uninstall Easy Share software:
  2. Select Start > Settings > Control Panel > Add / Remove Programs.
    For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
  3. Select Kodak Easy Share software.
  4. Select Remove (or select Change, and then select Remove).
  5. Run the Clear utility:
  6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
  7. Click the Download button, and then follow the on-screen prompts.
  8. After restarting your computer, visit the Kodak Easy Share software Web page at http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=15222/15223&product=EKN036302 and install the latest version of Easy Share software.

Jan 06, 2010 | Kodak EasyShare Z915 Digital Camera

1 Answer

I have a Easy Share C530 and I have Visa the two programs are not working together


You need to upgrade your version to be compatible with Windows Vista: Please do a Clean Install on the software:
Please follow the instructions:
  1. Uninstall Easy Share software:
  2. Select Start > Settings > Control Panel > Add / Remove Programs.
    For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
  3. Select Kodak Easy Share software.
  4. Select Remove (or select Change, and then select Remove).
  5. Run the Clear utility:
  6. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
  7. Click the Download button, and then follow the on-screen prompts.
  8. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Dec 21, 2009 | Kodak EasyShare One Digital Camera

1 Answer

Can't get easyshare to start download


If this fault message is on your computer starting Easy Share Software: Please do a Clean Install on the software:
Please follow the instructions:
  1. Uninstall Easy Share software:
    1. Select Start > Settings > Control Panel > Add / Remove Programs.
      For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
    2. Select Kodak Easy Share software.
    3. Select Remove (or select Change, and then select Remove).
  2. Run the Clear utility:
    1. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
    2. Click the Download button, and then follow the on-screen prompts.
  3. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Dec 16, 2009 | Kodak EasyShare V1003 Digital Camera

1 Answer

Norton antivirus liveupdate


1) Close all Norton applications.

2) Moved file [ccWebWnd.dll]
from [C:\Program Files\Common Files\Symantec Shared\]
to [C:\_My Files\_TEMP]

3) Run LiveUpdate
Type [C:\Program Files\Symantec\LiveUpdate\LUAll.exe]
into Windows Explorer Address bar and hit [Enter]

4) Restart your computer.

5) Moved file [ccWebWnd.dll]
from [C:\_My Files\_TEMP]
to [C:\Program Files\Common Files\Symantec Shared\]

6) Run Norton SystemWorks LiveUpdate from your Windows Start Menu.

7) Restart your computer.

Dec 16, 2008 | Symantec Norton AntiVirus 2008: Windows

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...